no screen i810 module
Please help me;
I have a p4 1.8 ghz with an integrated intel graphics card Knoppix boots fine, and loads up with i830 and agpgart. Debian doesnt, and I get this error when trying to load X (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.2 (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815 (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (EE) No devices detected. Fatal server error: no screens found Please help, and I have tried removing X11config-4 and trying startx thanks |
I should also add that when I modprobe agpgart i get :
newman:/usr/X11R6/bin# modprobe agpgart /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: insmod /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o failed /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: insmod agpgart failed ___ dmesg returns : Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 196M agpgart: no supported devices found. __ I also tried the newest Xfree86(4.3.99) and included a i810_drv.o module from the xfree86 website that didnt work, and lspci says 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 01) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 01) Thanks for all the help |
I should also add that when I modprobe agpgart i get :
newman:/usr/X11R6/bin# modprobe agpgart /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: insmod /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o failed /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: insmod agpgart failed ___ dmesg returns : Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 196M agpgart: no supported devices found. __ I also tried the newest Xfree86(4.3.99) and included a i810_drv.o module from the xfree86 website that didnt work, and lspci says 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 01) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 01) Thanks for all the help |
I should also add that when I modprobe agpgart i get :
newman:/usr/X11R6/bin# modprobe agpgart /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: insmod /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o failed /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: insmod agpgart failed ___ dmesg returns : Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 196M agpgart: no supported devices found. __ I also tried the newest Xfree86(4.3.99) and included a i810_drv.o module from the xfree86 website that didnt work, and lspci says 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 01) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 01) Thanks for all the help |
I should also add that when I modprobe agpgart i get :
newman:/usr/X11R6/bin# modprobe agpgart /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: insmod /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o failed /lib/modules/2.4.18-bf2.4/kernel/drivers/char/agp/agpgart.o: insmod agpgart failed ___ dmesg returns : Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 196M agpgart: no supported devices found. __ I also tried the newest Xfree86(4.3.99) and included a i810_drv.o module from the xfree86 website that didnt work, and lspci says 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 01) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 01) Thanks for all the help |
All times are GMT -5. The time now is 11:25 PM. |