Hi:

I am now using Suse 9. I have a sony clie SJ20 and I would like to hotsync with it using kpliot.

However, I tried the following list of device with no success:

/dev/ttyUSB0
/dev/ttyUSB1
/dev/ttyUSB2
/dev/ttyUSB3
/dev/usb/ttyUSB0
/dev/usb/ttyUSB1
/dev/usb/ttyUSB2
/dev/usb/ttyUSB3

I saw that hotplugging was started as a service when my system boots up, and the following is a piece of my dmesg output:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:13.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:13.2: irq 10, pci mem e18d5f00
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:13.2 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:13.2 PCI cache line size corrected to 64.
ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 4 ports detected
usb-uhci.c: $Revision: 1.275 $ time 00:25:26 Nov 14 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-ohci.c: USB OHCI at membase 0xe18d7000, IRQ 5
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xe18d9000, IRQ 10
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 3 ports detected
mice: PS/2 mouse device common for all mice
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1)
intel8x0: clocking to 48000
bootsplash: silent jpeg found.
eth0: no IPv6 routers present
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux video capture interface: v1.00usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:13.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:13.2: irq 10, pci mem e18d5f00
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:13.2 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:13.2 PCI cache line size corrected to 64.
ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 4 ports detected
usb-uhci.c: $Revision: 1.275 $ time 00:25:26 Nov 14 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-ohci.c: USB OHCI at membase 0xe18d7000, IRQ 5
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xe18d9000, IRQ 10
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 3 ports detected
mice: PS/2 mouse device common for all mice
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1)
intel8x0: clocking to 48000
bootsplash: silent jpeg found.
eth0: no IPv6 routers present
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux video capture interface: v1.00