-   SUSE / openSUSE (
-   -   TASCAM US-122 SUSE10 x86_64 (

lrstreets 04-01-2006 06:20 AM

TASCAM US-122 SUSE10 x86_64

I just installed SUSE10 x86_64 on my AMD64, and I'm having problems getting my Tascam US-122 to be recognized by some audio applications. Specifically, after following the instructions at langerland dot de /linux/usx2y/install.html
the device's power indicator is illuminated, and YaST recognizes the device, and lists it as installed. Further, the YaST volume test even outputs audio AND some applications (including kgolf, Battle of Survival, and other games, etc.) successfully output audio. Unfortunately, no media players (those attempted include amarok, kaffeine, totem, xine) nor most other applications recognize the us-122. For example, when starting qjackctl, the following dialog is displayed:

"No sound card available or sound support is not configured yet. However, the application uses or requires sound support"

...and attempting to start jackd results in the following messages:

registered builtin port type 32 bit float mono audio
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
new client: alsa_pcm, id = 1 type 1 @ 0x51dd80 fd = -1
apparent rate = 48000
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|hwmon|hwmeter|-|16bit
control device hw:0
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
new buffer size 1024
JACK: unable to mlock() port buffers: Cannot allocate memory
registered port alsa_pcm:capture_1, offset = 4096
registered port alsa_pcm:capture_2, offset = 8192
registered port alsa_pcm:playback_1, offset = 0
registered port alsa_pcm:playback_2, offset = 0
++ jack_rechain_graph():
client alsa_pcm: internal client, execution_order=0.
-- jack_rechain_graph()
jack_create_thread: error -1 switching current thread to rt for inheritance: Unknown error 18446744073709551615
cannot start watchdog thread
cannot load driver module alsa
06:18:18.017 JACK was stopped successfully.
06:18:20.059 Could not connect to JACK server as client.

I've tried lots of stuff to try and get it working, without luck. Coding stinks without tunes.

Thanks in advance

All times are GMT -5. The time now is 12:01 PM.