LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Ubuntu
User Name
Password
Ubuntu This forum is for the discussion of Ubuntu Linux.

Notices


Reply
  Search this Thread
Old 08-08-2005, 12:26 PM   #1
akudewan
Member
 
Registered: Apr 2004
Location: India
Distribution: Ubuntu
Posts: 364

Rep: Reputation: 30
Root partition doesn't unmount on poweroff


Hi everyone,

I'm running Ubuntu 5.04 on my machine. When I poweroff the machine from a terminal or by pressing the "power" button, the root partition doesn't unmount cleanly and it checks the drive for errors on restarting. This *dosen't* happen when I poweroff from GDM or from Xfce.
Can anyone help me with this? I use the commands like "sleep <time> && poweroff" very often, so it gets annoying when fsck runs on startup. (the filesystem is ext2).
Also, /home is another (ext2) partition, but there are no problems unmounting /home.

Thanks.
 
Old 08-08-2005, 01:21 PM   #2
Andrew Benton
Senior Member
 
Registered: Aug 2003
Location: Birkenhead/Britain
Distribution: Linux From Scratch
Posts: 2,073

Rep: Reputation: 64
Does it work OK if you shutdown with the command init 0
 
Old 08-09-2005, 11:40 AM   #3
akudewan
Member
 
Registered: Apr 2004
Location: India
Distribution: Ubuntu
Posts: 364

Original Poster
Rep: Reputation: 30
No, "init 0" also fails to unmount the partition.
 
Old 08-11-2005, 04:44 AM   #4
akudewan
Member
 
Registered: Apr 2004
Location: India
Distribution: Ubuntu
Posts: 364

Original Poster
Rep: Reputation: 30
I guess the next step would be to probe into some log files, right? But I dont know where to look. And what exactly should I look for?
 
Old 09-03-2005, 01:02 AM   #5
akudewan
Member
 
Registered: Apr 2004
Location: India
Distribution: Ubuntu
Posts: 364

Original Poster
Rep: Reputation: 30
Post

Here is an output of /var/log/messages. I had my system poweroff at 7:30 in the morning, and I turned it on again at about 11am.
I can't see anything wrong in the log though. (Damn this is large)

Code:
Sep  3 07:08:45 ranjan404 -- MARK --
Sep  3 07:28:46 ranjan404 -- MARK --
Sep  3 07:37:45 ranjan404 shutdown[21523]: shutting down for system halt
Sep  3 07:37:59 ranjan404 gconfd (akudewan-6913): Received signal 15, shutting down cleanly
Sep  3 07:38:01 ranjan404 gconfd (akudewan-6913): Exiting
Sep  3 07:38:12 ranjan404 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Sep  3 07:38:12 ranjan404 kernel: apm: disabled on user request.
Sep  3 07:38:16 ranjan404 kernel: Kernel logging (proc) stopped.
Sep  3 07:38:16 ranjan404 kernel: Kernel log daemon terminating.
Sep  3 07:38:16 ranjan404 exiting on signal 15
Sep  3 11:03:52 ranjan404 syslogd 1.4.1#16ubuntu6: restart.
Sep  3 11:03:53 ranjan404 kernel: Inspecting /boot/System.map-2.6.10-5-686
Sep  3 11:03:53 ranjan404 kernel: Loaded 26806 symbols from /boot/System.map-2.6.10-5-686.
Sep  3 11:03:53 ranjan404 kernel: Symbols match kernel version 2.6.10.
Sep  3 11:03:53 ranjan404 kernel: No module symbols loaded - kernel modules not enabled.
Sep  3 11:03:53 ranjan404 kernel: Linux version 2.6.10-5-686 (buildd@terranova) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Thu Aug 18 22:39:14 UTC 2005
Sep  3 11:03:53 ranjan404 kernel: BIOS-provided physical RAM map:
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  3 11:03:53 ranjan404 kernel:  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Sep  3 11:03:53 ranjan404 kernel: 0MB HIGHMEM available.
Sep  3 11:03:53 ranjan404 kernel: 255MB LOWMEM available.
Sep  3 11:03:53 ranjan404 kernel: found SMP MP-table at 000f5bb0
Sep  3 11:03:53 ranjan404 kernel: DMI 2.2 present.
Sep  3 11:03:53 ranjan404 kernel: ACPI: PM-Timer IO Port: 0x408
Sep  3 11:03:53 ranjan404 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep  3 11:03:53 ranjan404 kernel: Processor #0 15:1 APIC version 20
Sep  3 11:03:53 ranjan404 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep  3 11:03:53 ranjan404 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep  3 11:03:53 ranjan404 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  3 11:03:53 ranjan404 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  3 11:03:53 ranjan404 kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  3 11:03:53 ranjan404 kernel: Using ACPI (MADT) for SMP configuration information
Sep  3 11:03:53 ranjan404 kernel: Built 1 zonelists
Sep  3 11:03:53 ranjan404 kernel: Kernel command line: root=/dev/hda3 ro quiet splash
Sep  3 11:03:53 ranjan404 kernel: Initializing CPU#0
Sep  3 11:03:53 ranjan404 kernel: PID hash table entries: 1024 (order: 10, 16384 bytes)
Sep  3 11:03:53 ranjan404 kernel: Detected 1600.213 MHz processor.
Sep  3 11:03:53 ranjan404 kernel: Using pmtmr for high-res timesource
Sep  3 11:03:53 ranjan404 kernel: Console: colour VGA+ 80x25
Sep  3 11:03:53 ranjan404 kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  3 11:03:53 ranjan404 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  3 11:03:53 ranjan404 kernel: Memory: 251728k/262080k available (1587k kernel code, 9776k reserved, 714k data, 164k init, 0k highmem)
Sep  3 11:03:53 ranjan404 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Sep  3 11:03:53 ranjan404 kernel: Security Framework v1.0.0 initialized
Sep  3 11:03:53 ranjan404 kernel: SELinux:  Disabled at boot.
Sep  3 11:03:53 ranjan404 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Sep  3 11:03:53 ranjan404 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Sep  3 11:03:53 ranjan404 kernel: CPU: L2 cache: 256K
Sep  3 11:03:53 ranjan404 kernel: Intel machine check architecture supported.
Sep  3 11:03:53 ranjan404 kernel: Intel machine check reporting enabled on CPU#0.
Sep  3 11:03:53 ranjan404 kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Sep  3 11:03:53 ranjan404 kernel: CPU0: Thermal monitoring enabled
Sep  3 11:03:53 ranjan404 kernel: CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02
Sep  3 11:03:53 ranjan404 kernel: Enabling fast FPU save and restore... done.
Sep  3 11:03:53 ranjan404 kernel: Enabling unmasked SIMD FPU exception support... done.
Sep  3 11:03:53 ranjan404 kernel: Checking 'hlt' instruction... OK.
Sep  3 11:03:53 ranjan404 kernel: ACPI: Looking for DSDT in initrd... not found!Sep  3 11:03:53 ranjan404 kernel: ENABLING IO-APIC IRQs
Sep  3 11:03:53 ranjan404 kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Sep  3 11:03:53 ranjan404 kernel: checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Sep  3 11:03:53 ranjan404 kernel: Freeing initrd memory: 4600k freed
Sep  3 11:03:53 ranjan404 kernel: NET: Registered protocol family 16
Sep  3 11:03:53 ranjan404 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=2
Sep  3 11:03:53 ranjan404 kernel: PCI: Using configuration type 1
Sep  3 11:03:53 ranjan404 kernel: mtrr: v2.0 (20020519)
Sep  3 11:03:53 ranjan404 kernel: ACPI: Subsystem revision 20050211
Sep  3 11:03:53 ranjan404 kernel: ACPI: Interpreter enabled
Sep  3 11:03:53 ranjan404 kernel: ACPI: Using IOAPIC for interrupt routing
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Sep  3 11:03:53 ranjan404 kernel: PCI: Probing PCI hardware (bus 00)
Sep  3 11:03:53 ranjan404 kernel: PCI: Transparent bridge - 0000:00:1e.0
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Sep  3 11:03:53 ranjan404 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Sep  3 11:03:53 ranjan404 kernel: pnp: PnP ACPI init
Sep  3 11:03:53 ranjan404 kernel: pnp: PnP ACPI: found 15 devices
Sep  3 11:03:53 ranjan404 kernel: PnPBIOS: Disabled by ACPI PNP
Sep  3 11:03:53 ranjan404 kernel: PCI: Using ACPI for IRQ routing
Sep  3 11:03:53 ranjan404 kernel: ** PCI interrupts are no longer routed automatically.  If this
Sep  3 11:03:53 ranjan404 kernel: ** causes a device to stop working, it is probably because the
Sep  3 11:03:53 ranjan404 kernel: ** driver failed to call pci_enable_device().  As a temporary
Sep  3 11:03:53 ranjan404 kernel: ** workaround, the "pci=routeirq" argument restores the old
Sep  3 11:03:53 ranjan404 kernel: ** behavior.  If this argument makes the device work again,
Sep  3 11:03:53 ranjan404 kernel: ** please email the output of "lspci" to bjorn.helgaas@hp.com
Sep  3 11:03:53 ranjan404 kernel: ** so I can fix the driver.
Sep  3 11:03:53 ranjan404 kernel: pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
Sep  3 11:03:53 ranjan404 kernel: audit: initializing netlink socket (disabled)
Sep  3 11:03:53 ranjan404 kernel: VFS: Disk quotas dquot_6.5.1
Sep  3 11:03:53 ranjan404 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  3 11:03:53 ranjan404 kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Sep  3 11:03:53 ranjan404 kernel: devfs: boot_options: 0x0
Sep  3 11:03:53 ranjan404 kernel: Initializing Cryptographic API
Sep  3 11:03:53 ranjan404 kernel: isapnp: Scanning for PnP cards...
Sep  3 11:03:53 ranjan404 kernel: isapnp: No Plug & Play device found
Sep  3 11:03:53 ranjan404 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep  3 11:03:53 ranjan404 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  3 11:03:53 ranjan404 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Sep  3 11:03:53 ranjan404 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep  3 11:03:53 ranjan404 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep  3 11:03:53 ranjan404 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep  3 11:03:53 ranjan404 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep  3 11:03:53 ranjan404 kernel: io scheduler noop registered
Sep  3 11:03:53 ranjan404 kernel: io scheduler anticipatory registered
Sep  3 11:03:53 ranjan404 kernel: io scheduler deadline registered
Sep  3 11:03:53 ranjan404 kernel: io scheduler cfq registered
Sep  3 11:03:53 ranjan404 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Sep  3 11:03:53 ranjan404 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Sep  3 11:03:53 ranjan404 kernel: NET: Registered protocol family 2
Sep  3 11:03:53 ranjan404 kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Sep  3 11:03:53 ranjan404 kernel: TCP: Hash tables configured (established 16384 bind 32768)
Sep  3 11:03:53 ranjan404 kernel: NET: Registered protocol family 8
Sep  3 11:03:53 ranjan404 kernel: NET: Registered protocol family 20
Sep  3 11:03:53 ranjan404 kernel: Restarting tasks...<6> Strange, kswapd0 not stopped
Sep  3 11:03:53 ranjan404 kernel:  Strange, kseriod not stopped
Sep  3 11:03:53 ranjan404 kernel:  done
Sep  3 11:03:53 ranjan404 kernel: ACPI wakeup devices:
Sep  3 11:03:53 ranjan404 kernel: SLPB PCI0 HUB0 USB0 USB1 MODM UAR1 UAR2
Sep  3 11:03:53 ranjan404 kernel: ACPI: (supports S0 S1 S4 S5)
Sep  3 11:03:53 ranjan404 kernel: RAMDISK: cramfs filesystem found at block 0
Sep  3 11:03:53 ranjan404 kernel: RAMDISK: Loading 4600KiB [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^Hdone.
Sep  3 11:03:53 ranjan404 kernel: VFS: Mounted root (cramfs filesystem) readonly.
Sep  3 11:03:53 ranjan404 kernel: Freeing unused kernel memory: 164k freed
Sep  3 11:03:53 ranjan404 kernel: ACPI: Fan [FAN] (on)
Sep  3 11:03:53 ranjan404 kernel: ACPI: Processor [CPU0] (supports 2 throttling states)
Sep  3 11:03:53 ranjan404 kernel: ACPI: Thermal Zone [THRM] (22 C)
Sep  3 11:03:53 ranjan404 kernel: NET: Registered protocol family 1
Sep  3 11:03:53 ranjan404 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Sep  3 11:03:53 ranjan404 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep  3 11:03:53 ranjan404 kernel: ICH2: IDE controller at PCI slot 0000:00:1f.1
Sep  3 11:03:53 ranjan404 kernel: ICH2: chipset revision 5
Sep  3 11:03:53 ranjan404 kernel: ICH2: not 100%% native mode: will probe irqs later
Sep  3 11:03:53 ranjan404 kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
Sep  3 11:03:53 ranjan404 kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Sep  3 11:03:53 ranjan404 kernel: hda: SAMSUNG SP0802N, ATA DISK drive
Sep  3 11:03:53 ranjan404 kernel: elevator: using anticipatory as default io scheduler
Sep  3 11:03:53 ranjan404 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep  3 11:03:53 ranjan404 kernel: hda: max request size: 1024KiB
Sep  3 11:03:53 ranjan404 kernel: hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
Sep  3 11:03:53 ranjan404 kernel:  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4Sep  3 11:03:53 ranjan404 kernel: hdc: ST36422A, ATA DISK drive
Sep  3 11:03:53 ranjan404 kernel: hdd: SAMSUNG CD-R/RW SW-252B, ATAPI CD/DVD-ROM drive
Sep  3 11:03:53 ranjan404 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Sep  3 11:03:53 ranjan404 kernel: hdc: max request size: 128KiB
Sep  3 11:03:53 ranjan404 kernel: hdc: 12500460 sectors (6400 MB) w/256KiB Cache, CHS=13228/15/63, UDMA(33)
Sep  3 11:03:53 ranjan404 kernel:  /dev/ide/host0/bus1/target0/lun0: p1 p2 p3
Sep  3 11:03:53 ranjan404 kernel: Stopping tasks: ==|
Sep  3 11:03:53 ranjan404 kernel: Freeing memory...  ^H-^H\^H|^H/^Hdone (464 pages freed)
Sep  3 11:03:53 ranjan404 kernel: Restarting tasks... done
Sep  3 11:03:53 ranjan404 kernel: Adding 682752k swap on /dev/hdc3.  Priority:-1 extents:1
Sep  3 11:03:53 ranjan404 kernel: hdd: ATAPI 52X CD-ROM CD-R/RW drive, 8192kB Cache
Sep  3 11:03:53 ranjan404 kernel: Uniform CD-ROM driver Revision: 3.20
Sep  3 11:03:53 ranjan404 kernel: parport: PnPBIOS parport detected.
Sep  3 11:03:53 ranjan404 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Sep  3 11:03:53 ranjan404 kernel: lp0: using parport0 (interrupt-driven).
Sep  3 11:03:53 ranjan404 kernel: mice: PS/2 mouse device common for all mice
Sep  3 11:03:53 ranjan404 kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Sep  3 11:03:53 ranjan404 kernel: Linux agpgart interface v0.100 (c) Dave Jones
Sep  3 11:03:53 ranjan404 kernel: nvidia: module license 'NVIDIA' taints kernel.Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep  3 11:03:53 ranjan404 kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7174  Tue Mar 22 06:44:39 PST 2005
Sep  3 11:03:53 ranjan404 kernel: ts: Compaq touchscreen protocol output
Sep  3 11:03:53 ranjan404 kernel: Capability LSM initialized
Sep  3 11:03:53 ranjan404 kernel: device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
Sep  3 11:03:53 ranjan404 kernel: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Sep  3 11:03:53 ranjan404 kernel: cdrom: open failed.
Sep  3 11:03:53 ranjan404 kernel: Real Time Clock Driver v1.12
Sep  3 11:03:53 ranjan404 kernel: input: PC Speaker
Sep  3 11:03:53 ranjan404 kernel: inserting floppy driver for 2.6.10-5-686
Sep  3 11:03:53 ranjan404 kernel: Floppy drive(s): fd0 is 1.44M
Sep  3 11:03:53 ranjan404 kernel: FDC 0 is a post-1991 82077
Sep  3 11:03:53 ranjan404 kernel: agpgart: Detected an Intel i845 Chipset.
Sep  3 11:03:53 ranjan404 kernel: agpgart: Maximum main memory to use for agp memory: 203M
Sep  3 11:03:53 ranjan404 kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Sep  3 11:03:53 ranjan404 kernel: cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
Sep  3 11:03:53 ranjan404 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  3 11:03:53 ranjan404 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Sep  3 11:03:53 ranjan404 kernel: usbcore: registered new driver usbfs
Sep  3 11:03:53 ranjan404 kernel: usbcore: registered new driver hub
Sep  3 11:03:53 ranjan404 kernel: USB Universal Host Controller Interface driver v2.2
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
Sep  3 11:03:53 ranjan404 kernel: uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
Sep  3 11:03:53 ranjan404 kernel: uhci_hcd 0000:00:1f.2: irq 19, io base 0xd000
Sep  3 11:03:53 ranjan404 kernel: uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
Sep  3 11:03:53 ranjan404 kernel: hub 1-0:1.0: USB hub found
Sep  3 11:03:53 ranjan404 kernel: hub 1-0:1.0: 2 ports detected
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
Sep  3 11:03:53 ranjan404 kernel: uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
Sep  3 11:03:53 ranjan404 kernel: uhci_hcd 0000:00:1f.4: irq 23, io base 0xd800
Sep  3 11:03:53 ranjan404 kernel: uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
Sep  3 11:03:53 ranjan404 kernel: hub 2-0:1.0: USB hub found
Sep  3 11:03:53 ranjan404 kernel: hub 2-0:1.0: 2 ports detected
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
Sep  3 11:03:53 ranjan404 kernel: intel8x0_measure_ac97_clock: measured 49909 usecs
Sep  3 11:03:53 ranjan404 kernel: intel8x0: clocking to 48000
Sep  3 11:03:53 ranjan404 kernel: Linux Tulip driver version 1.1.13 (May 11, 2002)
Sep  3 11:03:53 ranjan404 kernel: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
Sep  3 11:03:53 ranjan404 kernel: tulip0:  MII transceiver #1 config 3100 status 7869 advertising 05e1.
Sep  3 11:03:53 ranjan404 kernel: tulip0:  MII transceiver #2 config 1000 status 786d advertising 05e1.
Sep  3 11:03:53 ranjan404 kernel: tulip0:  MII transceiver #3 config 1000 status 786d advertising 05e1.
Sep  3 11:03:53 ranjan404 kernel: tulip0:  MII transceiver #4 config 1000 status 786d advertising 05e1.
Sep  3 11:03:53 ranjan404 kernel: eth0: ADMtek Comet rev 17 at 0001c000, 00:10:B5:12:BB:F7, IRQ 22.
Sep  3 11:03:53 ranjan404 kernel: eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
Sep  3 11:03:55 ranjan404 hal.hotplug[3929]: timout(10000 ms) waiting for /bus/pci/slots
Sep  3 11:03:55 ranjan404 pci.agent[5847]: Bad PCI agent invocation
Sep  3 11:03:55 ranjan404 kernel: NET: Registered protocol family 10
Sep  3 11:03:55 ranjan404 kernel: Disabled Privacy Extensions on device c0313ce0(lo)
Sep  3 11:03:55 ranjan404 kernel: IPv6 over IPv4 tunneling driver
Sep  3 11:03:56 ranjan404 kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Sep  3 11:03:56 ranjan404 kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Sep  3 11:03:56 ranjan404 kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Sep  3 11:03:56 ranjan404 kernel: ACPI: Power Button (FF) [PWRF]
Sep  3 11:03:56 ranjan404 kernel: ACPI: Sleep Button (CM) [SLPB]
Sep  3 11:03:56 ranjan404 kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Sep  3 11:03:56 ranjan404 kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Sep  3 11:03:56 ranjan404 kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Sep  3 11:03:58 ranjan404 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Sep  3 11:03:58 ranjan404 kernel: apm: overridden by ACPI.
Sep  3 11:05:42 ranjan404 gconfd (akudewan-6912): starting (version 2.10.0), pid 6912 user 'akudewan'
Sep  3 11:05:42 ranjan404 gconfd (akudewan-6912): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep  3 11:05:42 ranjan404 gconfd (akudewan-6912): Resolved address "xml:readwrite:/home/akudewan/.gconf" to a writable configuration source at position 1
Sep  3 11:05:42 ranjan404 gconfd (akudewan-6912): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Sep  3 11:14:07 ranjan404 exiting on signal 15
Any ideas?
 
Old 09-11-2005, 01:19 AM   #6
akudewan
Member
 
Registered: Apr 2004
Location: India
Distribution: Ubuntu
Posts: 364

Original Poster
Rep: Reputation: 30
*bump*

Here's another question: Is there a command that will disable my eth0 connection? The only reason I have to poweroff my PC is because I need to stop downloading at 8:00am. After that, my isp starts billing me like hell.
 
Old 09-11-2005, 03:22 AM   #7
kb_ganesh
Member
 
Registered: Jun 2005
Posts: 42

Rep: Reputation: 15
i guess the solution to the last question of yours would be to write a shell script that kills the eth process and then make it run at 8 AM daily..am no shell scripter myself..some other linux guru can help you out (or check out the linux newbie guide's section on using cron to automate tasks..http://linux-newbie.sunsite.dk/)
 
Old 10-23-2005, 04:56 AM   #8
akudewan
Member
 
Registered: Apr 2004
Location: India
Distribution: Ubuntu
Posts: 364

Original Poster
Rep: Reputation: 30
Upgraded to Ubuntu Breezy, the problem seems to be solved
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
How to use 'poweroff' without being root? servnov Linux - Newbie 7 08-23-2005 07:12 AM
CD-ROM wont unmount unless logged in as root redsmoke Debian 3 12-13-2004 07:09 AM
Can't mount or unmount cdrom unless I'm root jsfueston Slackware - Installation 1 01-30-2004 04:05 PM
How to Unmount stuff without having to be Root? lostchild Mandriva 2 01-22-2004 07:57 PM
Can't unmount partition with DiskDrak, or umount bcmoney82 Mandriva 3 11-16-2003 05:15 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Ubuntu

All times are GMT -5. The time now is 11:21 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration