| KlutZ |
06-03-2004 05:50 PM |
Suse 9.1 and USR 5610B Problems
I just got a copy of Suse 9.1 and installed it. Everything works fine except I can't get on the internet. I have a USR 5610B modem, and it works fine in Mandrake 9.1, and windows, I'm using it now. Suse recognizes it for what it is and will even dial up, but won't get on line. Here's the log file for Kinternet:
Quote:
SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: OK
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDT8893089
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDT8893089
pppd[0]: CONNECT 26400/ARQ/V34/LAPM/V42BIS
pppd[0]: --> Carrier detected. Waiting for prompt.
pppd[0]: ** Ascend TNT Terminal Server **
pppd[0]: 1. type PPP
pppd[0]: Enter Selection (1-1,q):
pppd[0]: --> Found a good menu option: "1".
pppd[0]: --> Hmm... a prompt. Sending "1".
pppd[0]: 1
pppd[0]: Requested Service Not Authorized
pppd[0]: ** Ascend TNT Terminal Server **
pppd[0]: 1. type PPP
pppd[0]: Enter Selection (1-1,q):
pppd[0]: --> Found a good menu option: "1".
pppd[0]: --> Hmm... a prompt. Sending "1".
pppd[0]: 1
pppd[0]: Requested Service Not Authorized
pppd[0]: ** Ascend TNT Terminal Server **
pppd[0]: 1. type PPP
pppd[0]: Enter Selection (1-1,q):
pppd[0]: --> Found a good menu option: "1".
pppd[0]: --> Hmm... a prompt. Sending "1".
pppd[0]: 1
pppd[0]: Requested Service Not Authorized
pppd[0]: ** Ascend TNT Terminal Server **
pppd[0]: 1. type PPP
pppd[0]: Enter Selection (1-1,q):
pppd[0]: --> Found a good menu option: "1".
pppd[0]: --> Hmm... a prompt. Sending "1".
pppd[0]: 1
pppd[0]: Requested Service Not Authorized
pppd[0]: ** Ascend TNT Terminal Server **
pppd[0]: 1. type PPP
pppd[0]: Enter Selection (1-1,q):
pppd[0]: --> Found a good menu option: "1".
pppd[0]: --> Hmm... a prompt. Sending "1".
pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best.
pppd[0]: Serial connection established.
pppd[0]: Using interface ppp0
Status is: connecting
pppd[0]: Connect: ppp0 <--> /dev/ttyS14
pppd[0]: LCP: timeout sending Config-Requests
pppd[0]: Connection terminated.
pppd[0]: Receive serial link is not 8-bit clean:
pppd[0]: Problem: all had bit 7 set to 0
pppd[0]: Hangup (SIGHUP)
Status is: disconnected
pppd[0] died: PPP negotiation failed (exit code 10)
|
Can anyone help me figure this out?
BTW, if it helps any, I've noticed that in the boot sequence that ppp0 is set to manual. If that is a problem, then how do I change it? |
