LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
LinkBack Search this Thread
Old 05-08-2013, 10:27 AM   #1
j paul f
LQ Newbie
 
Registered: May 2013
Posts: 6

Rep: Reputation: Disabled
lilo then blank! but still booting


when booting after the lilo screen instead of seeing the text of the kernal loading i some times just get a black screen.
the drive ligth on the front of my pc flshes as the kernal loads.
then after a sutable pause i enter ROOT ENTER PASSWORD ENTER THAR STARTX ENTER all without anything on the screen
after several minits the screen comes on.

this is not a problem with my newly instaled slackware 14 because the vista on the other hard drive dose somthing similer.

Code:
bash-4.2# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.29 (root@hive) (gcc version 4.7.1 (GCC) ) #2 Mon Sep 17 14:10:59 CDT 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005f7c0000 (usable)
[    0.000000]  BIOS-e820: 000000005f7c0000 - 000000005f7ce000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005f7ce000 - 000000005f800000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI present.
[    0.000000] DMI: Compaq-Presario GM274AA-ABU SR5109UK/Lucknow, BIOS v5.13 11/26/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x5f7c0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 base 05F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 02400000
[    0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 23fb000-2400000
[    0.000000] ACPI: RSDP 000f9840 00014 (v00 HPQOEM)
[    0.000000] ACPI: RSDT 5f7c0000 00040 (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: FACP 5f7c0200 00084 (v02 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: DSDT 5f7c0600 05322 (v01 HPQOEM SLIC-CPC 00000013 INTL 20051117)
[    0.000000] ACPI: FACS 5f7ce000 00040
[    0.000000] ACPI: APIC 5f7c0390 0006C (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: MCFG 5f7c0440 0003C (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: SLIC 5f7c0480 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[    0.000000] ACPI: DBGP 5f7c0400 00034 (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: OEMB 5f7ce040 00061 (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: HPET 5f7c59d0 00038 (v01 HPQOEM SLIC-CPC 20071126 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 639MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0005f7c0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005f7c0
[    0.000000] On node 0 totalpages: 390991
[    0.000000] free_area_init_node: node 0, pgdat c1d1fe80, node_mem_map f6c0d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1280 pages used for memmap
[    0.000000]   HighMem zone: 162498 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 5f800000 (gap: 5f800000:9f600000)
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387935
[    0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=802 vt.default_utf8=0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 6257408 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0005f7c0)
[    0.000000] Memory: 1529668k/1564416k available (10227k kernel code, 34296k reserved, 3257k data, 620k init, 655112k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1d2c000 - 0xc1dc7000   ( 620 kB)
[    0.000000]       .data : 0xc19fcc7c - 0xc1d2b200   (3257 kB)
[    0.000000]       .text : 0xc1000000 - 0xc19fcc7c   (10227 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1596.258 MHz processor.
[    0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.51 BogoMIPS (lpj=1596258)
[    0.001115] pid_max: default: 32768 minimum: 301
[    0.002028] Security Framework initialized
[    0.002098] Mount-cache hash table entries: 512
[    0.002276] Initializing cgroup subsys cpuacct
[    0.002334] Initializing cgroup subsys memory
[    0.002395] Initializing cgroup subsys devices
[    0.002450] Initializing cgroup subsys freezer
[    0.002506] Initializing cgroup subsys net_cls
[    0.002562] Initializing cgroup subsys blkio
[    0.002621] Initializing cgroup subsys perf_event
[    0.002711] mce: CPU supports 6 MCE banks
[    0.002773] CPU0: Thermal monitoring enabled (TM2)
[    0.002830] using mwait in idle threads.
[    0.002892] CPU: Genuine Intel(R) CPU            2140  @ 1.60GHz stepping 02
[    0.003182] ACPI: Core revision 20110623
[    0.007012] ftrace: allocating 34430 entries in 68 pages
[    0.008049] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.009103] PEBS disabled due to CPU errata.
[    0.009160] ... version:                2
[    0.009215] ... bit width:              40
[    0.009270] ... generic registers:      2
[    0.009325] ... value mask:             000000ffffffffff
[    0.009381] ... max period:             000000007fffffff
[    0.009437] ... fixed-purpose events:   3
[    0.009492] ... event mask:             0000000700000003
[    0.009658] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.009999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020998] devtmpfs: initialized
[    0.020998] PM: Registering ACPI NVS region at 5f7ce000 (204800 bytes)
[    0.020998] xor: automatically using best checksumming function: pIII_sse
[    0.025000]    pIII_sse  :  5908.000 MB/sec
[    0.025055] xor: using function: pIII_sse (5908.000 MB/sec)
[    0.025118] atomic64 test passed for i386+ platform with CX8 and with SSE
[    0.025354] print_constraints: dummy: 
[    0.025489] NET: Registered protocol family 16
[    0.025861] ACPI: bus type pci registered
[    0.026076] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.026166] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[    0.026257] PCI: not using MMCONFIG
[    0.026495] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[    0.026552] PCI: Using configuration type 1 for base access
[    0.045627] bio: create slab <bio-0> at 0
[    0.062087] raid6: int32x1    605 MB/s
[    0.079012] raid6: int32x2    492 MB/s
[    0.096064] raid6: int32x4    437 MB/s
[    0.113063] raid6: int32x8    511 MB/s
[    0.130016] raid6: mmxx1     2117 MB/s
[    0.147011] raid6: mmxx2     2410 MB/s
[    0.163992] raid6: sse1x1    1339 MB/s
[    0.180994] raid6: sse1x2    1753 MB/s
[    0.198003] raid6: sse2x1    2468 MB/s
[    0.214983] raid6: sse2x2    2980 MB/s
[    0.215037] raid6: using algorithm sse2x2 (2980 MB/s)
[    0.215148] ACPI: Added _OSI(Module Device)
[    0.215204] ACPI: Added _OSI(Processor Device)
[    0.215259] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.215316] ACPI: Added _OSI(Processor Aggregator Device)
[    0.216131] ACPI: EC: Look up EC in DSDT
[    0.217009] ACPI: Executed 1 blocks of module-level executable AML code
[    0.220389] ACPI: SSDT 5f7ce0b0 001D2 (v01    AMI   CPU1PM 00000001 INTL 20051117)
[    0.220727] ACPI: Dynamic OEM Table Load:
[    0.220825] ACPI: SSDT   (null) 001D2 (v01    AMI   CPU1PM 00000001 INTL 20051117)
[    0.221166] ACPI: Interpreter enabled
[    0.221232] ACPI: (supports S0 S3 S4 S5)
[    0.221394] ACPI: Using IOAPIC for interrupt routing
[    0.230681] ACPI: No dock devices found.
[    0.230739] HEST: Table not found.
[    0.230798] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.231132] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.231426] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.231430] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.231434] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.231437] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.231441] pci_root PNP0A08:00: host bridge window [mem 0x5f800000-0xffffffff] (ignored)
[    0.231455] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600
[    0.231504] pci 0000:00:02.0: [8086:2772] type 0 class 0x000300
[    0.231516] pci 0000:00:02.0: reg 10: [mem 0xffa80000-0xffafffff]
[    0.231523] pci 0000:00:02.0: reg 14: [io  0xec00-0xec07]
[    0.231530] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.231537] pci 0000:00:02.0: reg 1c: [mem 0xffa40000-0xffa7ffff]
[    0.231610] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.231625] pci 0000:00:1b.0: reg 10: [mem 0xffa3c000-0xffa3ffff 64bit]
[    0.231697] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.231703] pci 0000:00:1b.0: PME# disabled
[    0.231725] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.231797] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.231801] pci 0000:00:1c.0: PME# disabled
[    0.231823] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.231895] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.231899] pci 0000:00:1c.1: PME# disabled
[    0.231923] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.231965] pci 0000:00:1d.0: reg 20: [io  0xe000-0xe01f]
[    0.232002] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.232044] pci 0000:00:1d.1: reg 20: [io  0xdc00-0xdc1f]
[    0.232076] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.232117] pci 0000:00:1d.2: reg 20: [io  0xd880-0xd89f]
[    0.232150] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.232191] pci 0000:00:1d.3: reg 20: [io  0xd800-0xd81f]
[    0.232232] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.232252] pci 0000:00:1d.7: reg 10: [mem 0xffa3bc00-0xffa3bfff]
[    0.232336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.232341] pci 0000:00:1d.7: PME# disabled
[    0.232359] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.232426] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[    0.232510] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.232639] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[    0.232653] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.232663] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.232673] pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
[    0.232683] pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
[    0.232693] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.232730] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[    0.232745] pci 0000:00:1f.2: reg 10: [io  0xe880-0xe887]
[    0.232754] pci 0000:00:1f.2: reg 14: [io  0xe800-0xe803]
[    0.232763] pci 0000:00:1f.2: reg 18: [io  0xe480-0xe487]
[    0.232772] pci 0000:00:1f.2: reg 1c: [io  0xe400-0xe403]
[    0.232781] pci 0000:00:1f.2: reg 20: [io  0xe080-0xe08f]
[    0.232818] pci 0000:00:1f.2: PME# supported from D3hot
[    0.232822] pci 0000:00:1f.2: PME# disabled
[    0.232836] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.232888] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.232963] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.233047] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[    0.233065] pci 0000:02:00.0: reg 10: [io  0xc800-0xc8ff]
[    0.233099] pci 0000:02:00.0: reg 18: [mem 0xff7ff000-0xff7fffff 64bit]
[    0.233137] pci 0000:02:00.0: reg 30: [mem 0xff7c0000-0xff7dffff pref]
[    0.233220] pci 0000:02:00.0: supports D1 D2
[    0.233223] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.233229] pci 0000:02:00.0: PME# disabled
[    0.233243] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.233341] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.233400] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
[    0.233405] pci 0000:00:1c.1:   bridge window [mem 0xff700000-0xff7fffff]
[    0.233443] pci 0000:03:01.0: [1131:7133] type 0 class 0x000480
[    0.233462] pci 0000:03:01.0: reg 10: [mem 0xff8ff800-0xff8fffff]
[    0.233540] pci 0000:03:01.0: supports D1 D2
[    0.233584] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.233647] pci 0000:00:1e.0:   bridge window [mem 0xff800000-0xff8fffff]
[    0.233654] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.233657] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.233673] pci_bus 0000:00: on NUMA node 0
[    0.233677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.233858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.234036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.234094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.234313]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.242505] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.242881] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.243260] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.243629] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.244011] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.244452] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.244893] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.245251] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.245777] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.245980] vgaarb: loaded
[    0.246033] vgaarb: bridge control possible 0000:00:02.0
[    0.246300] SCSI subsystem initialized
[    0.247025] libata version 3.00 loaded.
[    0.247130] usbcore: registered new interface driver usbfs

...............

 
[    8.453532] usbcore: registered new interface driver usblp
[    8.643058] IR RC5(x) protocol handler initialized
[    8.677440] IR RC6 protocol handler initialized
[    8.886664] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[    8.886969] generic-usb 0003:062A:3286.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1/input0
[    8.892367] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input5
[    8.894333] generic-usb 0003:062A:3286.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1/input1
[    8.940579] IR JVC protocol handler initialized
[    8.966019] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input6
[    8.967169] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.3-2/input0
[    8.987925] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input7
[    8.988888] generic-usb 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.3-2/input1
[    8.989285] usbcore: registered new interface driver usbhid
[    8.989345] usbhid: USB HID core driver
[    9.003747] [drm] Initialized drm 1.1.0 20060810
[    9.058906] IR Sony protocol handler initialized
[    9.099470] IR MCE Keyboard/mouse protocol handler initialized
[    9.130276] lirc_dev: IR Remote Control driver registered, major 245 
[    9.140637] IR LIRC bridge handler initialized
[    9.319378] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[    9.319511] saa7134 0000:03:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.319575] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 22, latency: 64, mmio: 0xff8ff800
[    9.319668] saa7133[0]: subsystem: 1461:f01d, board: Avermedia Super 007 [card=117,autodetected]
[    9.319773] saa7133[0]: board init: gpio is 40000
[    9.459026] saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[    9.459512] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[    9.459964] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff
[    9.460423] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.460881] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff
[    9.461341] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.461794] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.462254] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.462710] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.463167] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.463623] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.464079] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.464536] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.464993] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.465449] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.465904] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.742475] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.742544] i915 0000:00:02.0: setting latency timer to 64
[    9.763917] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.763983] [drm] Driver supports precise vblank timestamp query.
[    9.764463] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.788174] [drm] initialized overlay support
[    9.857726] i2c-core: driver [tuner] using legacy suspend method
[    9.857788] i2c-core: driver [tuner] using legacy resume method
[    9.859231] fbcon: inteldrmfb (fb0) is primary device
[    9.895896] Console: switching to colour frame buffer device 160x64
[    9.904074] fb0: inteldrmfb frame buffer device
[    9.904116] drm: registered panic notifier
[    9.911012] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.956014] tuner 1-004b: Tuner -1 found with type(s) Radio TV.
[    9.991006] tda829x 1-004b: setting tuner address to 60
[   10.039029] tda829x 1-004b: type set to tda8290+75a
[   12.707270] saa7133[0]: registered device video0 [v4l2]
[   12.707402] saa7133[0]: registered device vbi0
[   12.771958] dvb_init() allocating 1 frontend
[   12.781034] DVB: registering new adapter (saa7133[0])
[   12.781110] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   12.811026] tda1004x: setting up plls for 48MHz sampling clock
[   13.901295] Adding 3903756k swap on /dev/sda1.  Priority:-1 extents:1 across:3903756k 
[   14.021170] fuse init (API version 7.17)
[   14.661470] EXT4-fs (sda2): re-mounted. Opts: (null)
[   14.970007] tda1004x: timeout waiting for DSP ready
[   14.980040] tda1004x: found firmware revision 0 -- invalid
[   14.980113] tda1004x: trying to boot from eeprom
[   15.459417] ppdev: user-space parallel port driver
[   15.471954] lp: driver loaded but no devices found
[   16.928006] tda1004x: found firmware revision 0 -- invalid
[   16.928082] tda1004x: waiting for firmware upload...
[   16.951278] tda1004x: no firmware upload (timeout or file not found?)
[   16.951345] tda1004x: firmware upload failed
[   17.069274] saa7134 ALSA driver for DMA sound loaded
[   17.072100] saa7133[0]/alsa: saa7133[0] at 0xff8ff800 irq 22 registered as card -1
[   21.025800] intel_rng: FWH not detected
[   21.026305] leds_ss4200: no LED devices found
[   23.120303] r8169 0000:02:00.0: eth0: link down
[   23.120312] r8169 0000:02:00.0: eth0: link down
[   24.735749] r8169 0000:02:00.0: eth0: link up
[   32.060028] NET: Registered protocol family 10
[   42.898026] eth0: no IPv6 routers present
[   86.964561] ata1.00: configured for UDMA/100
[   86.964569] ata1: EH complete
[   87.307154] ata3.00: configured for UDMA/100
[   87.307163] ata3: EH complete
[   89.017043] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 3982.151506] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev- instead
[ 3982.155417] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev- instead
[ 4189.645917] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev- instead
[ 4189.658886] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev- instead
the 2 bits that seem relivant are at 0.245
and 9.76
Code:
bash-4.2# lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
03:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
bash-4.2# lshw
bash: lshw: command not found


ithink it may be bad info on the bios ? how can i check?

there are 4 other threds but i am too much of a newby
to follow them

Last edited by onebuck; 05-09-2013 at 07:19 AM. Reason: Please use VBcode tags, mod edit to clean post
 
Old 05-09-2013, 08:38 AM   #2
j paul f
LQ Newbie
 
Registered: May 2013
Posts: 6

Original Poster
Rep: Reputation: Disabled
switching to a graphical login seems to get me up and running faster.
i still dont see all of the kernal loading.
 
Old 05-16-2013, 06:39 AM   #3
Leeloo
LQ Newbie
 
Registered: May 2013
Posts: 4

Rep: Reputation: Disabled
when you enter the lilo ,
press Tab
the boot like this
"linux nomodeset"
it should be OK,
install your driver then.
BTW , when you installing your slackware,did you choose to install lilo automatically,or install lilo manually ? If you can boot your slackware by your CD install image,please copy your lilo.config and let me check
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blank Lilo SyCo123 Linux - Laptop and Netbook 5 02-21-2008 11:04 PM
blank screen at boot when using lilo FB wufo Slackware 5 11-20-2007 10:03 PM
LILO, Dual Booting, LILO.CONF... :(... CharlesWinston Linux - Software 6 04-23-2007 10:10 PM
lilo trashed, when booting from cd, lilo command is not present wakeboarder3780 Linux - Software 3 03-23-2006 05:02 PM
Lilo then BLANK! (Slackware 10.2) liquidrabbit Linux - General 2 12-11-2005 12:33 PM


All times are GMT -5. The time now is 07:02 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration