| eantoranz |
10-20-2005 07:43 PM |
xorg doesn't want to use the nvidia driver
I downloaded the nvidia driver from the nvidia page.
Installed it. I modified the xorg.conf file.
But X still loads the nv driver. Why is that? :scratch:
This is the output from x.0.log
Code:
X Window System Version 6.8.2 (Ubuntu (static) 6.8.2-77 20051010174523 root@vernadsky.buildd)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.10 i686 [ELF]
Current Operating System: Linux galileo 2.6.12-9-686 #1 Mon Oct 10 13:25:32 BST 2005 i686
Build Date: 10 October 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
OS Kernel: Linux version 2.6.12-9-686 (buildd@rothera) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Oct 10 13:25:32 BST 2005 T
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 20:33:04 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "FlatPanel Laptop"
(**) | |-->Device "nvidia"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) The directory "/usr/share/X11/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/CID/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Speedo/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/TrueType/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/freefont/" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/share/X11/fonts/misc/,/usr/share/X11/fonts/Type1/,/usr/share/X11/fonts/75dpi/,/usr/share/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,244c card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244a card 8086,4541 rev 03 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 03 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0112 card 1028,00e6 rev b2 class 03,00,00 hdr 00
(II) PCI: 02:03:0: chip 125d,1998 card 1028,00e6 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:06:0: chip 1668,0100 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 02:0f:0: chip 104c,ac42 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:1: chip 104c,ac42 card 4800,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:2: chip 104c,8027 card 1028,00e6 rev 00 class 0c,00,10 hdr 80
(II) PCI: 08:04:0: chip 8086,1229 card 1668,1100 rev 08 class 02,00,00 hdr 00
(II) PCI: 08:08:0: chip 11c1,0448 card 1668,2400 rev 01 class 07,80,00 hdr 00
(II) PCI: 0d:00:0: chip 1814,0201 card 1462,6835 rev 01 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,13), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[8] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[9] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[10] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[11] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf2000000 - 0xfbffffff (0xa000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (2:6:0), (2,8,8), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 8 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 9: bridge is at (2:15:0), (2,9,12), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 13: bridge is at (2:15:1), (2,13,16), BCTRL: 0x0500 (VGA_EN is cleared)
(--) PCI:*(1:0:0) nVidia Corporation NV11 [GeForce2 Go] rev 178, Mem @ 0xfc000000/24, 0xe0000000/27
(II) Addressable bus resource ranges are
. blah blah
.
.
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700,
GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra,
GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345,
GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B,
Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra,
GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, 0x0049,
Quadro FX 4000, 0x00C0, GeForce 6800, GeForce 6800 LE,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400, 0x00CD,
Quadro FX 1400, GeForce 6600 GT, GeForce 6600, 0x0142, 0x0143,
GeForce Go 6600, GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, 0x0147,
GeForce Go 6600, 0x0149, 0x014B, 0x014C, 0x014D, Quadro FX 540,
GeForce 6200, 0x0160, GeForce 6200 TurboCache(TM), 0x0162, 0x0163,
GeForce Go 6200, 0x0163, GeForce Go 6250, GeForce Go 6200,
GeForce Go 6250, 0x0169, 0x016B, 0x016C, 0x016D, 0x016E, 0x0210,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, 0x0220, 0x0221,
0x0222, 0x0228
(II) TGA: driver for Digital chipsets: tga, tga2
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
. blah blah
.
.
.
(II) IMSTT: driver (version 1.0.0) for IMS TwinTurbo chipsets : imstt128,
imstt3d
(II) NEWPORT: driver for Newport Graphics Card: XL
(II) ARK: driver (version 0.5.0 for ARK Logic chipset: ark1000pv,
ark2000pv, ark2000mt
(II) CYRIX: driver for Cyrix MediaGX Processors: mediagx
(II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx chipsets:
Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) DUMMY: Driver for Dummy chipsets: dummy
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) v4l driver for Video4Linux
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce2 Go found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x20ffffff (0x20f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x21000000 - 0x21001fff (0x2000) MX[B]
[6] -1 0 0xf8ffec00 - 0xf8ffecff (0x100) MX[B]
[7] -1 0 0xf8e00000 - 0xf8efffff (0x100000) MX[B]
[8] -1 0 0xf8fff000 - 0xf8ffffff (0x1000) MX[B]
[9] -1 0 0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]
[10] -1 0 0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]
[11] -1 0 0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]
[12] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
. blah blah
.
.
[23] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[24] -1 0 0x0000bce0 - 0x0000bcff (0x20) IX[B]
[25] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce2 Go"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE0000000
(--) NV(0): MMIO registers at 0xFC000000
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: SHP Model: 138a Serial#: 0
(II) NV(0): Year: 1990 Week: 0
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.604 redY: 0.318 greenX: 0.296 greenY: 0.570
(II) NV(0): blueX: 0.138 blueY: 0.134 whiteX: 0.312 whiteY: 0.328
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 160.0 MHz Image Size: 304 x 228 mm
(II) NV(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2112 h_border: 0
(II) NV(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(--) NV(0): CRTC 1 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 1
(--) NV(0): Panel size is 1600 x 1200
(--) NV(0): VideoRAM: 32768 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) NV(0): config file hsync range 31.5-90kHz not within DDC hsync ranges.
(II) NV(0): FlatPanel Laptop: Using hsync range of 31.50-90.00 kHz
(II) NV(0): FlatPanel Laptop: Using vrefresh value of 60.00 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1792x1344" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1792x1344" (unknown reason)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1792x1344" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1792x1344" (unknown reason)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1856x1392" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1856x1392" (unknown reason)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1856x1392" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1856x1392" (unknown reason)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
. blah blah
.
.
.
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1680x1050" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1680x1050" (unknown reason)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1200" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1920x1200" (unknown reason)
(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1200" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1920x1200" (unknown reason)
(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) NV(0): Virtual size is 1600x1200 (pitch 1600)
(**) NV(0): *Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
(**) NV(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
. blah blah
.
.
(**) NV(0): Default mode "1440x900": 108.8 MHz, 56.9 kHz, 60.2 Hz
(II) NV(0): Modeline "1440x900" 108.84 1440 1472 1880 1912 900 918 927 946 +hsync +vsync
(**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) NV(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
(**) NV(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
(--) NV(0): Display dimensions: (300, 230) mm
(--) NV(0): DPI set to (135, 132)
(--) Depth 24 pixmap format is 32 bpp
(II) resource ranges after preInit:
[0] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[1] 0 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B]
. blah blah
.
.
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xe0000000,0x2000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
29 256x256 slots
14 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "es"
(**) Keyboard1: XkbLayout: "es"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9
|
