LinuxQuestions.org

LinuxQuestions.org (http://www.linuxquestions.org/questions/index.php)
-   Linux - Hardware (http://www.linuxquestions.org/questions/forumdisplay.php?f=18)
-   -   lilo then blank! but still booting (http://www.linuxquestions.org/questions/showthread.php?t=4175461162)

j paul f 05-08-2013 10:27 AM

lilo then blank! but still booting
 
when booting after the lilo screen instead of seeing the text of the kernal loading i some times just get a black screen.
the drive ligth on the front of my pc flshes as the kernal loads.
then after a sutable pause i enter ROOT ENTER PASSWORD ENTER THAR STARTX ENTER all without anything on the screen
after several minits the screen comes on.

this is not a problem with my newly instaled slackware 14 because the vista on the other hard drive dose somthing similer.

Code:

bash-4.2# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.29 (root@hive) (gcc version 4.7.1 (GCC) ) #2 Mon Sep 17 14:10:59 CDT 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005f7c0000 (usable)
[    0.000000]  BIOS-e820: 000000005f7c0000 - 000000005f7ce000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005f7ce000 - 000000005f800000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI present.
[    0.000000] DMI: Compaq-Presario GM274AA-ABU SR5109UK/Lucknow, BIOS v5.13 11/26/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x5f7c0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]  00000-9FFFF write-back
[    0.000000]  A0000-DFFFF uncachable
[    0.000000]  E0000-EFFFF write-through
[    0.000000]  F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]  0 base 000000000 mask FC0000000 write-back
[    0.000000]  1 base 040000000 mask FE0000000 write-back
[    0.000000]  2 base 05F800000 mask FFF800000 uncachable
[    0.000000]  3 disabled
[    0.000000]  4 disabled
[    0.000000]  5 disabled
[    0.000000]  6 disabled
[    0.000000]  7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 02400000
[    0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 23fb000-2400000
[    0.000000] ACPI: RSDP 000f9840 00014 (v00 HPQOEM)
[    0.000000] ACPI: RSDT 5f7c0000 00040 (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: FACP 5f7c0200 00084 (v02 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: DSDT 5f7c0600 05322 (v01 HPQOEM SLIC-CPC 00000013 INTL 20051117)
[    0.000000] ACPI: FACS 5f7ce000 00040
[    0.000000] ACPI: APIC 5f7c0390 0006C (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: MCFG 5f7c0440 0003C (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: SLIC 5f7c0480 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[    0.000000] ACPI: DBGP 5f7c0400 00034 (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: OEMB 5f7ce040 00061 (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: HPET 5f7c59d0 00038 (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 639MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]  mapped low ram: 0 - 377fe000
[    0.000000]  low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]  DMA      0x00000010 -> 0x00001000
[    0.000000]  Normal  0x00001000 -> 0x000377fe
[    0.000000]  HighMem  0x000377fe -> 0x0005f7c0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]    0: 0x00000010 -> 0x0000009f
[    0.000000]    0: 0x00000100 -> 0x0005f7c0
[    0.000000] On node 0 totalpages: 390991
[    0.000000] free_area_init_node: node 0, pgdat c1d1fe80, node_mem_map f6c0d200
[    0.000000]  DMA zone: 32 pages used for memmap
[    0.000000]  DMA zone: 0 pages reserved
[    0.000000]  DMA zone: 3951 pages, LIFO batch:0
[    0.000000]  Normal zone: 1744 pages used for memmap
[    0.000000]  Normal zone: 221486 pages, LIFO batch:31
[    0.000000]  HighMem zone: 1280 pages used for memmap
[    0.000000]  HighMem zone: 162498 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 5f800000 (gap: 5f800000:9f600000)
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387935
[    0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=802 vt.default_utf8=0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 6257408 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0005f7c0)
[    0.000000] Memory: 1529668k/1564416k available (10227k kernel code, 34296k reserved, 3257k data, 620k init, 655112k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]    fixmap  : 0xfffa2000 - 0xfffff000  ( 372 kB)
[    0.000000]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)
[    0.000000]    vmalloc : 0xf7ffe000 - 0xff7fe000  ( 120 MB)
[    0.000000]    lowmem  : 0xc0000000 - 0xf77fe000  ( 887 MB)
[    0.000000]      .init : 0xc1d2c000 - 0xc1dc7000  ( 620 kB)
[    0.000000]      .data : 0xc19fcc7c - 0xc1d2b200  (3257 kB)
[    0.000000]      .text : 0xc1000000 - 0xc19fcc7c  (10227 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1596.258 MHz processor.
[    0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.51 BogoMIPS (lpj=1596258)
[    0.001115] pid_max: default: 32768 minimum: 301
[    0.002028] Security Framework initialized
[    0.002098] Mount-cache hash table entries: 512
[    0.002276] Initializing cgroup subsys cpuacct
[    0.002334] Initializing cgroup subsys memory
[    0.002395] Initializing cgroup subsys devices
[    0.002450] Initializing cgroup subsys freezer
[    0.002506] Initializing cgroup subsys net_cls
[    0.002562] Initializing cgroup subsys blkio
[    0.002621] Initializing cgroup subsys perf_event
[    0.002711] mce: CPU supports 6 MCE banks
[    0.002773] CPU0: Thermal monitoring enabled (TM2)
[    0.002830] using mwait in idle threads.
[    0.002892] CPU: Genuine Intel(R) CPU            2140  @ 1.60GHz stepping 02
[    0.003182] ACPI: Core revision 20110623
[    0.007012] ftrace: allocating 34430 entries in 68 pages
[    0.008049] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.009103] PEBS disabled due to CPU errata.
[    0.009160] ... version:                2
[    0.009215] ... bit width:              40
[    0.009270] ... generic registers:      2
[    0.009325] ... value mask:            000000ffffffffff
[    0.009381] ... max period:            000000007fffffff
[    0.009437] ... fixed-purpose events:  3
[    0.009492] ... event mask:            0000000700000003
[    0.009658] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.009999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020998] devtmpfs: initialized
[    0.020998] PM: Registering ACPI NVS region at 5f7ce000 (204800 bytes)
[    0.020998] xor: automatically using best checksumming function: pIII_sse
[    0.025000]    pIII_sse  :  5908.000 MB/sec
[    0.025055] xor: using function: pIII_sse (5908.000 MB/sec)
[    0.025118] atomic64 test passed for i386+ platform with CX8 and with SSE
[    0.025354] print_constraints: dummy:
[    0.025489] NET: Registered protocol family 16
[    0.025861] ACPI: bus type pci registered
[    0.026076] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.026166] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[    0.026257] PCI: not using MMCONFIG
[    0.026495] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[    0.026552] PCI: Using configuration type 1 for base access
[    0.045627] bio: create slab <bio-0> at 0
[    0.062087] raid6: int32x1    605 MB/s
[    0.079012] raid6: int32x2    492 MB/s
[    0.096064] raid6: int32x4    437 MB/s
[    0.113063] raid6: int32x8    511 MB/s
[    0.130016] raid6: mmxx1    2117 MB/s
[    0.147011] raid6: mmxx2    2410 MB/s
[    0.163992] raid6: sse1x1    1339 MB/s
[    0.180994] raid6: sse1x2    1753 MB/s
[    0.198003] raid6: sse2x1    2468 MB/s
[    0.214983] raid6: sse2x2    2980 MB/s
[    0.215037] raid6: using algorithm sse2x2 (2980 MB/s)
[    0.215148] ACPI: Added _OSI(Module Device)
[    0.215204] ACPI: Added _OSI(Processor Device)
[    0.215259] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.215316] ACPI: Added _OSI(Processor Aggregator Device)
[    0.216131] ACPI: EC: Look up EC in DSDT
[    0.217009] ACPI: Executed 1 blocks of module-level executable AML code
[    0.220389] ACPI: SSDT 5f7ce0b0 001D2 (v01    AMI  CPU1PM 00000001 INTL 20051117)
[    0.220727] ACPI: Dynamic OEM Table Load:
[    0.220825] ACPI: SSDT  (null) 001D2 (v01    AMI  CPU1PM 00000001 INTL 20051117)
[    0.221166] ACPI: Interpreter enabled
[    0.221232] ACPI: (supports S0 S3 S4 S5)
[    0.221394] ACPI: Using IOAPIC for interrupt routing
[    0.230681] ACPI: No dock devices found.
[    0.230739] HEST: Table not found.
[    0.230798] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.231132] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.231426] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.231430] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.231434] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.231437] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.231441] pci_root PNP0A08:00: host bridge window [mem 0x5f800000-0xffffffff] (ignored)
[    0.231455] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600
[    0.231504] pci 0000:00:02.0: [8086:2772] type 0 class 0x000300
[    0.231516] pci 0000:00:02.0: reg 10: [mem 0xffa80000-0xffafffff]
[    0.231523] pci 0000:00:02.0: reg 14: [io  0xec00-0xec07]
[    0.231530] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.231537] pci 0000:00:02.0: reg 1c: [mem 0xffa40000-0xffa7ffff]
[    0.231610] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.231625] pci 0000:00:1b.0: reg 10: [mem 0xffa3c000-0xffa3ffff 64bit]
[    0.231697] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.231703] pci 0000:00:1b.0: PME# disabled
[    0.231725] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.231797] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.231801] pci 0000:00:1c.0: PME# disabled
[    0.231823] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.231895] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.231899] pci 0000:00:1c.1: PME# disabled
[    0.231923] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.231965] pci 0000:00:1d.0: reg 20: [io  0xe000-0xe01f]
[    0.232002] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.232044] pci 0000:00:1d.1: reg 20: [io  0xdc00-0xdc1f]
[    0.232076] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.232117] pci 0000:00:1d.2: reg 20: [io  0xd880-0xd89f]
[    0.232150] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.232191] pci 0000:00:1d.3: reg 20: [io  0xd800-0xd81f]
[    0.232232] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.232252] pci 0000:00:1d.7: reg 10: [mem 0xffa3bc00-0xffa3bfff]
[    0.232336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.232341] pci 0000:00:1d.7: PME# disabled
[    0.232359] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.232426] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[    0.232510] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.232639] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[    0.232653] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.232663] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.232673] pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
[    0.232683] pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
[    0.232693] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.232730] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[    0.232745] pci 0000:00:1f.2: reg 10: [io  0xe880-0xe887]
[    0.232754] pci 0000:00:1f.2: reg 14: [io  0xe800-0xe803]
[    0.232763] pci 0000:00:1f.2: reg 18: [io  0xe480-0xe487]
[    0.232772] pci 0000:00:1f.2: reg 1c: [io  0xe400-0xe403]
[    0.232781] pci 0000:00:1f.2: reg 20: [io  0xe080-0xe08f]
[    0.232818] pci 0000:00:1f.2: PME# supported from D3hot
[    0.232822] pci 0000:00:1f.2: PME# disabled
[    0.232836] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.232888] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.232963] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.233047] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[    0.233065] pci 0000:02:00.0: reg 10: [io  0xc800-0xc8ff]
[    0.233099] pci 0000:02:00.0: reg 18: [mem 0xff7ff000-0xff7fffff 64bit]
[    0.233137] pci 0000:02:00.0: reg 30: [mem 0xff7c0000-0xff7dffff pref]
[    0.233220] pci 0000:02:00.0: supports D1 D2
[    0.233223] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.233229] pci 0000:02:00.0: PME# disabled
[    0.233243] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.233341] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.233400] pci 0000:00:1c.1:  bridge window [io  0xc000-0xcfff]
[    0.233405] pci 0000:00:1c.1:  bridge window [mem 0xff700000-0xff7fffff]
[    0.233443] pci 0000:03:01.0: [1131:7133] type 0 class 0x000480
[    0.233462] pci 0000:03:01.0: reg 10: [mem 0xff8ff800-0xff8fffff]
[    0.233540] pci 0000:03:01.0: supports D1 D2
[    0.233584] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.233647] pci 0000:00:1e.0:  bridge window [mem 0xff800000-0xff8fffff]
[    0.233654] pci 0000:00:1e.0:  bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.233657] pci 0000:00:1e.0:  bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.233673] pci_bus 0000:00: on NUMA node 0
[    0.233677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.233858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.234036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.234094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.234313]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.242505] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.242881] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.243260] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.243629] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.244011] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.244452] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.244893] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.245251] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.245777] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.245980] vgaarb: loaded
[    0.246033] vgaarb: bridge control possible 0000:00:02.0
[    0.246300] SCSI subsystem initialized
[    0.247025] libata version 3.00 loaded.
[    0.247130] usbcore: registered new interface driver usbfs

...............

 
[    8.453532] usbcore: registered new interface driver usblp
[    8.643058] IR RC5(x) protocol handler initialized
[    8.677440] IR RC6 protocol handler initialized
[    8.886664] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[    8.886969] generic-usb 0003:062A:3286.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1/input0
[    8.892367] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input5
[    8.894333] generic-usb 0003:062A:3286.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1/input1
[    8.940579] IR JVC protocol handler initialized
[    8.966019] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input6
[    8.967169] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.3-2/input0
[    8.987925] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input7
[    8.988888] generic-usb 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.3-2/input1
[    8.989285] usbcore: registered new interface driver usbhid
[    8.989345] usbhid: USB HID core driver
[    9.003747] [drm] Initialized drm 1.1.0 20060810
[    9.058906] IR Sony protocol handler initialized
[    9.099470] IR MCE Keyboard/mouse protocol handler initialized
[    9.130276] lirc_dev: IR Remote Control driver registered, major 245
[    9.140637] IR LIRC bridge handler initialized
[    9.319378] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[    9.319511] saa7134 0000:03:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.319575] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 22, latency: 64, mmio: 0xff8ff800
[    9.319668] saa7133[0]: subsystem: 1461:f01d, board: Avermedia Super 007 [card=117,autodetected]
[    9.319773] saa7133[0]: board init: gpio is 40000
[    9.459026] saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[    9.459512] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[    9.459964] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff
[    9.460423] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.460881] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff
[    9.461341] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.461794] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.462254] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.462710] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.463167] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.463623] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.464079] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.464536] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.464993] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.465449] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.465904] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.742475] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.742544] i915 0000:00:02.0: setting latency timer to 64
[    9.763917] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.763983] [drm] Driver supports precise vblank timestamp query.
[    9.764463] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.788174] [drm] initialized overlay support
[    9.857726] i2c-core: driver [tuner] using legacy suspend method
[    9.857788] i2c-core: driver [tuner] using legacy resume method
[    9.859231] fbcon: inteldrmfb (fb0) is primary device
[    9.895896] Console: switching to colour frame buffer device 160x64
[    9.904074] fb0: inteldrmfb frame buffer device
[    9.904116] drm: registered panic notifier
[    9.911012] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.956014] tuner 1-004b: Tuner -1 found with type(s) Radio TV.
[    9.991006] tda829x 1-004b: setting tuner address to 60
[  10.039029] tda829x 1-004b: type set to tda8290+75a
[  12.707270] saa7133[0]: registered device video0 [v4l2]
[  12.707402] saa7133[0]: registered device vbi0
[  12.771958] dvb_init() allocating 1 frontend
[  12.781034] DVB: registering new adapter (saa7133[0])
[  12.781110] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[  12.811026] tda1004x: setting up plls for 48MHz sampling clock
[  13.901295] Adding 3903756k swap on /dev/sda1.  Priority:-1 extents:1 across:3903756k
[  14.021170] fuse init (API version 7.17)
[  14.661470] EXT4-fs (sda2): re-mounted. Opts: (null)
[  14.970007] tda1004x: timeout waiting for DSP ready
[  14.980040] tda1004x: found firmware revision 0 -- invalid
[  14.980113] tda1004x: trying to boot from eeprom
[  15.459417] ppdev: user-space parallel port driver
[  15.471954] lp: driver loaded but no devices found
[  16.928006] tda1004x: found firmware revision 0 -- invalid
[  16.928082] tda1004x: waiting for firmware upload...
[  16.951278] tda1004x: no firmware upload (timeout or file not found?)
[  16.951345] tda1004x: firmware upload failed
[  17.069274] saa7134 ALSA driver for DMA sound loaded
[  17.072100] saa7133[0]/alsa: saa7133[0] at 0xff8ff800 irq 22 registered as card -1
[  21.025800] intel_rng: FWH not detected
[  21.026305] leds_ss4200: no LED devices found
[  23.120303] r8169 0000:02:00.0: eth0: link down
[  23.120312] r8169 0000:02:00.0: eth0: link down
[  24.735749] r8169 0000:02:00.0: eth0: link up
[  32.060028] NET: Registered protocol family 10
[  42.898026] eth0: no IPv6 routers present
[  86.964561] ata1.00: configured for UDMA/100
[  86.964569] ata1: EH complete
[  87.307154] ata3.00: configured for UDMA/100
[  87.307163] ata3: EH complete
[  89.017043] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 3982.151506] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev- instead
[ 3982.155417] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev- instead
[ 4189.645917] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev- instead
[ 4189.658886] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev- instead

the 2 bits that seem relivant are at 0.245
and 9.76
Code:

bash-4.2# lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
03:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)

bash-4.2# lshw
bash: lshw: command not found


ithink it may be bad info on the bios ? how can i check?

there are 4 other threds but i am too much of a newby
to follow them

j paul f 05-09-2013 08:38 AM

switching to a graphical login seems to get me up and running faster.
i still dont see all of the kernal loading.

Leeloo 05-16-2013 06:39 AM

when you enter the lilo ,
press Tab
the boot like this
"linux nomodeset"
it should be OK,
install your driver then.
BTW , when you installing your slackware,did you choose to install lilo automatically,or install lilo manually ? If you can boot your slackware by your CD install image,please copy your lilo.config and let me check


All times are GMT -5. The time now is 01:07 PM.