setting up dhcp3-server 10.04.4

acid_kewpie · 09-01-2011, 02:24 PM

no, the options should be *correct*. It is really important that you understand what this information is! That's why none of this is working! I can't tell you what addresses they should be, that's for you to know.

{davros} · 09-01-2011, 02:34 PM

i am trying to "understand" , yes by guessing because i don't have much else to go on here. so far i have gotten farther than i thought i would with what little knowledge of servers i have. no guessing is not really the best way to come to the proper answer. sometimes you get lucky sometimes you don't. so far you have been gracious enough to point out my mistakes and i have been trying to understand why and how to fix them. hopefully continuing on.

acid_kewpie · 09-01-2011, 02:36 PM

your server appears to be your gateway, so set the router option to that. I've seen no sign of 192.168.1.1 outside of the config so have to assume it doesn't exist, so remove that from the config.

{davros} · 09-01-2011, 02:50 PM

Quote:

your server appears to be your gateway, so set the router option to that.

not being the ip set by the internet connection. but rather the subnet i set to it 192.168.1.0?

subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.10 192.168.1.200;
option subnet-mask 255.255.255.0;
option domain-name "mine.org";
option routers 192.168.1.0;
option broadcast-address 192.168.1.255;
default-lease-time 600;
max-lease-time 7200;
}

again i am sorry for my lack of understanding this information at this time

and no thats not correect either cuz it didnt work ...