SoundCard loaded and showing, sound however still does not work
I am using a xps laptop, dual boot xubuntu and windows
Windows has recently failed me and its not letting me boot windows, so I wanna listen to music using linux.. or atleast videos or have sound. Now my soundcard was not working before and after windows stopped working, so that is a independent event. I did look at the post, what to post when posting, however the commands did not work so, please help me :D Just let me know what you need and Ill answer any questions you have so that I can get some sound!!! Thank!! |
Hello,
What is version of Xubuntu are you using? And what is you notebook? Please post the output of this command: Code:
lspci -v |
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
Subsystem: Dell Device 02fe Flags: fast devsel Capabilities: <access denied> 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: cfe00000-cfefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) Flags: fast devsel Capabilities: <access denied> 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) Flags: fast devsel Capabilities: <access denied> 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) Flags: fast devsel Capabilities: <access denied> 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) Flags: fast devsel 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) Flags: fast devsel 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) Flags: fast devsel 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20) Subsystem: Dell Device 02fe Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f1005800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Dell Device 02fe Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at f1000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0800000-f08fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=06, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f0900000-f09fffff Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: f0a00000-f0afffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: f0b00000-f0cfffff Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Memory behind bridge: f0d00000-f0dfffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20) Subsystem: Dell Device 02fe Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f1005c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Dell Device 02fe Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) (prog-if 01) Subsystem: Dell Device 02fe Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 35 I/O ports at 1830 [size=8] I/O ports at 1824 [size=4] I/O ports at 1828 [size=8] I/O ports at 1820 [size=4] I/O ports at 1800 [size=32] Memory at f1005000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Dell Device 02fe Flags: medium devsel, IRQ 10 Memory at f1006000 (64-bit, non-prefetchable) [size=256] I/O ports at 1840 [size=32] Kernel modules: i2c-i801 02:00.0 VGA compatible controller: ATI Technologies Inc Device 9488 Subsystem: Dell Device 02fe Flags: bus master, fast devsel, latency 0, IRQ 38 Memory at d0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at cfef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at cfe00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon 02:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series] Subsystem: Dell Device 02fe Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at cfeec000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 05:00.0 Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection Subsystem: Intel Corporation Device 1121 Flags: bus master, fast devsel, latency 0, IRQ 36 Memory at f0900000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn Kernel modules: iwlagn 09:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 01) Subsystem: Dell Device 02fe Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f0b00000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 09:00.1 System peripheral: Ricoh Co Ltd Device e230 (rev 01) Subsystem: Dell Device 02fe Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f0c00800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 09:00.2 System peripheral: Ricoh Co Ltd Device e852 (rev 01) Subsystem: Dell Device 02fe Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f0c00c00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 09:00.3 FireWire (IEEE 1394): Ricoh Co Ltd Device e832 (rev 01) (prog-if 10) Subsystem: Dell Device 02fe Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f0c00000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394 0b:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) Subsystem: Dell Device 02fe Flags: bus master, fast devsel, latency 0, IRQ 37 Memory at f0d00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Subsystem: Intel Corporation Device 8086 Flags: bus master, fast devsel, latency 0 |
Hello,
Quote:
What is version of Xubuntu are you using? And what is you notebook? Please post the output of these command: Code:
$ aplay -l Code:
$ pulseaudio -v --log-target=stderr |
Quote:
aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 $ pulseaudio -v --log-target=stderr I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted I: core-util.c: Failed to acquire high-priority scheduling: No such file or directory I: main.c: This is PulseAudio 0.9.19 I: main.c: Page size is 4096 bytes I: main.c: Machine ID is 0a4912171bc9f45ad27142564b7eb3aa. I: main.c: Session ID is 0a4912171bc9f45ad27142564b7eb3aa-1270062913.469051-1931781900. I: main.c: Using runtime directory /home/kweihs1/.pulse/0a4912171bc9f45ad27142564b7eb3aa-runtime. I: main.c: Using state directory /home/kweihs1/.pulse. I: main.c: Using modules directory /usr/lib/pulse-0.9.19/modules. I: main.c: Running in system mode: no E: pid.c: Daemon already running. E: main.c: pa_pid_file_create() failed. |
Quote:
studio xps umm found this?? Ubuntu Release 9.10(karmic) Kernal Linux 2.6.31-20-generic GNOME 2.28.1 |
Turn off pulseaudio and artsd. Also set the sound server to ALSA which is a lot better than those and it is the main one.
Install Mplayer and type in the following command in terminal. mplayer -v -identify -ao alsa,oss file Pick any media file for in place of file. Use the following command to adjust your sound card while the file is playing back. alsamixer -V all Keep adjusting until you get the sound. If you tried all settings and you still do not get sound, try using headphones. If you tried using headphones, it could the hardware is trashed. |
Quote:
i dont know the command lines for all this |
Quote:
The program 'mplayer' is currently not installed. You can install it by typing: sudo apt-get install mplayer-nogui mplayer: command not found kweihs1@kyle-laptop:~$ |
I said to install mplayer, but you got a hint how to install it. It should have been straight forward from there on how to install it. Also when you ran it, you copy letter by letter. I stated clearly to place in any media file for file.
Your distribution has documentation how to do tasks like disable services. Read the documentation to help you to turn off services like PulseAudio and ARTSD. I am not going to help you any further because Linux is a DIY operating system. There is documentation on Linux and how to do several tasks in it. If you do not use them and ask for me to do all the work for you, you will not learn anything. At this time you are acting dumb just to get help. |
Quote:
Ya i coped it letter for letter, i thought u were helping me, not calling me dumb and not helping at all. If i wanted that id go elsewhere, im pretty sure this is a linux question blog.. therefore i thought I would get help... \ My distribution? How would u know how i got it?? huh?? you dont.. exactly, i had it installed, so i never did it myself.. Ok again, im not acting dumb, i just dont know it!! and i dont want to learn!! like many computer users of today... I just want it fixed and things to happen word for word.. So seriously stop raging on a help forum.. it makes YOU look silly.. |
Electro*;
Please lighten up---above is unnecessarily harsh treament of a newbie. kwsnow; Have you installed mplayer? In addition to the "apt-get" method, you can also use the GUI package manager (Synaptic or Adept, as I recall) |
Quote:
the thing that many people do not realize is that setting up a Linux system is actually faster and easier than the equivalent Windows system |
Quote:
kweihs1@kyle-laptop:~/Desktop$ apt-get mplayer E: Invalid operation mplayer kweihs1@kyle-laptop:~/Desktop$ mplayer The program 'mplayer' is currently not installed. You can install it by typing: sudo apt-get install mplayer-nogui mplayer: command not found kweihs1@kyle-laptop:~/Desktop$ sudo apt-get install mplayer-nogui [sudo] password for kweihs1: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libaudio2 libavcodec52 libavformat52 libavutil49 libfaac0 liblzo2-2 libmp3lame0 libopenal1 libpostproc51 libsvga1 libswscale0 libx264-67 libxvidcore4 Suggested packages: nas mplayer-doc netselect fping nvidia-libvdpau1 nvidia-libvdpau The following NEW packages will be installed: libaudio2 libavcodec52 libavformat52 libavutil49 libfaac0 liblzo2-2 libmp3lame0 libopenal1 libpostproc51 libsvga1 libswscale0 libx264-67 libxvidcore4 mplayer-nogui 0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded. Need to get 6,246kB of archives. After this operation, 15.4MB of additional disk space will be used. Do you want to continue [Y/n]? yes Get:1 http://us.archive.ubuntu.com karmic/main libaudio2 1.9.2-1 [84.8kB] Get:2 http://us.archive.ubuntu.com karmic/main libavutil49 4:0.5+svn20090706-2ubuntu2 [64.0kB] Get:3 http://us.archive.ubuntu.com karmic/main libavcodec52 4:0.5+svn20090706-2ubuntu2 [2,184kB] Get:4 http://us.archive.ubuntu.com karmic/main libavformat52 4:0.5+svn20090706-2ubuntu2 [366kB] Get:5 http://us.archive.ubuntu.com karmic/multiverse libfaac0 1.26-0.1ubuntu2 [62.2kB] Get:6 http://us.archive.ubuntu.com karmic/main liblzo2-2 2.03-1 [60.7kB] Get:7 http://us.archive.ubuntu.com karmic/multiverse libmp3lame0 3.98.2+debian-0ubuntu2 [260kB] Get:8 http://us.archive.ubuntu.com karmic/main libpostproc51 4:0.5+svn20090706-2ubuntu2 [56.9kB] Get:9 http://us.archive.ubuntu.com karmic/universe libsvga1 1:1.4.3-27ubuntu1 [306kB] Get:10 http://us.archive.ubuntu.com karmic/main libswscale0 4:0.5+svn20090706-2ubuntu2 [118kB] Get:11 http://us.archive.ubuntu.com karmic/universe libx264-67 1:0.svn20090621+git364d7d-0ubuntu2 [258kB] Get:12 http://us.archive.ubuntu.com karmic/multiverse libxvidcore4 2:1.1.2-0.1ubuntu4 [205kB] Get:13 http://us.archive.ubuntu.com karmic/universe libopenal1 1:1.8.466-2 [105kB] Get:14 http://us.archive.ubuntu.com karmic-updates/multiverse mplayer-nogui 2:1.0~rc3+svn20090426-1ubuntu10.1 [2,115kB] Fetched 6,246kB in 5s (1,097kB/s) Selecting previously deselected package libaudio2. (Reading database ... 183619 files and directories currently installed.) Unpacking libaudio2 (from .../libaudio2_1.9.2-1_amd64.deb) ... Selecting previously deselected package libavutil49. Unpacking libavutil49 (from .../libavutil49_4%3a0.5+svn20090706-2ubuntu2_amd64.deb) ... Selecting previously deselected package libavcodec52. Unpacking libavcodec52 (from .../libavcodec52_4%3a0.5+svn20090706-2ubuntu2_amd64.deb) ... Selecting previously deselected package libavformat52. Unpacking libavformat52 (from .../libavformat52_4%3a0.5+svn20090706-2ubuntu2_amd64.deb) ... Selecting previously deselected package libfaac0. Unpacking libfaac0 (from .../libfaac0_1.26-0.1ubuntu2_amd64.deb) ... Selecting previously deselected package liblzo2-2. Unpacking liblzo2-2 (from .../liblzo2-2_2.03-1_amd64.deb) ... Selecting previously deselected package libmp3lame0. Unpacking libmp3lame0 (from .../libmp3lame0_3.98.2+debian-0ubuntu2_amd64.deb) ... Selecting previously deselected package libpostproc51. Unpacking libpostproc51 (from .../libpostproc51_4%3a0.5+svn20090706-2ubuntu2_amd64.deb) ... Selecting previously deselected package libsvga1. Unpacking libsvga1 (from .../libsvga1_1%3a1.4.3-27ubuntu1_amd64.deb) ... Selecting previously deselected package libswscale0. Unpacking libswscale0 (from .../libswscale0_4%3a0.5+svn20090706-2ubuntu2_amd64.deb) ... Selecting previously deselected package libx264-67. Unpacking libx264-67 (from .../libx264-67_1%3a0.svn20090621+git364d7d-0ubuntu2_amd64.deb) ... Selecting previously deselected package libxvidcore4. Unpacking libxvidcore4 (from .../libxvidcore4_2%3a1.1.2-0.1ubuntu4_amd64.deb) ... Selecting previously deselected package libopenal1. Unpacking libopenal1 (from .../libopenal1_1%3a1.8.466-2_amd64.deb) ... Selecting previously deselected package mplayer-nogui. Unpacking mplayer-nogui (from .../mplayer-nogui_2%3a1.0~rc3+svn20090426-1ubuntu10.1_amd64.deb) ... Processing triggers for man-db ... Setting up libaudio2 (1.9.2-1) ... Setting up libavutil49 (4:0.5+svn20090706-2ubuntu2) ... Setting up libavcodec52 (4:0.5+svn20090706-2ubuntu2) ... Setting up libavformat52 (4:0.5+svn20090706-2ubuntu2) ... Setting up libfaac0 (1.26-0.1ubuntu2) ... Setting up liblzo2-2 (2.03-1) ... Setting up libmp3lame0 (3.98.2+debian-0ubuntu2) ... Setting up libpostproc51 (4:0.5+svn20090706-2ubuntu2) ... Setting up libsvga1 (1:1.4.3-27ubuntu1) ... Setting up libswscale0 (4:0.5+svn20090706-2ubuntu2) ... Setting up libx264-67 (1:0.svn20090621+git364d7d-0ubuntu2) ... Setting up libxvidcore4 (2:1.1.2-0.1ubuntu4) ... Setting up libopenal1 (1:1.8.466-2) ... Setting up mplayer-nogui (2:1.0~rc3+svn20090426-1ubuntu10.1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place |
Quote:
kweihs1@kyle-laptop:~/Desktop$ mplayer -ao help MPlayer UNKNOWN-4.4.1 (C) 2000-2009 MPlayer Team Available audio output drivers: oss OSS/ioctl audio output alsa ALSA-0.9.x-1.x audio output esd EsounD audio output pulse PulseAudio audio output jack JACK audio output nas NAS audio output sdl SDLlib audio output openal OpenAL audio output mpegpes DVB audio output v4l2 V4L2 MPEG Audio Decoder output null Null audio output pcm RAW PCM/WAVE file writer audio output Turn off pulseaudio and artsd. Also set the sound server to ALSA which is a lot better than those and it is the main one. ^that i am really lost on how to.. |
All times are GMT -5. The time now is 10:11 PM. |