SuSE 9.1 Pro & USR5610B Modem
I am new to Linux and hve loaded. SUSE 9.1 Pro. I have a USR5610B. I have read the HOW-TO-MODEM and searched the thread for answers about getting SUSE to recognized my modem.
Iam running a dual boot system withh Windows XP. The modem is recognized under XP. When the system boots under SUSE, it recognizes the modem and displays the following info ttyS0 3f8 4 ttyS1 2f8 3 ttyS14 0xd000 5 uart 6550 I enter the command ln - s /dev/ttyS14 /dev/modem, b ut it still does not work and configured the dialup connection but get no response from the modem I have extracted the following information from various commands Any help would be greatly appreciated. Thanks in advanced Dickbeamish I have extracted the following information from various commands Kinternet log SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Status is: connecting pppd[0]: Plugin passwordfd.so loaded. pppd[0]: --> WvDial: Internet dialer version 1.54.0 pppd[0]: --> Initializing modem. pppd[0]: --> Sending: ATZ pppd[0]: --> Sending: ATQ0 pppd[0]: --> Re-Sending: ATZ pppd[0]: --> Modem not responding. pppd[0]: Connect script failed lspci -vv 0000:00:0a.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 0 1) (prog-if 02 [16550]) Subsystem: 5610 56K FaxModem: Unknown device 00d3 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d000 Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot +,D3cold+) lspci -v 0000:00:0a.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 01) (prog-if 02 [1655 0]) Subsystem: 5610 56K FaxModem: Unknown device 00d3 Flags: medium devsel, IRQ 5 I/O ports at d000 Capabilities: [dc] Power Management version inux:/ # cd /proc linux:/proc # cat ioports 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : seria0cf8-0cff : PCI conf1 c000-cfff : PCI Bus #01 c000-c0ff : 0000:01:00.0 d000-d007 : 0000:00:0a.0 d000-d007 : serial d400-d4ff : 0000:00:0d.0 d800-d81f : 0000:00:10.0 d800-d81f : uhci_hcd dc00-dc1f : 0000:00:10.1 dc00-dc1f : uhci_hcd e000-e01f : 0000:00:10.2 e000-e01f : uhci_hcd e400-e40f : 0000:00:11.1 e400-e407 : ide0 e408-e40f : ide1 e800-e8ff : 0000:00:11.5 e800-e8ff : VIA8233 ec00-ecff : 0000:00:12.0 ec00-ecff : via-rhincat interrupts linux:/proc # cat interrupts CPU0 0: 812464 XT-PIC timer 1: 721 XT-PIC i8042 2: 0 XT-PIC cascade 5: 100000 XT-PIC uhci_hcd 8: 2 XT-PIC rtc 9: 0 XT-PIC acpi 10: 0 XT-PIC uhci_hcd, VIA8233 11: 20 XT-PIC aic7xxx, uhci_hcd, ehci_hcd, eth0 12: 51044 XT-PIC i8042 14: 13437 XT-PIC ide0 15: 12215 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: linux:/proc # cd /dev linux:/dev # ls -l modem lrwxrwxrwx 1 root root 11 2004-11-14 05:57 modem -> /dev/ttyS1inux:/dev # cd / linux:/ # lsmod Module Size Used by nls_iso8859_1 4224 0 nls_cp437 5888 0 vfat 14080 0 fat 43328 1 vfat ppp_generic 28692 0 slhc 7424 1 ppp_generic usbserial 28912 0 parport_pc 35264 1 lp 10916 0 parport 37704 2 parport_pc,lp edd 9240 0 joydev 10176 0 st 38940 0 sr_mod 15652 0 ide_cd 36484 0 cdrom 36508 2 sr_mod,ide_cd nvram 8328 0 snd_seq_oss 30976 0 snd_seq_midi_event 7680 1 snd_seq_oss snd_seq 54672 5 snd_seq_oss,snd_seq_midi_event ipv6 244100 13 snd_pcm_oss 56868 0 speedstep_lib 3712 0 snd_mixer_oss 18688 1 snd_pcm_oss freq_table 4612 0 thermal 12424 0 processor 16040 1 thermal fan 3972 0 button 6032 0 battery 8580 0 ac 4868 0 snd_via82xx 24224 6 snd_pcm 96776 4 snd_pcm_oss,snd_via82xx snd_timer 25476 2 snd_seq,snd_pcm snd_ac97_codec 60676 1 snd_via82xsnd_page_alloc 11012 2 snd_via82xx,snd_pcm gameport 4736 1 snd_via82xx snd_mpu401_uart 7808 1 snd_via82xx snd_rawmidi 24992 1 snd_mpu401_uart snd_seq_device 8328 3 snd_seq_oss,snd_seq,snd_rawmidi snd 59524 23 snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_a c97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 8800 1 snd via_rhine 19720 0 mii 5248 1 via_rhine ehci_hcd 27140 0 via_ircc 20240 0 irda 120124 1 via_ircc uhci_hcd 29584 0 usbcore 96988 5 usbserial,ehci_hcd,uhci_hcd via_agp 7424 1 agpgart 28712 1 via_agp evdev 9600 0 subfs 7296 3 nls_utf8 2176 1 ntfs 86092 1 dm_mod 50044 0 reiserfs 233808 1 aic7xxx 177716 0 sd_mod 19840 0 scsi_mod 107980 4 st,sr_mod,aic7xxx,sd_mod linux:/ # |
This link: http://www.usr.com/support/product-t...asp?prod=5610b has a RedHat RPM listed, not sure if this package will help you but if SuSE has the rpm program installed you should be able to extract it with rpm -i --force and see if anything in this package will help you install the modem. It sounds like this might be a software modem, if that is the case then you may also find help at http://linmodems.org/
hope this helps |
All times are GMT -5. The time now is 09:45 PM. |