LinuxQuestions.org
Visit Jeremy's Blog.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Ubuntu
Reload this Page [SOLVED] After upgrading black screen and cannot use gui on ubuntu 13.10
User Name
Password
Ubuntu This forum is for the discussion of Ubuntu Linux.

Notices


Reply
  Search this Thread
Old 10-17-2013, 11:36 PM   #1
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Rep: Reputation: 0
After upgrading black screen and cannot use gui on ubuntu 13.10

After upgrading to 13.10 from 13.04. I get and error that says: "could not apply the stored configuration for monitors" right after I login. I can press ALt+CTl+F1 and access a terminal, but other than that no GUI. Any suggestions on where to start to find a workaround to this problem? is it just me or someone else is experience the same problem. I'm using my windows 7 boot (not my favorite) to communicate while someone gives me a hand. I thank you in advance.
- AMD Phemon X3 8450
- Nvidia Geforce 9100
 
Old 10-17-2013, 11:43 PM   #2
evo2
LQ Guru
 
Registered: Jan 2009
Location: Japan
Distribution: Mostly Debian and CentOS
Posts: 6,724

Rep: Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705
Hi,

did Ubuntu switch to mir in 13.10 as threatened, or did the miss their self imposed deadline? If it is still running X you should be able to get a working (if not optinal) gui by removing your xorg.conf. Eg
Code:
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.back
Evo2.
 
Old 10-17-2013, 11:48 PM   #3
wagscat123
Member
 
Registered: Jan 2009
Location: Maryland-Pennsylvania border, USA
Distribution: openSUSE 15.2/15.3, Tumbleweed, Kubuntu 18.04/21.04, macOS 10.15, antiX 19, and Linux Mint 19.3
Posts: 860
Blog Entries: 45

Rep: Reputation: 120Reputation: 120
It's still on X11. Mir wasn't ready yet and will not be in until 14.04 - so it is not related to Mir.
 
Old 10-18-2013, 12:15 AM   #4
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Original Poster
Rep: Reputation: 0
Evo, let me try your solution. I will report. Ubuntu was not ready for mir. Thanks for your fast response.
 
Old 10-18-2013, 12:39 AM   #5
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Original Poster
Rep: Reputation: 0
No such a file or directory.... am I missing something? Where is the xorg file locate it?
 
Old 10-18-2013, 01:01 AM   #6
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Original Poster
Rep: Reputation: 0
I did what evo suggested. I found the path to xorg.conf, but it did not work after login I get this:
"Could not apply the store configuration for monitors
None of the selected modes were compatible with the possible modes:
Trying modes for CRTC 82
CRTC 82: trying mode 1280x720@0Hz with output at 1600x900@50Hz (pass 0)
CRTC 82: trying mode 1024x720@61Hz with output at 1600x900@50Hz (pass 0)
"
and many more of those CRTC 82:, it is kind of difficult to type them all on a phone. But I still have the same problem. Anyone with another suggestion? Thanks.
 
Old 10-18-2013, 01:18 AM   #7
evo2
LQ Guru
 
Registered: Jan 2009
Location: Japan
Distribution: Mostly Debian and CentOS
Posts: 6,724

Rep: Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705
Hi,

ok, if you are really sure you moved that config out of the way, it must be reading the configuration from somewhere else. The /var/log/Xorg.0.log should tell you where it is reading the configuration from.

Evo2.
 
Old 10-18-2013, 02:56 AM   #8
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Original Poster
Rep: Reputation: 0
What exactly am I looking for?
I found this:
using system configuration directory "usr/share/X11/xorg.configuration.d"
(EE) Failed to load /usr/lib/xorg/modules/libglamoregl.so: /usr/lib/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
(EE) Failed to load module "glamoregl" (loader failed, 7)
(EE) Nvidia: Failed to load the Nvidia kernel module. Please check your system's kernel log for additional error messages.

What else do you need? Thanks.
 
Old 10-18-2013, 03:26 AM   #9
evo2
LQ Guru
 
Registered: Jan 2009
Location: Japan
Distribution: Mostly Debian and CentOS
Posts: 6,724

Rep: Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705Reputation: 1705
Hi,

ok we can now explicitly see it is failing to load both and X driver and kernel module. You need to try to disable X from trying to load them. Check the config files in the directory it mentions and also really confirm that you no longer have an /etc/X11/xorg.conf.

One this is disabled you should get a working X session and then you can proceed to getting the close nvidia drivers installed to get hardware acceleration.

Did you check the release notes for 13.04 for instructions related to this? Or am I being naive in assuming that Ubuntu produces proper release notes?

Evo2.
 
Old 10-18-2013, 11:54 AM   #10
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Original Poster
Rep: Reputation: 0
Hey,

I am going to need further assistance trying to disable xorg as u say, evo2. If you don't mind that is.
Where do I start?

Thank you for your help so far.
 
Old 10-18-2013, 01:22 PM   #11
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Original Poster
Rep: Reputation: 0
I would like to post the Xorg.0.log for you guys to see it. Does anyone know How to do this without a GUI?
 
Old 10-18-2013, 03:49 PM   #12
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Original Poster
Rep: Reputation: 0
update:
After some research I found people saying that it was a kernel error, so I went and reboot my pc with a 3.8.0.31-generic kernel and not 3.11 kernel. Now I can used Gui and It is working just fine. just got a error for nvidia-304 package. Do you know how to fix this issue or both? so, i can use 3.11 kernel and fix the nvidia-304 error?

Thanks
Last edited by AndresGuevara; 10-18-2013 at 04:15 PM. Reason: add log
 
Old 10-18-2013, 04:16 PM   #13
AndresGuevara
LQ Newbie
 
Registered: Dec 2006
Posts: 28

Original Poster
Rep: Reputation: 0
That's the new log. Do you know how to access the other one?


Code:
[    29.746] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    29.746] X Protocol Version 11, Revision 0
[    29.746] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    29.746] Current Operating System: Linux theunique-NP220AA-A2L-p6152f 3.8.0-31-generic #46-Ubuntu SMP Tue Sep 10 20:03:44 UTC 2013 x86_64
[    29.746] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-31-generic root=UUID=78b40104-59c0-4492-9204-62663daa4955 ro quiet splash
[    29.746] Build Date: 15 October 2013  09:23:37AM
[    29.746] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) 
[    29.746] Current version of pixman: 0.30.2
[    29.746] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    29.746] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    29.746] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 18 16:25:25 2013
[    29.848] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    29.849] (==) No Layout section.  Using the first Screen section.
[    29.849] (==) No screen section available. Using defaults.
[    29.849] (**) |-->Screen "Default Screen Section" (0)
[    29.849] (**) |   |-->Monitor "<default monitor>"
[    29.849] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    29.849] (==) Automatically adding devices
[    29.849] (==) Automatically enabling devices
[    29.849] (==) Automatically adding GPU devices
[    29.849] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    29.849] 	Entry deleted from font path.
[    29.849] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    29.849] 	Entry deleted from font path.
[    29.849] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    29.849] 	Entry deleted from font path.
[    29.849] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    29.849] 	Entry deleted from font path.
[    29.849] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    29.849] 	Entry deleted from font path.
[    29.849] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    29.849] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    29.849] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    29.849] (II) Loader magic: 0x7fe6ad85dd20
[    29.849] (II) Module ABI versions:
[    29.849] 	X.Org ANSI C Emulation: 0.4
[    29.849] 	X.Org Video Driver: 14.1
[    29.849] 	X.Org XInput driver : 19.1
[    29.849] 	X.Org Server Extension : 7.0
[    29.851] (--) PCI:*(0:2:0:0) 10de:0847:103c:2a81 rev 162, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, 0xe6000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[    29.851] (II) Open ACPI successful (/var/run/acpid.socket)
[    29.851] Initializing built-in extension Generic Event Extension
[    29.851] Initializing built-in extension SHAPE
[    29.851] Initializing built-in extension MIT-SHM
[    29.851] Initializing built-in extension XInputExtension
[    29.851] Initializing built-in extension XTEST
[    29.851] Initializing built-in extension BIG-REQUESTS
[    29.851] Initializing built-in extension SYNC
[    29.851] Initializing built-in extension XKEYBOARD
[    29.851] Initializing built-in extension XC-MISC
[    29.851] Initializing built-in extension SECURITY
[    29.851] Initializing built-in extension XINERAMA
[    29.851] Initializing built-in extension XFIXES
[    29.851] Initializing built-in extension RENDER
[    29.851] Initializing built-in extension RANDR
[    29.851] Initializing built-in extension COMPOSITE
[    29.851] Initializing built-in extension DAMAGE
[    29.851] Initializing built-in extension MIT-SCREEN-SAVER
[    29.851] Initializing built-in extension DOUBLE-BUFFER
[    29.851] Initializing built-in extension RECORD
[    29.851] Initializing built-in extension DPMS
[    29.851] Initializing built-in extension X-Resource
[    29.851] Initializing built-in extension XVideo
[    29.851] Initializing built-in extension XVideo-MotionCompensation
[    29.851] Initializing built-in extension SELinux
[    29.851] Initializing built-in extension XFree86-VidModeExtension
[    29.851] Initializing built-in extension XFree86-DGA
[    29.851] Initializing built-in extension XFree86-DRI
[    29.851] Initializing built-in extension DRI2
[    29.851] (II) "glx" will be loaded by default.
[    29.851] (WW) "xmir" is not to be loaded by default. Skipping.
[    29.851] (II) LoadModule: "dri2"
[    29.851] (II) Module "dri2" already built-in
[    29.851] (II) LoadModule: "glamoregl"
[    29.896] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    30.229] (EE) Failed to load /usr/lib/xorg/modules/libglamoregl.so: /usr/lib/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
[    30.229] (II) UnloadModule: "glamoregl"
[    30.229] (II) Unloading glamoregl
[    30.229] (EE) Failed to load module "glamoregl" (loader failed, 7)
[    30.229] (II) LoadModule: "glx"
[    30.229] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    30.808] (II) Module glx: vendor="NVIDIA Corporation"
[    30.808] 	compiled for 4.0.2, module version = 1.0.0
[    30.808] 	Module class: X.Org Server Extension
[    30.808] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:46:57 PDT 2013
[    30.808] Loading extension GLX
[    30.808] (==) Matched nvidia as autoconfigured driver 0
[    30.808] (==) Matched nouveau as autoconfigured driver 1
[    30.808] (==) Matched vesa as autoconfigured driver 2
[    30.808] (==) Matched modesetting as autoconfigured driver 3
[    30.808] (==) Matched fbdev as autoconfigured driver 4
[    30.808] (==) Assigned the driver to the xf86ConfigLayout
[    30.808] (II) LoadModule: "nvidia"
[    30.809] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    30.809] (II) Module nvidia: vendor="NVIDIA Corporation"
[    30.809] 	compiled for 4.0.2, module version = 1.0.0
[    30.809] 	Module class: X.Org Video Driver
[    30.809] (II) LoadModule: "nouveau"
[    30.810] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    30.827] (II) Module nouveau: vendor="X.Org Foundation"
[    30.827] 	compiled for 1.14.2.901, module version = 1.0.9
[    30.827] 	Module class: X.Org Video Driver
[    30.827] 	ABI class: X.Org Video Driver, version 14.1
[    30.827] (II) LoadModule: "vesa"
[    30.827] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    30.827] (II) Module vesa: vendor="X.Org Foundation"
[    30.827] 	compiled for 1.14.1, module version = 2.3.2
[    30.827] 	Module class: X.Org Video Driver
[    30.827] 	ABI class: X.Org Video Driver, version 14.1
[    30.827] (II) LoadModule: "modesetting"
[    30.827] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    30.828] (II) Module modesetting: vendor="X.Org Foundation"
[    30.828] 	compiled for 1.14.1, module version = 0.8.0
[    30.828] 	Module class: X.Org Video Driver
[    30.828] 	ABI class: X.Org Video Driver, version 14.1
[    30.828] (II) LoadModule: "fbdev"
[    30.828] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    30.828] (II) Module fbdev: vendor="X.Org Foundation"
[    30.828] 	compiled for 1.14.1, module version = 0.4.3
[    30.828] 	Module class: X.Org Video Driver
[    30.828] 	ABI class: X.Org Video Driver, version 14.1
[    30.828] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:28:14 PDT 2013
[    30.828] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    30.847] (II) NOUVEAU driver Date:   Wed Jul 31 10:51:03 2013 +1000
[    30.847] (II) NOUVEAU driver for NVIDIA chipset families :
[    30.847] 	RIVA TNT        (NV04)
[    30.847] 	RIVA TNT2       (NV05)
[    30.847] 	GeForce 256     (NV10)
[    30.847] 	GeForce 2       (NV11, NV15)
[    30.847] 	GeForce 4MX     (NV17, NV18)
[    30.847] 	GeForce 3       (NV20)
[    30.847] 	GeForce 4Ti     (NV25, NV28)
[    30.847] 	GeForce FX      (NV3x)
[    30.847] 	GeForce 6       (NV4x)
[    30.847] 	GeForce 7       (G7x)
[    30.847] 	GeForce 8       (G8x)
[    30.847] 	GeForce GTX 200 (NVA0)
[    30.847] 	GeForce GTX 400 (NVC0)
[    30.847] (II) VESA: driver for VESA chipsets: vesa
[    30.847] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    30.847] (II) FBDEV: driver for framebuffer: fbdev
[    30.847] (++) using VT number 7

[    30.848] (II) Loading sub module "fb"
[    30.848] (II) LoadModule: "fb"
[    30.848] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.849] (II) Module fb: vendor="X.Org Foundation"
[    30.849] 	compiled for 1.14.3, module version = 1.0.0
[    30.849] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    30.849] (II) Loading sub module "wfb"
[    30.849] (II) LoadModule: "wfb"
[    30.849] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    30.884] (II) Module wfb: vendor="X.Org Foundation"
[    30.885] 	compiled for 1.14.3, module version = 1.0.0
[    30.885] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    30.885] (II) Loading sub module "ramdac"
[    30.885] (II) LoadModule: "ramdac"
[    30.885] (II) Module "ramdac" already built-in
[    30.905] (WW) Falling back to old probe method for vesa
[    30.905] (WW) Falling back to old probe method for modesetting
[    30.905] (EE) open /dev/dri/card0: No such file or directory
[    30.905] (WW) Falling back to old probe method for fbdev
[    30.905] (II) Loading sub module "fbdevhw"
[    30.905] (II) LoadModule: "fbdevhw"
[    30.905] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    30.906] (II) Module fbdevhw: vendor="X.Org Foundation"
[    30.906] 	compiled for 1.14.3, module version = 0.0.2
[    30.906] 	ABI class: X.Org Video Driver, version 14.1
[    30.906] (EE) open /dev/fb0: No such file or directory
[    30.906] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    30.906] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    30.906] (==) NVIDIA(0): RGB weight 888
[    30.906] (==) NVIDIA(0): Default visual is TrueColor
[    30.906] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.906] (**) NVIDIA(0): Enabling 2D acceleration
[    31.492] (II) NVIDIA(GPU-0): Display (HP 2009 (DFP-0)) does not support NVIDIA 3D Vision
[    31.492] (II) NVIDIA(GPU-0):     stereo.
[    31.494] (II) NVIDIA(0): NVIDIA GPU GeForce 9100 (C77) at PCI:2:0:0 (GPU-0)
[    31.494] (--) NVIDIA(0): Memory: 524288 kBytes
[    31.494] (--) NVIDIA(0): VideoBIOS: 62.77.3c.00.00
[    31.494] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    31.496] (--) NVIDIA(0): Valid display device(s) on GeForce 9100 at PCI:2:0:0
[    31.496] (--) NVIDIA(0):     CRT-0
[    31.496] (--) NVIDIA(0):     HP 2009 (DFP-0) (connected)
[    31.496] (--) NVIDIA(0): CRT-0: 300.0 MHz maximum pixel clock
[    31.496] (--) NVIDIA(0): HP 2009 (DFP-0): 165.0 MHz maximum pixel clock
[    31.496] (--) NVIDIA(0): HP 2009 (DFP-0): Internal Single Link TMDS
[    31.496] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    31.496] (**) NVIDIA(0):     device HP 2009 (DFP-0) (Using EDID frequencies has been
[    31.496] (**) NVIDIA(0):     enabled on all display devices.)
[    31.497] (==) NVIDIA(0): 
[    31.497] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    31.497] (==) NVIDIA(0):     will be used as the requested mode.
[    31.497] (==) NVIDIA(0): 
[    31.497] (II) NVIDIA(0): Validated MetaModes:
[    31.497] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    31.497] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 900
[    31.519] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[    31.519] (--) NVIDIA(0):     option
[    31.519] (II) UnloadModule: "nouveau"
[    31.519] (II) Unloading nouveau
[    31.519] (II) UnloadModule: "vesa"
[    31.519] (II) Unloading vesa
[    31.519] (II) UnloadModule: "modesetting"
[    31.519] (II) Unloading modesetting
[    31.519] (II) UnloadModule: "fbdev"
[    31.519] (II) Unloading fbdev
[    31.519] (II) UnloadSubModule: "fbdevhw"
[    31.519] (II) Unloading fbdevhw
[    31.519] (--) Depth 24 pixmap format is 32 bpp
[    31.520] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    31.525] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    31.567] Loading extension NV-GLX
[    31.587] (==) NVIDIA(0): Disabling shared memory pixmaps
[    31.587] (==) NVIDIA(0): Backing store disabled
[    31.587] (==) NVIDIA(0): Silken mouse enabled
[    31.588] (==) NVIDIA(0): DPMS enabled
[    31.588] Loading extension NV-CONTROL
[    31.588] Loading extension XINERAMA
[    31.588] (II) Loading sub module "dri2"
[    31.588] (II) LoadModule: "dri2"
[    31.588] (II) Module "dri2" already built-in
[    31.588] (II) NVIDIA(0): [DRI2] Setup complete
[    31.588] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    31.588] (--) RandR disabled
[    31.594] (II) SELinux: Disabled on system
[    31.595] (II) Initializing extension GLX
[    31.643] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    31.646] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    31.646] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.646] (II) LoadModule: "evdev"
[    31.646] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.658] (II) Module evdev: vendor="X.Org Foundation"
[    31.658] 	compiled for 1.14.1, module version = 2.7.3
[    31.658] 	Module class: X.Org XInput Driver
[    31.658] 	ABI class: X.Org XInput driver, version 19.1
[    31.658] (II) Using input driver 'evdev' for 'Power Button'
[    31.658] (**) Power Button: always reports core events
[    31.658] (**) evdev: Power Button: Device: "/dev/input/event1"
[    31.658] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.658] (--) evdev: Power Button: Found keys
[    31.658] (II) evdev: Power Button: Configuring as keyboard
[    31.658] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    31.658] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.658] (**) Option "xkb_rules" "evdev"
[    31.658] (**) Option "xkb_model" "pc105"
[    31.658] (**) Option "xkb_layout" "us"
[    31.658] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    31.658] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    31.658] (II) Using input driver 'evdev' for 'Video Bus'
[    31.658] (**) Video Bus: always reports core events
[    31.659] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    31.659] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    31.659] (--) evdev: Video Bus: Found keys
[    31.659] (II) evdev: Video Bus: Configuring as keyboard
[    31.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input5/event5"
[    31.659] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    31.659] (**) Option "xkb_rules" "evdev"
[    31.659] (**) Option "xkb_model" "pc105"
[    31.659] (**) Option "xkb_layout" "us"
[    31.659] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    31.659] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.659] (II) Using input driver 'evdev' for 'Power Button'
[    31.659] (**) Power Button: always reports core events
[    31.659] (**) evdev: Power Button: Device: "/dev/input/event0"
[    31.659] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.659] (--) evdev: Power Button: Found keys
[    31.659] (II) evdev: Power Button: Configuring as keyboard
[    31.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    31.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    31.659] (**) Option "xkb_rules" "evdev"
[    31.659] (**) Option "xkb_model" "pc105"
[    31.659] (**) Option "xkb_layout" "us"
[    31.660] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event4)
[    31.660] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    31.660] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[    31.660] (**) USB OPTICAL MOUSE: always reports core events
[    31.660] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event4"
[    31.660] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521
[    31.660] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons
[    31.660] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[    31.660] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[    31.660] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[    31.660] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[    31.660] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[    31.660] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[    31.660] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.660] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input4/event4"
[    31.660] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 9)
[    31.660] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[    31.660] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[    31.660] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[    31.660] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    31.660] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[    31.661] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[    31.661] (II) No input driver specified, ignoring this device.
[    31.661] (II) This device may have been added with another device file.
[    31.661] (II) config/udev: Adding input device CHICONY HP USB Multimedia Keyboard (/dev/input/event2)
[    31.661] (**) CHICONY HP USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[    31.661] (II) Using input driver 'evdev' for 'CHICONY HP USB Multimedia Keyboard'
[    31.661] (**) CHICONY HP USB Multimedia Keyboard: always reports core events
[    31.661] (**) evdev: CHICONY HP USB Multimedia Keyboard: Device: "/dev/input/event2"
[    31.661] (--) evdev: CHICONY HP USB Multimedia Keyboard: Vendor 0x4f2 Product 0x841
[    31.661] (--) evdev: CHICONY HP USB Multimedia Keyboard: Found keys
[    31.661] (II) evdev: CHICONY HP USB Multimedia Keyboard: Configuring as keyboard
[    31.661] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input2/event2"
[    31.661] (II) XINPUT: Adding extended input device "CHICONY HP USB Multimedia Keyboard" (type: KEYBOARD, id 10)
[    31.661] (**) Option "xkb_rules" "evdev"
[    31.661] (**) Option "xkb_model" "pc105"
[    31.661] (**) Option "xkb_layout" "us"
[    31.662] (II) config/udev: Adding input device CHICONY HP USB Multimedia Keyboard (/dev/input/event3)
[    31.662] (**) CHICONY HP USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[    31.662] (II) Using input driver 'evdev' for 'CHICONY HP USB Multimedia Keyboard'
[    31.662] (**) CHICONY HP USB Multimedia Keyboard: always reports core events
[    31.662] (**) evdev: CHICONY HP USB Multimedia Keyboard: Device: "/dev/input/event3"
[    31.662] (--) evdev: CHICONY HP USB Multimedia Keyboard: Vendor 0x4f2 Product 0x841
[    31.662] (--) evdev: CHICONY HP USB Multimedia Keyboard: Found keys
[    31.662] (II) evdev: CHICONY HP USB Multimedia Keyboard: Configuring as keyboard
[    31.662] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1/input/input3/event3"
[    31.662] (II) XINPUT: Adding extended input device "CHICONY HP USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[    31.662] (**) Option "xkb_rules" "evdev"
[    31.662] (**) Option "xkb_model" "pc105"
[    31.662] (**) Option "xkb_layout" "us"
[    31.662] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event10)
[    31.662] (II) No input driver specified, ignoring this device.
[    31.662] (II) This device may have been added with another device file.
[    31.662] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event11)
[    31.662] (II) No input driver specified, ignoring this device.
[    31.662] (II) This device may have been added with another device file.
[    31.663] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event12)
[    31.663] (II) No input driver specified, ignoring this device.
[    31.663] (II) This device may have been added with another device file.
[    31.663] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event13)
[    31.663] (II) No input driver specified, ignoring this device.
[    31.663] (II) This device may have been added with another device file.
[    31.663] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[    31.663] (II) No input driver specified, ignoring this device.
[    31.663] (II) This device may have been added with another device file.
[    31.663] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event7)
[    31.663] (II) No input driver specified, ignoring this device.
[    31.663] (II) This device may have been added with another device file.
[    31.663] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event8)
[    31.663] (II) No input driver specified, ignoring this device.
[    31.663] (II) This device may have been added with another device file.
[    31.664] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9)
[    31.664] (II) No input driver specified, ignoring this device.
[    31.664] (II) This device may have been added with another device file.
[    32.866] (II) NVIDIA(GPU-0): Display (HP 2009 (DFP-0)) does not support NVIDIA 3D Vision
[    32.866] (II) NVIDIA(GPU-0):     stereo.
[    32.866] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.866] (**) NVIDIA(0):     device HP 2009 (DFP-0) (Using EDID frequencies has been
[    32.867] (**) NVIDIA(0):     enabled on all display devices.)
[    34.783] (II) NVIDIA(GPU-0): Display (HP 2009 (DFP-0)) does not support NVIDIA 3D Vision
[    34.783] (II) NVIDIA(GPU-0):     stereo.
[    34.783] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    34.783] (**) NVIDIA(0):     device HP 2009 (DFP-0) (Using EDID frequencies has been
[    34.783] (**) NVIDIA(0):     enabled on all display devices.)
[    48.204] (II) NVIDIA(GPU-0): Display (HP 2009 (DFP-0)) does not support NVIDIA 3D Vision
[    48.204] (II) NVIDIA(GPU-0):     stereo.
[    48.204] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    48.204] (**) NVIDIA(0):     device HP 2009 (DFP-0) (Using EDID frequencies has been
[    48.204] (**) NVIDIA(0):     enabled on all display devices.)
[    49.939] (II) NVIDIA(GPU-0): Display (HP 2009 (DFP-0)) does not support NVIDIA 3D Vision
[    49.939] (II) NVIDIA(GPU-0):     stereo.
[    49.939] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    49.939] (**) NVIDIA(0):     device HP 2009 (DFP-0) (Using EDID frequencies has been
[    49.939] (**) NVIDIA(0):     enabled on all display devices.)
[    50.457] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    51.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    56.481] (II) XKB: generating xkmfile /var/lib/xkb/server-CB537B66032B0DBE0AE956F537017A59DB020654.xkm
[    70.671] (II) NVIDIA(GPU-0): Display (HP 2009 (DFP-0)) does not support NVIDIA 3D Vision
[    70.671] (II) NVIDIA(GPU-0):     stereo.
[    70.671] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    70.671] (**) NVIDIA(0):     device HP 2009 (DFP-0) (Using EDID frequencies has been
[    70.671] (**) NVIDIA(0):     enabled on all display devices.)
[    77.845] (II) NVIDIA(GPU-0): Display (HP 2009 (DFP-0)) does not support NVIDIA 3D Vision
[    77.845] (II) NVIDIA(GPU-0):     stereo.
[    77.845] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    77.845] (**) NVIDIA(0):     device HP 2009 (DFP-0) (Using EDID frequencies has been
[    77.845] (**) NVIDIA(0):     enabled on all display devices.)
 
Old 11-26-2013, 05:42 PM   #14
ekenny
LQ Newbie
 
Registered: Nov 2013
Posts: 1

Rep: Reputation: Disabled
opencv
Had me baffled too for a few hours, then reinstalled every package on a pristine install and found the problem is:

opencv or nvidia-319-updates (could also be another type of nvidia driver)

check:

dpkg-query -l | grep nvidia

opencv installs nvidia-319-* drivers which knackered my Dell laptop. Certainly one to watch. Haven't had nvidia problems since the days of opensuse 9,10,11.

One possible fix is:

Ctrl-Alt-F1
login as a normal user...
dpkg-query -l | grep nvidia-319
sudo apt-get remove nvidia-319-updates nvidia-setting-319-updates
ps -ef | grep X
sudo kill -9 <process-number>

Hey presto nvidia gone and opencv unfortunately. I can see why opencv-2.3 is the default on Debian Stable.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Black screen after brief GUI interface on Ubuntu 10 ctobola Linux - Software 1 10-13-2011 03:25 PM
Screen goes black on booting into GUI anth0ny5 Linux - Software 2 03-29-2010 11:15 PM
Black screen after upgrading a PCLinuxOS HD-installation snoopydoo Mandriva 1 01-04-2006 03:29 PM
second screen is black (framebuffer and x11) after upgrading memory oddiofile Linux - Hardware 2 11-17-2005 06:54 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Ubuntu

All times are GMT -5. The time now is 05:38 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration