LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Networking (https://www.linuxquestions.org/questions/linux-networking-3/)
-   -   ADSL Mandrake 9.1 (https://www.linuxquestions.org/questions/linux-networking-3/adsl-mandrake-9-1-a-80739/)

LinuxNewby 08-10-2003 05:23 PM

ADSL Mandrake 9.1
 
Alright, I am completly new to Linux (running Mandrake 9.1 at the moment) and everything is running smoothly. Except for a DSL connection I have.

1)ISP is SBC Yahoo DSL
2)NIC is Realtek 8139/810X
3)Using a DSL modem. Not a router
4)Distribution is Mandrake 9.1

Thanks in advance

Half_Elf 08-10-2003 06:59 PM

get rp-pppoe
I don't (never) remember the adress, but it's like "roamingpenguins.com"... search google.

Also search forum, a lot of thread about PPPoE.

oh and... is your network card up and running?

LinuxNewby 08-10-2003 07:13 PM

My network card is recognized.

JasonSmead 08-11-2003 04:11 AM

do not use the mandrake network configuration... it is usually broken. that being said, do this:

set up nic:

ifconfig eth0 192.168.1.1

set up adsl:

adsl-setup

fill in the information

adsl-start

voila!

do: ping www.google.com

just to make sure you are connected.

ray66 08-11-2003 06:43 AM

bell sympatico hight speed
 
ok so here I am , first time user of linux mandrake 9.1 ,,honestly I love it ..only one damn problemme Icant configure my internet connexion..please help or I will jump from my desk...

Half_Elf 08-11-2003 10:09 AM

Quote:

set up adsl: adsl-setup fill in the information adsl-start
Maybe you should mention he has to INSTALL A PPPoE PROG before?

LinuxNewby 08-11-2003 10:45 AM

If someone could explain how to install a PPPoe program, that would be greatly appreciated...

ray66 08-11-2003 11:10 AM

the pppoe programme does't install by it self at the first configuration ?

when i start the mandrake network configuration ..it tell me that it recognize 2 ethernet card on my machine

i try whit both ...and still can't get connect ...


anybody ? it's the second time this morning that i jump from my desk ...i know it's not that hight ...but a'm a midget..and it hurt ...

ray66 08-11-2003 11:45 AM

if it can help ..i'm using a cable card for my internet ..?

Half_Elf 08-11-2003 11:28 PM

Quote:

If someone could explain how to install a PPPoe program, that would be greatly appreciated...
first download it (I told you were to search before. The progs I know is called "rp-pppoe"

second, uncompress it (tar -xzf rpppoe_or_whatever.tar.gz)
third, read README and INSTALL files that come with it. Instruction are in it.

LinuxNewby 08-11-2003 11:47 PM

Thanks alot Half-Elf!

ray66 08-12-2003 06:15 AM

ok so what about this ..!

I did a manual instalation ..whit adsl-setup , I follow the instruction , then i do a adsl-start ..boumm it tell me i'm connect ...i do a adsl-status .everithing seems to be fine , i opened a browser ..try a link ..I get the message that the addrees is not recognize ...whatever adress i put ...it doesn't recognize it ?

my internet suplier even if they don't offer support for linux ..told me I should download winport ? annybody know what they talk about ? or maybe someone can help me ? please I am really desperratte ..I really whant to give linux a try ...but after over almost a week now ..i'm about to give up and go back to microsoft ...and belleive me ..I whish not to go back there ...please help the poor guy ..

my vertion of linux is mandrake 9.1...

Half_Elf 08-12-2003 07:29 AM

ray66: type "ifconfig" and "route -n" at root and give us the output (do it while you are suppose to be connected).

Also, copy us what is in the file /etc/resolv.conf

ray66 08-12-2003 07:35 AM

I'll try this tonight when a get home ..and i'll post you the result tommorow morning ...thanks for the help ;o)

ray66 08-13-2003 08:46 AM

ok here are the result .....for ifconfig

ifconfig
eth0 lien encap:ethernet hwaddr 00:E0:29:76:6E:15
inet adr:10.0.010 bcast:10.0.0.255
masque:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14 errors:0 dropped:0 overrun:0 frame:0
tx packets:1412 errors:0 dropped:0 overruns:0 carriers:0
collisions:0 lg file transmission:100
RX bytes:886 (886.0 b) TX bytes:235848 (230.3 kb)
interruption:5 adress de base:0xe400

eth1 lien encap:ethernet hwaddr 00:0A:E6:1C:38:79
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets :0errors:0 dropped:0 overruns:0 frames:0
TX Packets:1412 errors:0 dropped:0 overruns:0 carriers:0
collisions:0 lg file transmission:100
RX byte:0 (0.0 b) TX bytes:242124 (236.4 kb)
Interruption:5 adress de base :0xd000

eth1:9 lien encap:ethernet hwaddr 00:0A:E6:1C:38:79
inet adr:169.254.89.152 Bcast169.254.255.255
masque:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 metric:1
interruption:5 adresse de base:0xd000

lo lien encap:boucle locale ( I guess it whould translate as local loop?)
inet adr:127.0.0.1 masque:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
rx packets:194 errors:0 dropped:0 overruns:0 frame:0
tx packets:194 errors:0 dropped:0 overruns:0 carriers:0
collision:0 lg file transmission:0
RX bytes:21166 (20.6 kb) TX BYTES:21166 (20.6KB)
PPP0 LIEN ENCAP:PROTTOCOLE POINT TO POINT
inet adr:65.92.235.54 p-t-p:65.92.235.1
masque:255.255.255
UP POINTOPOINT RUNNING NOARP. MULTICAST MTU:1492
Metric:1

RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped;0 overruns:0 carriers:0
collision:0 lg file transmission:3
RX byte:160 (160.0b) TX bytes:216. (216.0B)


All times are GMT -5. The time now is 01:59 AM.