-Horriable- Problems with *I think* USB
Right now I am having the worst day with this USB wireless dongle. I am pretty sure that this is it anyhow. I am not to fluent with linux but I know how to do some things so if you could bear with me please :)
output from dmesg: PCI: Found IRQ 5 for device 00:11.0 PCI: Sharing IRQ 5 with 00:07.2 MJPEG[0]: Zoran ZR36067 (rev 2) irq: 5, memory: 0xed001000 MJPEG[0]: subsystem vendor=0x1031 id=0x7efe MJPEG[0]: Initializing i2c bus... MJPEG[0]: Card not supported No known MJPEG cards found. gameport0: Emu10k1 Gameport at 0xe800 size 8 speed 1217 kHz PCI: Found IRQ 3 for device 00:0b.0 usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 5 for device 00:07.2 PCI: Sharing IRQ 5 with 00:11.0 uhci.c: USB UHCI at I/O 0xe000, IRQ 5 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 hub.c: new USB device 00:07.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x2001/0x3700) is not claimed by any active driver. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 prism2usb_init: prism2_usb.o: 0.2.1-pre25 Loaded prism2usb_init: dev_info is: prism2_usb usb.c: registered new driver prism2_usb pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.5 ident: nic h/w: id=0x8026 1.0.0 ident: pri f/w: id=0x15 1.1.3 ident: sta f/w: id=0x1f 1.7.1 MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Prism2 card SN: 000000000000 linkstatus=CONNECTED hfa384x_dorrid: ctlx failure=REQ_FAILED prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-5 hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED NETDEV WATCHDOG: wlan0: transmit timed out wlan0 rx pipe reset complete. wlan0 tx pipe reset complete. hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED NETDEV WATCHDOG: wlan0: transmit timed out hfa384x_drvr_txframe: submit_tx_urb() failed, error=-67 wlan0 rx pipe reset complete. wlan0 tx pipe reset complete. hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_usbin_callback: wlan0 rx pipe stalled: requesting reset hfa384x_usbin_ctlx: Could not match IN URB(0x8001,-75) to CTLX - ignored wlan0 rx pipe reset complete. hfa384x_usbin_callback: wlan0 rx pipe stalled: requesting reset hfa384x_usbin_ctlx: Could not match IN URB(0x8001,-75) to CTLX - ignored wlan0 rx pipe reset complete. hfa384x_usbin_callback: wlan0 rx pipe stalled: requesting reset hfa384x_usbin_ctlx: Could not match IN URB(0x8001,-75) to CTLX - ignored wlan0 rx pipe reset complete. hfa384x_usbin_callback: wlan0 rx pipe stalled: requesting reset hfa384x_usbin_ctlx: Could not match IN URB(0x8001,-75) to CTLX - ignored wlan0 rx pipe reset complete. hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-5 hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED NETDEV WATCHDOG: wlan0: transmit timed out hfa384x_drvr_txframe: submit_tx_urb() failed, error=-67 wlan0 rx pipe reset complete. wlan0 tx pipe reset complete. hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-5 NETDEV WATCHDOG: wlan0: transmit timed out hfa384x_drvr_txframe: submit_tx_urb() failed, error=-67 hfa384x_dorrid: ctlx failure=REQ_FAILED wlan0 rx pipe reset complete. hfa384x_usbin_ctlx: Could not match IN URB(0x8003,0) to CTLX - ignored wlan0 tx pipe reset complete. hfa384x_dorrid: ctlx failure=REQ_FAILED prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-5 hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED NETDEV WATCHDOG: wlan0: transmit timed out hfa384x_drvr_txframe: submit_tx_urb() failed, error=-67 wlan0 rx pipe reset complete. wlan0 tx pipe reset complete. hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED hfa384x_dorrid: ctlx failure=REQ_FAILED But all it will do is freeze the machine and cause the Caps and Scroll lock lights to blink on and off and I cant do anything but reset. |
Yes - it looks like the system attempted unsuccessfully to load a wireless driver. You should at least post
The exact brand/model of wireless device. The kernel version you are running (output of 'uname -r'). The particular linux distro and version. |
You seem to have the Prism 2 card, take a look at this link, that perhaps can give you some direction to troubleshoot the problem: http://www.goonda.org/wireless/prism2/
|
All times are GMT -5. The time now is 09:19 PM. |