X is not loading, How to solve it
Hi all,
Here we go again, I was trying to change mouse from serial to ps2 with SAX, and now the graphical interfase wont start. Where shall I start to solve this? thanx |
What happens when you type startx?
|
Shows this
XFree86 Version 4.0.2 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 18 December 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: SuSE Linux [ELF] SuSE Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 19 11:55:07 2004 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "Layout[all]" (**) |-->Screen "Screen[fbdev]" (0) (**) | |-->Monitor "Monitor[0]" (**) | |-->Device "Device[fbdev]" (**) |-->Input Device "Keyboard[0]" (**) XKB: keycodes: "xfree86" (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "de" (**) XKB: variant: "nodeadkeys" (**) |-->Input Device "Mouse[0]" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/uni/,/usr/X11R6/lib/X11/fonts/misc/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) S3 Trio3D/2X rev 2, Mem @ 0xe0000000/26 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o (II) Module fbdev: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) FBDev: driver for framebuffer: fbdev, afb (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.0.2 (EE) No devices detected. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to feedback@suse.de. XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. |
if you wonder what's in XFree86.0.log
XFree86 Version 4.0.2 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 18 December 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: SuSE Linux [ELF] SuSE Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 19 12:31:36 2004 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "Layout[all]" (**) |-->Screen "Screen[fbdev]" (0) (**) | |-->Monitor "Monitor[0]" (**) | |-->Device "Device[fbdev]" (**) |-->Input Device "Keyboard[0]" (**) Option "Protocol" "Standard" (**) Option "XkbKeycodes" "xfree86" (**) XKB: keycodes: "xfree86" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "de" (**) XKB: layout: "de" (**) Option "XkbVariant" "nodeadkeys" (**) XKB: variant: "nodeadkeys" (**) |-->Input Device "Mouse[0]" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/uni/,/usr/X11R6/lib/X11/fonts/misc/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" (**) Option "BlankTime" "0" (**) Option "Xinerama" "off" (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.3 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00 (II) PCI: 00:09:0: chip 10ec,8029 card 10ec,8029 rev 00 class 02,00,00 hdr 00 (II) PCI: 00:0b:0: chip 1274,5880 card 1274,2003 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:0c:0: chip 10b5,9050 card 12c7,0529 rev 02 class 06,80,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8a13 card 5333,8a13 rev 02 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] (II) Bus 1 prefetchable memory range: (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) S3 Trio3D/2X rev 2, Mem @ 0xe0000000/26 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E (II) Active PCI resource ranges: [0] -1 0xec000000 - 0xec001fff (0x2000) MX[B] [1] -1 0xec002000 - 0xec00207f (0x80) MX[B] [2] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [3] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [4] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B] [5] -1 0x0000e800 - 0x0000e83f (0x40) IX[B] [6] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [7] -1 0x0000e000 - 0x0000e01f (0x20) IX[B] [8] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0xec000000 - 0xec001fff (0x2000) MX[B] [1] -1 0xec002000 - 0xec00207f (0x80) MX[B] [2] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [3] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [4] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B] [5] -1 0x0000e800 - 0x0000e83f (0x40) IX[B] [6] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [7] -1 0x0000e000 - 0x0000e01f (0x20) IX[B] [8] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xec000000 - 0xec001fff (0x2000) MX[B] [6] -1 0xec002000 - 0xec00207f (0x80) MX[B] [7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [8] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [9] -1 0x00000000 - 0x000001ff (0x200) IX[B]E [10] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B] [11] -1 0x0000e800 - 0x0000e83f (0x40) IX[B] [12] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [13] -1 0x0000e000 - 0x0000e01f (0x20) IX[B] [14] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) LoadModule: "fbdev" (II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o (II) Module fbdev: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.1 (II) FBDev: driver for framebuffer: fbdev, afb (II) Primary Device is: PCI 01:00:0 (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.3 (EE) No devices detected. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to feedback@suse.de. |
Has anyone got a clue on where to go from here,? I'm really stocked here.
|
I'm copying this info from elsewheres:
"XFree86 4.x utility called xf86cfg. However, i would recommend that you use # XFree86 -configure this will create a file called /root/XF86Config.new After that try starting X with the following command # XFree86 -xf86config XF86Config.new If everything looks fine copy /root/XF86Config.new to /etc/X11/XF86Config-4 (which is a correct name for X 4.x config file)" Try running a new config to see if that alieviates the problem. If it does, just switch to the new config file. |
All times are GMT -5. The time now is 02:30 PM. |