Okay, so I'm not completely new to linux, but I really don't understand what's happening here. I've got a fresh install of Kubuntu edgy, with an nVidia 6800GT card in the box. The motherboard is a Gigabyte GA-K8U-939 and the processor is an AMDx64 FX-55.
From what I've read, installing the nVidia binary drivers should be simple, just run:
sudo apt-get install nvidia-glx
And then:
sudo nvidia-xconfig
And restart X and off you go. Of course, it's not that simple. What happens to me is that I restart X, and my monitor goes into "no signal" mode. It's a Viewsonic VP2030b. I suppose at this point I should reveal too, that I have an old CRT that I'd like to set up as a second monitor, a Samsung SyncMaster 955DF, but at this point I'd be happy to have one monitor running at higher than 1024x768
Also, my purpose for installing the binary drivers is two fold: like everyone, I think it would be cool to get beryl running. Second, I can't get enough of Quake 4 rails. Both of these things I've done before (albeit on an ATI card), so that shouldn't be too hard.
Here's the xorg.conf that nvidia-xconfig generates:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Mon Oct 16 22:13:48 PDT 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV40 [GeForce 6800 GT]"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV40 [GeForce 6800 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Any suggestions? If I can post any more info that would be of use, let me know. Thanks in advance!
