LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   No display on Geforce 7300GS with Asrock 939NF4G-SATA2 (https://www.linuxquestions.org/questions/linux-hardware-18/no-display-on-geforce-7300gs-with-asrock-939nf4g-sata2-503600/)

gizmm0 11-21-2006 10:52 AM

No display on Geforce 7300GS with Asrock 939NF4G-SATA2
 
Hello,

I have some trouble using my pcie video card Gigabyte GV-NX73G128D-RH with my mother board Asrock 939NF4G-SATA2 instead of the onboard geforce 6100. I can't get any display from the pcie card, and lspci does not see anything. I can not really disable the onboard card from the bios, i can only choose the primary graphic adaptator between PCI, PCIE and onboard. If choose PCIE, there is no display from the pcie card, and after a few seconds, there is a display from the onboard video card.
I have tried installing/removing the nvidia drivers in windows. Oddly enough it helped : i mean windows was able to see the geforce 7300 but was not using it. I rebooted to see what lspci would say but it was gone (also in windows). Unfortunatly i am not able to reproduce this.
This doesnt seems to come from the psu (i changed for a fortron it didnt help). Also i tried with another GV-NX73G128D-RH card, it didnt make any difference. I have also updated my bios.

The output of dmesg and lspci are the same, no matter the card is plugged in or not.
I am running a debian testing 64 bits with kernel 2.6.18.2, but with another kernel or a livecd, the card is also not detected.

Any idea?



Some infos :
Code:

lspci -v
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
        Subsystem: ASRock Incorporation Unknown device 02f1
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
        Capabilities: [e0] HyperTransport: MSI Mapping

00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
        Subsystem: ASRock Incorporation Unknown device 02fa
        Flags: 66MHz, fast devsel

00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
        Subsystem: ASRock Incorporation Unknown device 02fe
        Flags: 66MHz, fast devsel

00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
        Subsystem: ASRock Incorporation Unknown device 02f8
        Flags: 66MHz, fast devsel

00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
        Subsystem: ASRock Incorporation Unknown device 02f9
        Flags: bus master, 66MHz, fast devsel, latency 0

00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
        Subsystem: ASRock Incorporation Unknown device 02ff
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: [44] #00 [00fe]
        Capabilities: [fc] #00 [0000]

00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
        Subsystem: ASRock Incorporation Unknown device 027f
        Flags: 66MHz, fast devsel

00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
        Subsystem: ASRock Incorporation Unknown device 027e
        Flags: 66MHz, fast devsel

00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
        Capabilities: [60] HyperTransport: MSI Mapping
        Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
        Capabilities: [60] HyperTransport: MSI Mapping
        Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
        Capabilities: [60] HyperTransport: MSI Mapping
        Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:05.0 VGA compatible controller: nVidia Corporation C51G [GeForce 6100] (rev a2) (prog-if 00 [VGA])
        Subsystem: ASRock Incorporation Unknown device 0242
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at febe0000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
        Subsystem: ASRock Incorporation Unknown device 0270
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
        Capabilities: [e0] HyperTransport: MSI Mapping

00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
        Subsystem: ASRock Incorporation Unknown device 0261
        Flags: bus master, 66MHz, fast devsel, latency 0

00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
        Subsystem: ASRock Incorporation Unknown device 0264
        Flags: 66MHz, fast devsel, IRQ 11
        I/O ports at 5000 [size=64]
        I/O ports at 6000 [size=64]
        Capabilities: [44] Power Management version 2

00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 10 [OHCI])
        Subsystem: ASRock Incorporation Unknown device 026d
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
        Memory at febde000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 20 [EHCI])
        Subsystem: ASRock Incorporation Unknown device 026e
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
        Memory at febdfc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port
        Capabilities: [80] Power Management version 2

00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
        Subsystem: ASRock Incorporation Unknown device 0265
        Flags: bus master, 66MHz, fast devsel, latency 0
        I/O ports at ffa0 [size=16]
        Capabilities: [44] Power Management version 2

00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
        Subsystem: ASRock Incorporation Unknown device 0266
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
        I/O ports at 0f80 [size=8]
        I/O ports at 0f00 [size=4]
        I/O ports at 0e80 [size=8]
        I/O ports at 0e00 [size=4]
        I/O ports at e000 [size=16]
        Memory at febdd000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
        Capabilities: [cc] HyperTransport: MSI Mapping

00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        Memory behind bridge: faa00000-faafffff
        Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device 0000
        Capabilities: [8c] HyperTransport: MSI Mapping

00:10.2 Multimedia audio controller: nVidia Corporation MCP51 AC97 Audio Controller (rev a2)
        Subsystem: ASRock Incorporation Unknown device 0850
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
        I/O ports at d800 [size=256]
        I/O ports at d400 [size=256]
        Memory at febdc000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
        Subsystem: ASRock Incorporation Unknown device 0269
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
        Memory at febdb000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at dc00 [size=8]
        Capabilities: [44] Power Management version 2

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel

04:08.0 Network controller: IBM Unknown device 0201 (rev 01)
        Subsystem: CNet Technology Inc Unknown device 0020
        Flags: bus master, slow devsel, latency 32, IRQ 11
        Memory at faafe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [40] Power Management version 2

Code:

dmesg
Bootdata ok (command line is root=/dev/sda1 ro vga=791)
Linux version 2.6.18.2 (root@coqiz) (version gcc 4.1.2 20061028 (prerelease) (Debian 4.1.1-19)) #1 Sun Nov 19 20:01:23 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bfb0000 (usable)
 BIOS-e820: 000000001bfb0000 - 000000001bfc0000 (ACPI data)
 BIOS-e820: 000000001bfc0000 - 000000001bff0000 (ACPI NVS)
 BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fa650
ACPI: RSDT (v001 A M I  OEMRSDT  0x03000615 MSFT 0x00000097) @ 0x000000001bfb0000
ACPI: FADT (v002 A M I  OEMFACP  0x03000615 MSFT 0x00000097) @ 0x000000001bfb0200
ACPI: MADT (v001 A M I  OEMAPIC  0x03000615 MSFT 0x00000097) @ 0x000000001bfb0390
ACPI: MCFG (v001 A M I  OEMMCFG  0x03000615 MSFT 0x00000097) @ 0x000000001bfb0400
ACPI: OEMB (v001 A M I  AMI_OEM  0x03000615 MSFT 0x00000097) @ 0x000000001bfc0040
ACPI: DSDT (v001  939N6 939N6147 0x00000147 INTL 0x02002026) @ 0x0000000000000000
On node 0 totalpages: 112235
  DMA zone: 3233 pages, LIFO batch:0
  DMA32 zone: 109002 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
Built 1 zonelists.  Total pages: 112235
Kernel command line: root=/dev/sda1 ro vga=791
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 1808.239 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Checking aperture...
CPU 0: aperture @ 40000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 447848k/458432k available (1640k kernel code, 9920k reserved, 722k data, 160k init)
Calibrating delay using timer specific routine.. 3618.32 BogoMIPS (lpj=1809162)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12557223
Detected 12.557 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:05.0
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: 00:0c: ioport range 0x290-0x29f has been reserved
PCI: Bridge: 0000:00:02.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:10.0
  IO window: disabled.
  MEM window: faa00000-faafffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:03.0 to 64
pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
libata version 2.00 loaded.
sata_nv 0000:00:0e.0: version 2.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
GSI 16 sharing vector 0xB1 and IRQ 16
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata1: SATA max UDMA/133 cmd 0xF80 ctl 0xF02 bmdma 0xE000 irq 16
ata2: SATA max UDMA/133 cmd 0xE80 ctl 0xE02 bmdma 0xE008 irq 16
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xE87
  Vendor: ATA      Model: HDT722525DLA380  Rev: V44O
  Type:  Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Losing some ticks... checking if CPU frequency changed.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: PC Speaker as /class/input/input1
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
GSI 17 sharing vector 0xB9 and IRQ 17
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
eth0: forcedeth.c: subsystem: 01849:0269 bound to 0000:00:14.0
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
GSI 18 sharing vector 0xC1 and IRQ 18
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 18, io mem 0xfebde000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 161
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usb 1-5: new low speed USB device using ohci_hcd and address 2
hda: ST380011A, ATA DISK drive
usb 1-5: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
input: PS/2+USB Mouse as /class/input/input2
input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:0b.0-5
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
hdc: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 19, io mem 0xfebdfc00
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb 1-5: USB disconnect, address 2
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
GSI 20 sharing vector 0xD1 and IRQ 20
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNEC] -> GSI 19 (level, low) -> IRQ 20
PCI: Unable to reserve mem region #2:10000000@d0000000 for device 0000:00:05.0
nvidiafb: cannot request PCI regions
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x6000
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LACI] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:10.2 to 64
intel8x0_measure_ac97_clock: measured 50512 usecs
intel8x0: clocking to 46776
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1
usb 1-5: new low speed USB device using ohci_hcd and address 3
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 1-5: configuration #1 chosen from 1 choice
input: PS/2+USB Mouse as /class/input/input3
input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:0b.0-5
Adding 2000084k swap on /dev/sda2.  Priority:-1 extents:1 across:2000084k
EXT3 FS on sda1, internal journal
loop: loaded (max 8 devices)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Getting cpuindex for acpiid 0x2
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
eth0: no IPv6 routers present
nvidia: module license 'NVIDIA' taints kernel.
PCI: Setting latency timer of device 0000:00:05.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-8774  Tue Aug  1 21:42:17 PDT 2006
PCI: Setting latency timer of device 0000:00:05.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-9629  Wed Nov  1 19:27:33 PST 2006
PCI: Setting latency timer of device 0000:00:05.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-9629  Wed Nov  1 19:27:33 PST 2006


Quakeboy02 11-22-2006 11:35 AM

Have you tried configuring both cards into your XF86Config-4 and then using screen 2?


All times are GMT -5. The time now is 12:22 PM.