LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Networking (https://www.linuxquestions.org/questions/linux-networking-3/)
-   -   Cant connect using DSL with Mandriva 2006 (https://www.linuxquestions.org/questions/linux-networking-3/cant-connect-using-dsl-with-mandriva-2006-a-366104/)

javiersf 09-22-2005 08:58 PM

Cant connect using DSL with Mandriva 2006
 
Hola...I just installed Mandriva 2006 RC2 and have been unable to log to the internet using my DSL conection.

I just follow the wizard of the Mandriva Configuration Center, but my dsl modem doesnt blink the leds.

I am using the same PPPoE configuration that i used with my windows xp os, however it simply doesnt connect it. I dont received a message about what could be wrong, simply a not connected message. I have removed and reinstalled the connection several times but with no results.

My ISP doesnt provide support for linux, but i know you guys can help me as you have done so before.

Thankyou

javier
mexico

MasterC 09-22-2005 09:06 PM

Hey there Javier Mexico!

How is your DSL modem connected to your Linux box? Does it go through a router, does it connect directly via the USB port, does it connect directly using an Ethernet cable? Is your DSL modem also a router?

Cool

Tinkster 09-22-2005 09:57 PM

Re: Cant connect using DSL with Mandriva 2006
 
Quote:

Originally posted by javiersf
Hola...I just installed Mandriva 2006 RC2 and have been unable to log to the internet using my DSL conection.

I just follow the wizard of the Mandriva Configuration Center, but my dsl modem doesnt blink the leds.


Help us with helping you - tell us what type of modem
it is, how it's connected to the computer, ...



Cheers,
Tink

jtshaw 09-23-2005 08:35 AM

I'm going to go ahead and move this into Linux - Networking... I *think* that is the best place to get good responses for you.

javiersf 09-23-2005 06:30 PM

Hi, my dsl modem is a Efficient Networks SpeedStream, it is not a router, it is conected to my dell computer using a Cnet pro200wl PCI Fast Ethernet card. When I configured for the first time the adsl conection manually (my country is not shown in the wizard), the modem leds start blinking, like the modem is trying to connect to my isp. But after a minute i just stay with a message saying: Not connected.

In fact, I have been unable to find where to configure again the username and password.

thank you for your help, do i miss something that i should include?

javier
mexico

javiersf 09-24-2005 02:51 PM

Hi, I forgot to tell you that my adsl modem is a speadstream 5200 not configured as a router.

I thought that with this kind of configuration (dsl with ethernet), my linux connection would be painless.

javier
mexico

javiersf 09-25-2005 02:31 PM

Hi, this is the result of the ifconfig -a after I received a connection
failed message, although i dont know why i am getting pp1 and pp2 logs since
my dsl profile its suppose to be pp0. I tried to do an ifconfig -a during
the connection but i didnt receive anything. Below is my windows xp info.

eth0 Link encap:Ethernet HWaddr 00:08:A1:21:E4:B9
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:5238 (5.1 KiB)
Interrupt:16 Base address:0xec00

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:133 errors:0 dropped:0 overruns:0 frame:0
TX packets:133 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:13628 (13.3 KiB) TX bytes:13628 (13.3 KiB)

ppp0 Link encap:Point-to-Point Protocol
POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

ppp1 Link encap:Point-to-Point Protocol
POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

ppp2 Link encap:Point-to-Point Protocol
POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

windows xp ipconfig/all

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.


C:\Documents and Settings>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : javier
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : CNet PRO200WL PCI Fast Ethernet
Adap
ter
Physical Address. . . . . . . . . : 00-08-A1-21-E4-B9
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.40.165
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

PPP adapter ATT ADSL:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 201.151.48.204
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 201.151.48.204
DNS Servers . . . . . . . . . . . : 207.248.224.71
207.248.224.72
NetBIOS over Tcpip. . . . . . . . : Disabled

thankyou for your help

javier

Alessandro 10-18-2005 05:50 PM

See my mini HOWTO in the Mandriva section of this forum.


All times are GMT -5. The time now is 02:23 PM.