LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 11-14-2004, 05:57 AM   #1
rbeamish1
LQ Newbie
 
Registered: Nov 2004
Location: Rockville MD
Posts: 1

Rep: Reputation: 0
SuSE 9.1 Pro & USR5610B Modem


I am new to Linux and hve loaded. SUSE 9.1 Pro. I have a USR5610B. I have read the HOW-TO-MODEM and searched the thread for answers about getting SUSE to recognized my modem.

Iam running a dual boot system withh Windows XP. The modem is recognized under XP.

When the system boots under SUSE, it recognizes the modem and displays the following info
ttyS0 3f8 4
ttyS1 2f8 3
ttyS14 0xd000 5 uart 6550

I enter the command ln - s /dev/ttyS14 /dev/modem, b ut it still does not work and configured the dialup connection but get no response from the modem


I have extracted the following information from various commands


Any help would be greatly appreciated.

Thanks in advanced

Dickbeamish

I have extracted the following information from various commands

Kinternet log

SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: --> Sending: ATQ0
pppd[0]: --> Re-Sending: ATZ
pppd[0]: --> Modem not responding.
pppd[0]: Connect script failed


lspci -vv
0000:00:0a.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 0
1) (prog-if 02 [16550])
Subsystem: 5610 56K FaxModem: Unknown device 00d3
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d000
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot
+,D3cold+)


lspci -v

0000:00:0a.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 01) (prog-if 02 [1655
0])
Subsystem: 5610 56K FaxModem: Unknown device 00d3
Flags: medium devsel, IRQ 5
I/O ports at d000
Capabilities: [dc] Power Management version inux:/ # cd /proc

linux:/proc # cat ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : seria0cf8-0cff : PCI conf1
c000-cfff : PCI Bus #01
c000-c0ff : 0000:01:00.0
d000-d007 : 0000:00:0a.0
d000-d007 : serial
d400-d4ff : 0000:00:0d.0
d800-d81f : 0000:00:10.0
d800-d81f : uhci_hcd
dc00-dc1f : 0000:00:10.1
dc00-dc1f : uhci_hcd
e000-e01f : 0000:00:10.2
e000-e01f : uhci_hcd
e400-e40f : 0000:00:11.1
e400-e407 : ide0
e408-e40f : ide1
e800-e8ff : 0000:00:11.5
e800-e8ff : VIA8233
ec00-ecff : 0000:00:12.0
ec00-ecff : via-rhincat interrupts

linux:/proc # cat interrupts
CPU0
0: 812464 XT-PIC timer
1: 721 XT-PIC i8042
2: 0 XT-PIC cascade
5: 100000 XT-PIC uhci_hcd
8: 2 XT-PIC rtc
9: 0 XT-PIC acpi
10: 0 XT-PIC uhci_hcd, VIA8233
11: 20 XT-PIC aic7xxx, uhci_hcd, ehci_hcd, eth0
12: 51044 XT-PIC i8042
14: 13437 XT-PIC ide0
15: 12215 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0

MIS: linux:/proc # cd /dev
linux:/dev # ls -l modem
lrwxrwxrwx 1 root root 11 2004-11-14 05:57 modem -> /dev/ttyS1inux:/dev # cd /

linux:/ # lsmod
Module Size Used by
nls_iso8859_1 4224 0
nls_cp437 5888 0
vfat 14080 0
fat 43328 1 vfat
ppp_generic 28692 0
slhc 7424 1 ppp_generic
usbserial 28912 0
parport_pc 35264 1
lp 10916 0
parport 37704 2 parport_pc,lp
edd 9240 0
joydev 10176 0
st 38940 0
sr_mod 15652 0
ide_cd 36484 0
cdrom 36508 2 sr_mod,ide_cd
nvram 8328 0
snd_seq_oss 30976 0
snd_seq_midi_event 7680 1 snd_seq_oss
snd_seq 54672 5 snd_seq_oss,snd_seq_midi_event
ipv6 244100 13
snd_pcm_oss 56868 0
speedstep_lib 3712 0
snd_mixer_oss 18688 1 snd_pcm_oss
freq_table 4612 0
thermal 12424 0
processor 16040 1 thermal
fan 3972 0
button 6032 0
battery 8580 0
ac 4868 0
snd_via82xx 24224 6
snd_pcm 96776 4 snd_pcm_oss,snd_via82xx
snd_timer 25476 2 snd_seq,snd_pcm
snd_ac97_codec 60676 1 snd_via82xsnd_page_alloc 11012 2 snd_via82xx,snd_pcm
gameport 4736 1 snd_via82xx
snd_mpu401_uart 7808 1 snd_via82xx
snd_rawmidi 24992 1 snd_mpu401_uart
snd_seq_device 8328 3 snd_seq_oss,snd_seq,snd_rawmidi
snd 59524 23 snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_a c97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 8800 1 snd
via_rhine 19720 0
mii 5248 1 via_rhine
ehci_hcd 27140 0
via_ircc 20240 0
irda 120124 1 via_ircc
uhci_hcd 29584 0
usbcore 96988 5 usbserial,ehci_hcd,uhci_hcd
via_agp 7424 1
agpgart 28712 1 via_agp
evdev 9600 0
subfs 7296 3
nls_utf8 2176 1
ntfs 86092 1
dm_mod 50044 0
reiserfs 233808 1
aic7xxx 177716 0
sd_mod 19840 0
scsi_mod 107980 4 st,sr_mod,aic7xxx,sd_mod
linux:/ #
 
Old 11-14-2004, 08:13 AM   #2
Darin
Senior Member
 
Registered: Jan 2003
Location: Portland, OR USA
Distribution: Slackware, SLAX, Gentoo, RH/Fedora
Posts: 1,024

Rep: Reputation: 45
This link: http://www.usr.com/support/product-t...asp?prod=5610b has a RedHat RPM listed, not sure if this package will help you but if SuSE has the rpm program installed you should be able to extract it with rpm -i --force and see if anything in this package will help you install the modem. It sounds like this might be a software modem, if that is the case then you may also find help at http://linmodems.org/

hope this helps
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
DISCUSSION: USR5610B Internal 56k Modem How-To for Linux DaneM LinuxAnswers Discussion 3 12-10-2007 10:53 AM
SuSE 9.2 Pro & Intel 536ep modem DavidAndrews Linux - Hardware 0 06-29-2005 02:56 AM
USR5610B (USR Performance Pro Modem) HOW-TO! DaneM Linux - Hardware 0 10-07-2004 04:52 AM
USR5610b modem and permissions rascellian Mandriva 1 08-24-2004 10:45 PM
USR5610b and SUSE 9.0 Pro AutisticWunderr Linux - Hardware 0 02-17-2004 04:20 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 08:31 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration