Hotplugging Sony Clie SJ20 on Suse 9
Hi:
I am now using Suse 9. I have a sony clie SJ20 and I would like to hotsync with it using kpliot. However, I tried the following list of device with no success: /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3 /dev/usb/ttyUSB0 /dev/usb/ttyUSB1 /dev/usb/ttyUSB2 /dev/usb/ttyUSB3 I saw that hotplugging was started as a service when my system boots up, and the following is a piece of my dmesg output: usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:13.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:13.2: irq 10, pci mem e18d5f00 usb.c: new USB bus registered, assigned bus number 1 PCI: 00:13.2 PCI cache line size set incorrectly (32 bytes) by BIOS/FW. PCI: 00:13.2 PCI cache line size corrected to 64. ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 4 ports detected usb-uhci.c: $Revision: 1.275 $ time 00:25:26 Nov 14 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 usb-ohci.c: USB OHCI at membase 0xe18d7000, IRQ 5 usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xe18d9000, IRQ 10 usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 5 hub.c: USB hub found hub.c: 3 ports detected mice: PS/2 mouse device common for all mice Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1) intel8x0: clocking to 48000 bootsplash: silent jpeg found. eth0: no IPv6 routers present parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux video capture interface: v1.00usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:13.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:13.2: irq 10, pci mem e18d5f00 usb.c: new USB bus registered, assigned bus number 1 PCI: 00:13.2 PCI cache line size set incorrectly (32 bytes) by BIOS/FW. PCI: 00:13.2 PCI cache line size corrected to 64. ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 4 ports detected usb-uhci.c: $Revision: 1.275 $ time 00:25:26 Nov 14 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 usb-ohci.c: USB OHCI at membase 0xe18d7000, IRQ 5 usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xe18d9000, IRQ 10 usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 5 hub.c: USB hub found hub.c: 3 ports detected mice: PS/2 mouse device common for all mice Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1) intel8x0: clocking to 48000 bootsplash: silent jpeg found. eth0: no IPv6 routers present parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux video capture interface: v1.00 |
All times are GMT -5. The time now is 01:12 AM. |