LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 03-02-2006, 07:48 PM   #1
Iramason
LQ Newbie
 
Registered: Feb 2006
Posts: 2

Rep: Reputation: 0
Question -Horriable- Problems with *I think* USB


Right now I am having the worst day with this USB wireless dongle. I am pretty sure that this is it anyhow. I am not to fluent with linux but I know how to do some things so if you could bear with me please

output from dmesg:

PCI: Found IRQ 5 for device 00:11.0
PCI: Sharing IRQ 5 with 00:07.2
MJPEG[0]: Zoran ZR36067 (rev 2) irq: 5, memory: 0xed001000
MJPEG[0]: subsystem vendor=0x1031 id=0x7efe
MJPEG[0]: Initializing i2c bus...
MJPEG[0]: Card not supported
No known MJPEG cards found.
gameport0: Emu10k1 Gameport at 0xe800 size 8 speed 1217 kHz
PCI: Found IRQ 3 for device 00:0b.0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 5 for device 00:07.2
PCI: Sharing IRQ 5 with 00:11.0
uhci.c: USB UHCI at I/O 0xe000, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hub.c: new USB device 00:07.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x2001/0x3700) is not claimed by any active driver.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
prism2usb_init: prism2_usb.o: 0.2.1-pre25 Loaded
prism2usb_init: dev_info is: prism2_usb
usb.c: registered new driver prism2_usb
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
ident: nic h/w: id=0x8026 1.0.0
ident: pri f/w: id=0x15 1.1.3
ident: sta f/w: id=0x1f 1.7.1
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 000000000000
linkstatus=CONNECTED
hfa384x_dorrid: ctlx failure=REQ_FAILED
prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-5
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
NETDEV WATCHDOG: wlan0: transmit timed out
wlan0 rx pipe reset complete.
wlan0 tx pipe reset complete.
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
NETDEV WATCHDOG: wlan0: transmit timed out
hfa384x_drvr_txframe: submit_tx_urb() failed, error=-67
wlan0 rx pipe reset complete.
wlan0 tx pipe reset complete.
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_usbin_callback: wlan0 rx pipe stalled: requesting reset
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,-75) to CTLX - ignored
wlan0 rx pipe reset complete.
hfa384x_usbin_callback: wlan0 rx pipe stalled: requesting reset
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,-75) to CTLX - ignored
wlan0 rx pipe reset complete.
hfa384x_usbin_callback: wlan0 rx pipe stalled: requesting reset
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,-75) to CTLX - ignored
wlan0 rx pipe reset complete.
hfa384x_usbin_callback: wlan0 rx pipe stalled: requesting reset
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,-75) to CTLX - ignored
wlan0 rx pipe reset complete.
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_usbin_ctlx: Could not match IN URB(0x8001,0) to CTLX - ignored
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-5
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
NETDEV WATCHDOG: wlan0: transmit timed out
hfa384x_drvr_txframe: submit_tx_urb() failed, error=-67
wlan0 rx pipe reset complete.
wlan0 tx pipe reset complete.
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-5
NETDEV WATCHDOG: wlan0: transmit timed out
hfa384x_drvr_txframe: submit_tx_urb() failed, error=-67
hfa384x_dorrid: ctlx failure=REQ_FAILED
wlan0 rx pipe reset complete.
hfa384x_usbin_ctlx: Could not match IN URB(0x8003,0) to CTLX - ignored
wlan0 tx pipe reset complete.
hfa384x_dorrid: ctlx failure=REQ_FAILED
prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-5
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
NETDEV WATCHDOG: wlan0: transmit timed out
hfa384x_drvr_txframe: submit_tx_urb() failed, error=-67
wlan0 rx pipe reset complete.
wlan0 tx pipe reset complete.
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED
hfa384x_dorrid: ctlx failure=REQ_FAILED

But all it will do is freeze the machine and cause the Caps and Scroll lock lights to blink on and off and I cant do anything but reset.

Last edited by Iramason; 03-02-2006 at 07:51 PM.
 
Old 03-02-2006, 09:03 PM   #2
maroonbaboon
Senior Member
 
Registered: Aug 2003
Location: Sydney
Distribution: debian
Posts: 1,495

Rep: Reputation: 48
Yes - it looks like the system attempted unsuccessfully to load a wireless driver. You should at least post

The exact brand/model of wireless device.
The kernel version you are running (output of 'uname -r').
The particular linux distro and version.
 
Old 03-02-2006, 09:06 PM   #3
ralvez
Member
 
Registered: Oct 2003
Location: Canada
Distribution: ArchLinux && Slackware 10.1
Posts: 298

Rep: Reputation: 30
You seem to have the Prism 2 card, take a look at this link, that perhaps can give you some direction to troubleshoot the problem: http://www.goonda.org/wireless/prism2/
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Any problems with USB-port PCMCIA cards and USB Floppy Drives? DreameR-X Linux - Laptop and Netbook 9 05-14-2005 01:37 PM
USB LexarMedia 32MB Data-Key + KDE 3.2=USB/HD Access problems that_guy Slackware 0 02-03-2005 08:27 AM
USB problems: Memorex USB stick 256MB and PSX to USB adapter by Radio Shack Knuckles T15 Linux - Hardware 1 05-19-2004 06:58 PM
problems installing redhat 9; usb problems (I think) nhelseth Linux - Newbie 2 04-27-2004 04:17 PM
HP Deskjet (USB) & CUPS & Slackware 9.1: Unable to open USB device "usb:/dev/usb/lp0&qu arnostienen Slackware 2 01-29-2004 03:22 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 08:02 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration