LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 08-18-2014, 01:42 PM   #1
ut0ugh1
Member
 
Registered: Oct 2011
Posts: 59

Rep: Reputation: Disabled
sensors detect applet conf with changed fan setup and ati apu temp


i would like to insert the amdconfig command highligted in red (with the right temp highlighted in light blue - my apu ain't melting down )on the sensors applet on the bottom bar on my screen. is it possibile
Code:
 DISPLAY=:0 sudo amdconfig --odgt --odgc && sensors nct6776-isa-0290 && hddtemp /dev/sda
[sudo] password for hp: 

Default Adapter - AMD Radeon HD 7560D
                  Sensor 0: Temperature - 4294960.50 C

Default Adapter - AMD Radeon HD 7560D
                            Core (MHz)    Memory (MHz)
           Current Clocks :    304           800
             Current Peak :    760           800
  Configurable Peak Range : [304-760]     [800-800]
                 GPU load :    0%
nct6776-isa-0290
Adapter: ISA adapter
Vcore:          +0.94 V  (min =  +0.00 V, max =  +1.74 V)
in1:            +1.88 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:           +3.38 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:          +3.38 V  (min =  +2.98 V, max =  +3.63 V)
in4:            +2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:            +1.69 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:            +2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:           +3.44 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:           +3.34 V  (min =  +2.70 V, max =  +3.63 V)
fan1:          1151 RPM  (min =    0 RPM)
fan2:          1508 RPM  (min =    0 RPM)
fan3:          1189 RPM  (min =    0 RPM)
fan4:             0 RPM  (min =    0 RPM)
fan5:             0 RPM  (min =    0 RPM)
SYSTIN:         +30.0C  (high =  +0.0C, hyst =  +0.0C)  ALARM  sensor = thermistor
CPUTIN:         +29.5C  (high = +80.0C, hyst = +75.0C)  sensor = thermistor
AUXTIN:         -62.5C  (high = +80.0C, hyst = +75.0C)  sensor = thermistor
PCH_CHIP_TEMP:   +0.0C  
PCH_CPU_TEMP:    +0.0C  
PCH_MCH_TEMP:    +0.0C  
intrusion0:    ALARM
intrusion1:    ALARM
beep_enable:   disabled

/dev/sda: ST1500DL003-9VT16L: 30C
second question
on a previous setup of the applet i installed fan2 (that is a aio liquid cooling sys) as fan2 and then i moved it to cpufan which is fan1 but even after a new step of sensors-detect. the detection had no changes. thx.

Last edited by ut0ugh1; 08-19-2014 at 03:00 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
netbook's fan doesn't turn down once it's going/ coretemp/ sensors.conf etc tpprynn Linux - Laptop and Netbook 1 11-10-2013 07:25 AM
Hardware Monitor Applet showing incorrect temp and fan speed IMNOboist Linux - Desktop 1 02-04-2011 08:04 AM
Trying to setup lm sensors for fan control on Debian janprunk Linux - Hardware 2 03-24-2010 01:24 AM
ACPI or lm-sensors fan control on Sony Vaio (fan runs at full speed) roanm Linux - Hardware 7 11-14-2009 07:37 PM
GNOME Sensors Applet says NO SENSORS FOUND! badgerbox76 Linux - Newbie 2 12-24-2005 11:58 AM


All times are GMT -5. The time now is 04:01 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration