Conexant Access Runner Usb Adsl modem suse 10 (newbie)
 

Hello everyone

i am trying for about a week to make my modem work on suse 10. (Access Runner Dsl Conexant Usb or else Crypto F200)

Do i have to recompile the cernel ? My kernel is 2.6.13-15-default. I found some articles that saying that pppoatm and cxacru modules are included in this version and the only thing i have to do is put a firmware in the directory lib/firware.

An so i did. After that, my modem seems to syncronize but still dont work.
I take the error message
( no device (8.35)) from kinternet
and with the command pppd (mypeer) i get an error at 8.35 line which is the VPI,VCI.

I am very close to try another distubition ( possibly mandrake ) because i cant find detailed infos on who to get things worked with suse.


Here is my dmesg outpout ( only the intresting lines )

usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 9, io base 0x0000d400
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 9, io base 0x0000d800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
atm: module not supported by Novell, setting U taint flag.
usbatm: module not supported by Novell, setting U taint flag.
cxacru: module not supported by Novell, setting U taint flag.
usbcore: registered new driver cxacru
cxacru 1-2:1.0: found firmware cxacru-fw.bin
cxacru 1-2:1.0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -110

i get this

linux kernel: cxacru 1-2:1.0: firmware (cxacru-fw.bin) unavailable (hotplug misconfiguration?)

in /var/log/messages/

what is wrong? i put cxacru-fw.bin in lib/firmware. where am i suppose to put it?