Hi I am kinda new to linux in general
I am using ubuntu 8.10 with kernel 2.6.27-9-generic
I have just switched over to ubuntu from Vista.
ANT type of burning worked there, also can burn any type of media other than the current dvd+r dl disks I am currently using
same everything worked in vista
get:
Code:
from /var/log/messages
kernel: [ 169.841070] cdrom: This disc doesn't have any tracks I recognize!
kernel: [ 285.625265] ata2: link is slow to respond, please be patient (ready=0)
kernel: [ 290.608170] ata2: device not ready (errno=-16), forcing hardreset
kernel: [ 290.608197] ata2: soft resetting link
kernel: [ 295.764325] ata2: soft resetting link
kernel: [ 295.944654] ata2.00: configured for UDMA/33
kernel: [ 295.944707] ata2: EH complete
this is what I get when I start k3b from command line:
Code:
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 56
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 52
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET PERFORMANCE: 3
(K3bDevice::Device) /dev/scd0 : 8310 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::Device) /dev/scd0 : 3324 KB/s
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
(K3bDevice::HalConnection) lock queued for /org/freedesktop/Hal/devices/storage_model_DVD_RW_AD_7560A
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD_RW_AD_7560A
(K3bDevice::ScsiCommand) failed:
command: READ DVD STRUCTURE (ad)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 2c
ascq: 0
(K3bDevice::Device) /dev/scd0: READ DVD STRUCTURE length det failed
(K3bDevice::Device) Unable to read DVD structure for num of layers.
(K3bDevice::ScsiCommand) failed:
command: PREVENT ALLOW MEDIUM REMOVAL (1e)
errorcode: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0
(K3bDevice::ScsiCommand) failed:
command: READ DVD STRUCTURE (ad)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 2c
ascq: 0
(K3bDevice::Device) /dev/scd0: READ DVD STRUCTURE length det failed
(K3bDevice::ScsiCommand) failed:
command: READ DVD STRUCTURE (ad)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 2c
ascq: 0
(K3bDevice::Device) /dev/scd0: READ DVD STRUCTURE length det failed
DiskInfo:
Mediatype: DVD+R Dual Layer
Current Profile: DVD+R Dual Layer
Disk state: empty
Empty: 1
Rewritable: 0
Appendable: 0
Sessions: 0
Tracks: 0
Layers: 2
Capacity: 366:09:69 (LBA 1647744) (3374579712 Bytes)
Remaining size: 366:09:69 (LBA 1647744) (3374579712 Bytes)
Used Size: 00:00:00 (LBA 0) (0 Bytes)
(K3bDevice::ScsiCommand) failed:
command: START STOP UNIT (1b)
errorcode: 70
sense key: NOT READY (2)
asc: 4
ascq: 8
(K3bDevice::ScsiCommand) failed:
command: START STOP UNIT (1b)
errorcode: 70
sense key: NOT READY (2)
asc: 4
ascq: 8
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 56
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 52
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET PERFORMANCE: 3
(K3bDevice::Device) /dev/scd0 : 8310 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::Device) /dev/scd0 : 3324 KB/s
if anybody could give me some advice on where lese to look it would be greatly appreciated.
Thanks in advance!
