LinuxQuestions.org - smbfs problem in suse 8.2

I get the following two messages when logging into Suse 8.2

Mount SMB file system unused
Skipped services in runlevel 5: smbfs

Can anyone tell me how to fix these errors?
Here is the entire boot log

Thanks.

nspecting /boot/System.map-2.4.20-4GB
Loaded 20952 symbols from /boot/System.map-2.4.20-4GB.
Symbols match kernel version 2.4.20.
Loaded 132 symbols from 9 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.20-4GB (root@Pentium.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Mon Mar 17 17:54:44 UTC 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000d0000 - 00000000000d6000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
<4> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
<4> BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<4>Scanning bios EBDA for MXT signature
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 AMI ) @ 0x000faa10
<6>ACPI: RSDT (v001 AMIINT AMIINI09 00000.00016) @ 0x1fff0000
<6>ACPI: FADT (v001 AMIINT AMIINI09 00000.00017) @ 0x1fff0030
<6>ACPI: MADT (v001 AMIINT AMIINI09 00000.00017) @ 0x1fff00c0
<6>ACPI: DSDT (v001 SiS 645 00000.04096) @ 0x00000000
<5>ACPI: BIOS passes blacklist
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hda3 vga=0x31a hdc=ide-scsi hdclun=0 splash=silent splash=silent
<6>ide_setup: hdc=ide-scsi
<6>ide_setup: hdclun=0
<6>bootsplash: silent mode.
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>Detected 2399.754 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 4784.12 BogoMIPS
<6>Memory: 514300k/524224k available (1569k kernel code, 9536k reserved, 574k data, 160k init, 0k highmem)
<6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<4>CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20030228
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S3 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>mxt_scan_bios: enter
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 32764
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xe0814000, size 65536k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:e6d0
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture.... silenjpeg size 43799 bytes, found (1280x1024, 32818 bytes, v3).
<6>Got silent jpeg.
<6>Got silent jpeg.
<4>Console: switching to colour frame buffer device 148x51
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>SIS5513: IDE controller at PCI slot 00:02.5
<6>SIS5513: chipset revision 0
<6>SIS5513: not 100%% native mode: will probe irqs later
<4>SiS651 ATA 133 controller
<6> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: ST340016A, ATA DISK drive
<4>hdb: IBM-DJNA-371350, ATA DISK drive
<4>blk: queue c03ac0c0, I/O limit 4095Mb (mask 0xffffffff)
<4>blk: queue c03ac214, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: HL-DT-ST RW/DVD GCC-4320B, ATAPI CD/DVD-ROM drive
<4>hdd: ATAPI 50X CDROM, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<4>hda: host protected area => 1
<6>hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
<4>hdb: attached ide-disk driver.
<4>hdb: host protected area => 1
<6>hdb: 26520480 sectors (13578 MB) w/1966KiB Cache, CHS=1650/255/63, UDMA(33)
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2 hda3
<6> hdb: hdb1 hdb2 < hdb5 >
<4>ide-floppy driver 0.99.newide
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 498k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 160k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
<6>Adding Swap: 522104k swap-space (priority 42)
<4>MSDOS FS: IO charset iso8859-1
<4>MSDOS FS: IO charset iso8859-1
<4>hdd: attached ide-cdrom driver.
<4>hdd: ATAPI 48X CD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>hdc: attached ide-scsi driver.
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: HL-DT-ST Model: RW/DVD GCC-4320B Rev: 1.02
<4> Type: CD-ROM ANSI SCSI revision: 02
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sat Mar 19 12:27:23 2005

Configuring serial ports...

ttyS0 at 0x03f8 (irq = 4) is a 16550A

ttyS1 at 0x02f8 (irq = 3) is a 16550A

modprobe: modprobe: Can't locate module char-major-212

Configured serial ports

doneRun file system check on root for LVM activation

doneRemounting root file system (/) read/write for vgscan...

Scanning for LVM volume groups...

vgscan -- reading all physical volumes (this may take a while...)

vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created

vgscan -- WARNING: This program does not do a VGDA backup of your volume group

Activating LVM volume groups...

vgchange -- no volume groups found

done

Activating swap-devices in /etc/fstab...

doneChecking file systems...

fsck 1.28 (31-Aug-2002)

Reiserfs super block in block 16 on 0x303 of format 3.6 with standard journal

Blocks (total/free): 9381960/7653195 by 4096 bytes

Filesystem is clean

doneMounting local file systems...

proc on /proc type proc (rw)

devpts on /dev/pts type devpts (rw,mode=0620,gid=5)

/dev/hda2 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437)

/dev/hdb1 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437)

doneLoading required kernel modules

doneSetting up IDE DMA mode

/dev/hdc:

setting using_dma to 1 (on)

using_dma = 1 (on)

done

Restore device permissions
done

Activating remaining swap-devices in /etc/fstab...

doneMounting shared memory FS on /dev/shm
done

Setting up the CMOS clock
done

Setting up linker cache (/etc/ld.so.cache) using ldconfig
done

Setting up timezone data
done

Setting up hostname 'linux'
done

Setting up loopback interface
done

find: /tmp/ssh-*: No such file or directory

Enabling syn flood protection
done

Disabling IP forwarding
done

Creating /var/log/boot.msg

done<notice>killproc: kill(29,29)
Running /etc/init.d/boot.local

done
Boot logging started on /dev/tty1(/dev/console) at Sat Mar 19 11:27:30 2005

Master Resource Control: previous runlevel: N, switching to runlevel:
5

Initializing random number generator
done

<notice>killproc: kill(29,3)

INIT: Entering runlevel: 5

<notice>/etc/init.d/rc5.d/S01isdn start
<notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0
<notice>/etc/init.d/rc5.d/S01random start
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network interfaces:

lo
done

eth0 (DHCP) <notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -H -D -N -t 999999 -h linux eth0 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh OLDPWD=/etc/sysconfig/network progress=19 INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=148 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/etc/sysconfig/network PREVLEVEL=N LINES=51 HOME=/ SHLVL=4 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/dhcpcd ]
<notice>pidofproc: dhcpcd 735
. IP/Netmask: 192.168.0.200 / 255.255.255.0
done

Starting syslog services<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06syslog start
<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>
done

Starting hotplugging services [ ieee1394startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/klogd ]
<notice>'/etc/init.d/rc5.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S07hotplug start
net pci usb ........ ]
done

<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S08resmgr start
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/resmgrd ]

done

Starting RPC portmap daemon<notice>'/etc/init.d/rc5.d/S08resmgr start' exits with status 0
<notice>/etc/init.d/rc5.d/S09portmap start
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=23 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/portmap ]

done

<notice>'/etc/init.d/rc5.d/S09portmap start' exits with status 0
Mount SMB File System
unused

<notice>/etc/init.d/rc5.d/S09smbfs start
<notice>'/etc/init.d/rc5.d/S09smbfs start' exits with status 6
<notice>/etc/init.d/rc5.d/S09splash_early start
<notice>'/etc/init.d/rc5.d/S09splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S13alsasound start
Starting sound driver: cmipci
done

Restoring the previous sound setting
done

<notice>'/etc/init.d/rc5.d/S13alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S13cups start
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]

done

<notice>'/etc/init.d/rc5.d/S13cups start' exits with status 0
<notice>/etc/init.d/rc5.d/S13fbset start
<notice>'/etc/init.d/rc5.d/S13fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S13rpmconfigcheck start
Searching for unresolved configuration files
done

Please check the following files (see /var/adm/rpmconfigcheck):

/opt/OpenOffice.org/share/psprint/psprint.conf.rpmsave

<notice>'/etc/init.d/rc5.d/S13rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc5.d/S13sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=30 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]

done

<notice>'/etc/init.d/rc5.d/S13sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S14kbd start
Loading keymap azerty/fr-latin1.map.gz

doneLoading compose table latin1.add
done

Loading console font lat1-16.psfu

^G
doneLoading screenmap none

doneSetting up console ttys

done<notice>'/etc/init.d/rc5.d/S14kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S14postfix start
Starting mail service (Postfix)^G
done

Starting service at daemon<notice>'/etc/init.d/rc5.d/S14postfix start' exits with status 0
<notice>/etc/init.d/rc5.d/S14splash start
<notice>'/etc/init.d/rc5.d/S14splash start' exits with status 0
<notice>/etc/init.d/rc5.d/S15atd start

done

Starting CRON daemon<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=34 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
<notice>'/etc/init.d/rc5.d/S15atd start' exits with status 0
<notice>/etc/init.d/rc5.d/S15cron start
<notice>
done

startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>'/etc/init.d/rc5.d/S15cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S15hwscan start
Starting hardware scan on boot^G<notice>'/etc/init.d/rc5.d/S15hwscan start' exits with status 0
<notice>/etc/init.d/rc5.d/S15nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]

done

<notice>'/etc/init.d/rc5.d/S15nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S16splash_late start
<notice>'/etc/init.d/rc5.d/S16splash_late start' exits with status 0
<notice>/etc/init.d/rc5.d/S16xdm start
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=39 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE=POSIX PWD=/ LANG=en_US PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 no_proxy=localhost RC_LC_COLLATE=POSIX WINDOWMANAGER=/usr/X11R6/bin/kde PRINTER=lp RC_LANG=en_US LC_CTYPE=en_US splash=silent sscripts=38 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]

done

Master Resource Control: runlevel 5 has been
reached

Skipped services in runlevel 5: smbfs

<notice>'/etc/init.d/rc5.d/S16xdm start' exits with status 0
<notice>killproc: kill(585,3)