win32sux |
03-13-2009 03:13 PM |
Quote:
Originally Posted by Christastrophe
(Post 3474657)
Thanks again for your help, i found what you were talking about, I tried to edit it, but i have a couple questions. How do I start a session as administrator or main user? I tried to edit the code but was given an error message saying i didnt have permission.
|
You don't need to start a session with administrator privileges. That is never a good idea and should be avoided at all costs. Instead, just run your text editor with administrative privileges. For example, assuming you are using gedit, open terminal and issue this command: That will cause you to be prompted for your password and then you can use gedit with administrative privileges. Be very careful and make sure you make backups before changing any file.
Quote:
The other question was, where do i place these added lines in the code? There are many lines with question and #comments, I'm just uncertain of where to place it. Iver tried a few places i thought it might effect but im still running into permission issues.
|
You don't need to add any lines. They are already there. Just fine them and add/remove the comments to them. For example, on my 8.10 box, the file looks like this (I put the relevant lines in bold):
Code:
#
# Configuration file for the acpi-support package
#
#
# The acpi-support package is intended as "glue" to make special functions of
# laptops work. Specifically, it translates special function keys for some
# laptop models into actions or generic function key presses.
#
#
# Suspend/hibernate method
# ------------------------
#
# When gnome-power-manager or klaptopdaemon are running, acpi-support will
# translate the suspend and hibernate keys of laptops into special "suspend"
# and "hibernate" keys that these daemons handle.
#
# Only in situations where there is no gnome-power-manager or klaptopdaemon
# running, acpi-support needs to perform suspend/hibernate in some other way.
# There are several options for this. The options are:
#
# dbus-pm:
# Perform suspend and hibernate actions via a DBUS request to the power
# management daemon. This works for power management daemons that we don't
# know of. (For gnome-power-manager and klaptopdaemon this will do nothing,
# since those will be detected when they are running, and triggered using
# a virtual keypress.)
#
# dbus-hal:
# Perform suspend and hibernate actions via a DBUS request directly to HAL,
# bypassing any running power management daemons.
#
# pm-utils:
# Use pm-suspend and pm-hibernate to suspend and hibernate. (The dbus method
# normally results in this as well, but calls through dbus. Use this option
# only if you don't have dbus installed.)
#
# hibernate:
# Use the hibernate package to suspend and hibernate.
#
# acpi-support:
# Use the legacy built-in suspend/hibernate support. (DEPRECATED)
#
# none:
# Do not attempt to suspend/hibernate. Set SUSPEND_METHODS="none" to
# disable suspend/hibernate handling in acpi-support.
#
# If you specify dbus or pm-utils, the result will normally be the same as when
# you suspend from your desktop environment. If you specify "hibernate" or
# "acpi-support", be aware that this probably does not match what your desktop
# environment would do (unless you have managed to configure something so that
# the DBUS power management interfaces call the hibernate package).
#
#
# Please specify a space separated list of options. The recommended value is
# "dbus pm-utils"
#
SUSPEND_METHODS="dbus-pm dbus-hal pm-utils"
#
# LEGACY BUILT IN SUSPEND SUPPORT (DEPRECATED)
# --------------------------------------------
#
# These options only work for the "acpi-support" suspend method. This is NOT
# recommended, but is retained for backward compatibility reasons.
#
# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true
# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true
# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
ACPI_SLEEP_MODE=mem
# Add modules to this list to have them removed before suspend and reloaded
# on resume. An example would be MODULES="em8300 yenta_socket"
#
# Note that network cards and USB controllers will automatically be unloaded
# unless they're listed in MODULES_WHITELIST
MODULES=""
# Add modules to this list to leave them in the kernel over suspend/resume
MODULES_WHITELIST=""
# Should we save and restore state using the VESA BIOS Extensions?
SAVE_VBE_STATE=true
# The file that we use to save the vbestate
VBESTATE=/var/lib/acpi-support/vbestate
# Should we attempt to warm-boot the video hardware on resume?
POST_VIDEO=true
# Save and restore video state?
# SAVE_VIDEO_PCI_STATE=true
# Should we switch the screen off with DPMS on suspend?
USE_DPMS=true
# Use Radeontool to switch the screen off? Seems to be needed on some machines
# RADEON_LIGHT=true
# Uncomment the next line to switch away from X and back again after resume.
# This is needed for some hardware, but should be unnecessary on most.
# DOUBLE_CONSOLE_SWITCH=true
# Set the following to "platform" if you want to use ACPI to shut down
# your machine on hibernation
HIBERNATE_MODE=shutdown
# Comment this out to disable screen locking on resume
LOCK_SCREEN=true
# Uncomment this line to have DMA disabled before suspend and reenabled
# afterwards
# DISABLE_DMA=true
# Uncomment this line to attempt to reset the drive on resume. This seems
# to be needed for some Sonys
# RESET_DRIVE=true
# Add services to this list to stop them before suspend and restart them in
# the resume process.
STOP_SERVICES=""
# Restart Infra Red services on resume - off by default as it crashes some
# machines
RESTART_IRDA=false
# Switch to laptop-mode on battery power - off by default as it causes odd
# hangs on some machines. (Note: This is reported to cause breakage in
# Debian - see deb bug #425800. Leaving enabled for Ubuntu for now
# since presumably it's still valid here.)
ENABLE_LAPTOP_MODE=false
# Add to this list network interfaces that you don't want to be stopped
# during suspend (in fact any network interface whose name starts with
# a prefix given in this list is skipped)
SKIP_INTERFACES="dummy qemu"
# Note: to enable "laptop mode" (to spin down your hard drive for longer
# periods of time), install the laptop-mode-tools package and configure
# it in /etc/laptop-mode/laptop-mode.conf.
To make the changes which I made when I was on 7.10, I would make the file look like this:
Code:
#
# Configuration file for the acpi-support package
#
#
# The acpi-support package is intended as "glue" to make special functions of
# laptops work. Specifically, it translates special function keys for some
# laptop models into actions or generic function key presses.
#
#
# Suspend/hibernate method
# ------------------------
#
# When gnome-power-manager or klaptopdaemon are running, acpi-support will
# translate the suspend and hibernate keys of laptops into special "suspend"
# and "hibernate" keys that these daemons handle.
#
# Only in situations where there is no gnome-power-manager or klaptopdaemon
# running, acpi-support needs to perform suspend/hibernate in some other way.
# There are several options for this. The options are:
#
# dbus-pm:
# Perform suspend and hibernate actions via a DBUS request to the power
# management daemon. This works for power management daemons that we don't
# know of. (For gnome-power-manager and klaptopdaemon this will do nothing,
# since those will be detected when they are running, and triggered using
# a virtual keypress.)
#
# dbus-hal:
# Perform suspend and hibernate actions via a DBUS request directly to HAL,
# bypassing any running power management daemons.
#
# pm-utils:
# Use pm-suspend and pm-hibernate to suspend and hibernate. (The dbus method
# normally results in this as well, but calls through dbus. Use this option
# only if you don't have dbus installed.)
#
# hibernate:
# Use the hibernate package to suspend and hibernate.
#
# acpi-support:
# Use the legacy built-in suspend/hibernate support. (DEPRECATED)
#
# none:
# Do not attempt to suspend/hibernate. Set SUSPEND_METHODS="none" to
# disable suspend/hibernate handling in acpi-support.
#
# If you specify dbus or pm-utils, the result will normally be the same as when
# you suspend from your desktop environment. If you specify "hibernate" or
# "acpi-support", be aware that this probably does not match what your desktop
# environment would do (unless you have managed to configure something so that
# the DBUS power management interfaces call the hibernate package).
#
#
# Please specify a space separated list of options. The recommended value is
# "dbus pm-utils"
#
SUSPEND_METHODS="dbus-pm dbus-hal pm-utils"
#
# LEGACY BUILT IN SUSPEND SUPPORT (DEPRECATED)
# --------------------------------------------
#
# These options only work for the "acpi-support" suspend method. This is NOT
# recommended, but is retained for backward compatibility reasons.
#
# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true
# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true
# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
ACPI_SLEEP_MODE=mem
# Add modules to this list to have them removed before suspend and reloaded
# on resume. An example would be MODULES="em8300 yenta_socket"
#
# Note that network cards and USB controllers will automatically be unloaded
# unless they're listed in MODULES_WHITELIST
MODULES=""
# Add modules to this list to leave them in the kernel over suspend/resume
MODULES_WHITELIST=""
# Should we save and restore state using the VESA BIOS Extensions?
#SAVE_VBE_STATE=true
# The file that we use to save the vbestate
#VBESTATE=/var/lib/acpi-support/vbestate
# Should we attempt to warm-boot the video hardware on resume?
#POST_VIDEO=true
# Save and restore video state?
SAVE_VIDEO_PCI_STATE=true
# Should we switch the screen off with DPMS on suspend?
USE_DPMS=true
# Use Radeontool to switch the screen off? Seems to be needed on some machines
# RADEON_LIGHT=true
# Uncomment the next line to switch away from X and back again after resume.
# This is needed for some hardware, but should be unnecessary on most.
# DOUBLE_CONSOLE_SWITCH=true
# Set the following to "platform" if you want to use ACPI to shut down
# your machine on hibernation
HIBERNATE_MODE=shutdown
# Comment this out to disable screen locking on resume
LOCK_SCREEN=true
# Uncomment this line to have DMA disabled before suspend and reenabled
# afterwards
# DISABLE_DMA=true
# Uncomment this line to attempt to reset the drive on resume. This seems
# to be needed for some Sonys
# RESET_DRIVE=true
# Add services to this list to stop them before suspend and restart them in
# the resume process.
STOP_SERVICES=""
# Restart Infra Red services on resume - off by default as it crashes some
# machines
RESTART_IRDA=false
# Switch to laptop-mode on battery power - off by default as it causes odd
# hangs on some machines. (Note: This is reported to cause breakage in
# Debian - see deb bug #425800. Leaving enabled for Ubuntu for now
# since presumably it's still valid here.)
ENABLE_LAPTOP_MODE=false
# Add to this list network interfaces that you don't want to be stopped
# during suspend (in fact any network interface whose name starts with
# a prefix given in this list is skipped)
SKIP_INTERFACES="dummy qemu"
# Note: to enable "laptop mode" (to spin down your hard drive for longer
# periods of time), install the laptop-mode-tools package and configure
# it in /etc/laptop-mode/laptop-mode.conf.
Then I would reboot (not sure if it's necessary in this case, but it doesn't hurt anyway) and test to see if it made any difference. If not, then I would change the file back to the way it was before, either by manually editing it or by restoring a backup copy.
Quote:
Also I think my video card has a good deal to do with my problem, how can i find the exact model/type of ati x1250 i have through ubuntu....I think upgrading the card/driver will help.
|
Usually you can get this information with a command like: Ubuntu has a page for helping you get proprietary ATI drivers going here.
|