Okay, so I went through a nightmare of a sound problem. Now that is fixed and I have sound but it is way too quiet. I can barely hear it when it is turned all the way up. What now? I finally got this card to work with alsaconf which I had to compile from source. I also noticed that probe Legacy ISA non pnp was an option. In vista my sound driver was called legacy HD so I suspect there is a second card that is high def. I tried that option though and it gave me:

Building card database..
modinfo: could not find module snd-opl3sa2
modinfo: could not find module snd-cs4236
modinfo: could not find module snd-cs4232
modinfo: could not find module snd-cs4231
modinfo: could not find module snd-es18xx
modinfo: could not find module snd-es1688
modinfo: could not find module snd-sb16
modinfo: could not find module snd-sb8



Here is my hwinfo --sound

22: PCI 14.2: 0403 Audio device
[Created at pci.296]
UDI: /org/freedesktop/Hal/devices/pci_1002_4383
Unique ID: 5Dex.PXdlZDpmWKD
SysFS ID: /devices/pci0000:00/0000:00:14.2
SysFS BusID: 0000:00:14.2
Hardware Class: sound
Model: "Dell Audio device"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4383
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x01fd
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfebfc000-0xfebfffff (rw,non-prefetchable)
IRQ: 16 (429662 events)
Module Alias: "pci:v00001002d00004383sv00001028sd000001FDbc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown

here is my lspci:

00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1)
00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
0b:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01)

Please post your thread in only one forum. Posting a single thread in the most relevant forum will make it easier for members to help you and will keep the discussion in one place. This thread is being closed because it is a duplicate.

Continue here: http://www.linuxquestions.org/questi...odules-660690/