| ut0ugh1 |
08-18-2014 01:42 PM |
sensors detect applet conf with changed fan setup and ati apu temp
i would like to insert the amdconfig command highligted in red (with the right temp highlighted in light blue - my apu ain't melting down ;) )on the sensors applet on the bottom bar on my screen. is it possibile
Code:
DISPLAY=:0 sudo amdconfig --odgt --odgc && sensors nct6776-isa-0290 && hddtemp /dev/sda
[sudo] password for hp:
Default Adapter - AMD Radeon HD 7560D
Sensor 0: Temperature - 4294960.50 C
Default Adapter - AMD Radeon HD 7560D
Core (MHz) Memory (MHz)
Current Clocks : 304 800
Current Peak : 760 800
Configurable Peak Range : [304-760] [800-800]
GPU load : 0%
nct6776-isa-0290
Adapter: ISA adapter
Vcore: +0.94 V (min = +0.00 V, max = +1.74 V)
in1: +1.88 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.38 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.38 V (min = +2.98 V, max = +3.63 V)
in4: +2.04 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +1.69 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +2.04 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.44 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.34 V (min = +2.70 V, max = +3.63 V)
fan1: 1151 RPM (min = 0 RPM)
fan2: 1508 RPM (min = 0 RPM)
fan3: 1189 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +30.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
CPUTIN: +29.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN: -62.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
/dev/sda: ST1500DL003-9VT16L: 30°C
second question
on a previous setup of the applet i installed fan2 (that is a aio liquid cooling sys) as fan2 and then i moved it to cpufan which is fan1 but even after a new step of sensors-detect. the detection had no changes. thx. |
