LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (http://www.linuxquestions.org/questions/slackware-14/)
-   -   using sbopkg to build and inst an audio queue fails in lapspa_sdk (http://www.linuxquestions.org/questions/slackware-14/using-sbopkg-to-build-and-inst-an-audio-queue-fails-in-lapspa_sdk-943856/)

nass 05-08-2012 05:09 AM

using sbopkg to build and inst an audio queue fails in lapspa_sdk
 
hello everyone,
I created an audio queue in sbopkg.
the problem is with ladspa_sdk. after building some plugins it requests that I listen to some whitenoise and it halts there

from the sbopkg log file
Quote:

../bin/analyseplugin ../plugins/noise.so

Plugin Name: "White Noise Source"
Plugin Label: "noise_white"
Plugin Unique ID: 1050
Maker: "Richard Furse (LADSPA example plugins)"
Copyright: "None"
Must Run Real-Time: No
Has activate() Function: No
Has deactivate() Function: No
Has run_adding() Function: Yes
Environment: Normal or Hard Real-Time
Ports: "Amplitude" input, control, 0 to ..., default 1, logarithmic
"Output" output, audio

../bin/applyplugin -s 1 \
../snd/noise.wav /tmp/test.wav \
../plugins/filter.so lpf 500 \
../plugins/filter.so lpf 500 \
../plugins/sine.so sine_fcaa 6000 \
../plugins/delay.so delay_5s 1 0.1 \
../plugins/amp.so amp_mono 4 \

Peak output: 27349.5
---------------------------------------------
First listen to the white noise input signal:
---------------------------------------------
sndfile-play ../snd/noise.wav

+++++++++++++++++++++++++++++++++++++++++++
PACKAGE BUILDING/INSTALLATION SUMMARY LOG
Using the SBo repository for Slackware 13.37
Queue Process: Build and install
it stayed at that point the whole night
i pressed enter but nothing changed.
I had to ctrl+c the process..

obviously that is not optimal - there are about 40 more stuff that are waiting in queue

there seem to be no option to avoid listening to the streams while the build - install process is ongoing..

is there a solution?

Thank you for your help


EDIT: I should warn you, this slack machine is a vmguest and the real audio output is done through the virtualbox Intel Audio device...

It seems to identify it properly :
Quote:

nass@starmass:~$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=Intel
HDA Intel, STAC92xx Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, STAC92xx Digital
IEC958 (S/PDIF) Digital Audio Output

nass 05-08-2012 07:20 AM

ok so the problem was simple (once again)

I hadn't initialised the sound on the vm.

alsaconf would usually identify the card and init it , but apparently it fails to do so sometimes.

so
Quote:

alsactl init
should be run by hand.

then sndfile-play works correctly and the build can continue


All times are GMT -5. The time now is 09:07 PM.