USB not working ! AMD64/Ubuntu/ATI
Hello,
I am using Ubuntu hoary 5.04 on amd64 3500+ and i upgraded the kernel from 2.6.10-5 to 2.611-1 in order to enable dma to my ide disks. I took the upgrade out of the ubuntu repos. The chipset is ati xpress200P richard@ubuntu:$ lspci 0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5951 0000:00:02.0 PCI bridge: ATI Technologies Inc: Unknown device 5a34 0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374 0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375 0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373 0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 10) 0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376 0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377 0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown device 4370 (rev 01) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5e4b 0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5e6b 0000:02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)0000:02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) richard@ubuntu:$ I am trying to figure out if something is wrong with my usb ports. My usb printer does not operate (cups or lpr). My usb wifi lan adapters (netgear WG111T and Yakumo QuickLAN) do not work either. On my old PC K6/450 running FC3 all of those peripherals operate normally. They are detected : richard@ubuntu:~$ lsusb Bus 003 Device 004: ID 1385:4251 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 04b8:0005 Seiko Epson Corp. Stylus Printer Bus 001 Device 001: ID 0000:0000 richard@ubuntu:~$ If I unplug the wifi lan adapter an reconnect it in the next slot I have this in dmesg : . . usb 3-3: USB disconnect, address 3 usb 3-4: new high speed USB device using ehci_hcd and address 4 richard@ubuntu:~$ So it does look ok. The trouble is that normaly plugging the lan adapter should fire the 'usbnet' device driver (as it does on the old pc with FC3) but here nothing happens. The 'usbnet' driver is not loaded. richard@ubuntu:~$ lsmod | grep usb usblp 13952 0 richard@ubuntu:~$ If I start the 'usbnet' module manually it does start but does not connect to the device. There is a link that i am missing (or that is actually missing) Has anybody a hint ? Richard |
All times are GMT -5. The time now is 01:39 AM. |