NVidia Driver problem.
:newbie: I was working through the Jem Report on my SuSE 10.1, {Ge Force 3 Card}, using the Gnome desktop. I have both Gnome & KDE Desktops installed & both working OK.
All went well with the Jem Report instructions, until I installed the NVidia driver, using instuctions found on the NVidia website, ie use YAST to find & install - X11-video-nvidia & also nvidia-gfx-kmp-default. I did this successfully but on reeboot the command line screen came up not the GUI. I can log on OK but I don't know how to get to the GUI screen from there. Can anyone help please. Should I uninstall this driver, if so how. NVidia gave these instructions, specificaly for SuSE 10.1, where did I go wrong? :confused: |
I'm not familiar with the Jem Report so I don't know what, exactly, you did to your system. But, did you try startx from the CLI?
|
To start X, enter the command
Code:
startx |
I had a Similar problem, couldn't get "Sysinfo" (because of a warning wich was saying that nvidia-gfx-kmp-default couldn't be installed), so, i downloaded and ran the Nvidia-***-.run, did "Sax2 -r", configured it, and that's it; 3D activated.
|
When you get to login, log in as root then:
init 3 tiny-nvidia-installer --uninstall tiny-nvidia-installer --update .....follow instructions onscreen sax2 (change frequencies and resolution to suit your monitor) init 5 If the kernel is updated later, you'll have to do this again. |
NVidia Driver
Thanks all.
I tried startx, this resulted in almost a full screen of info, basicaly it said:- Warning (EE) error, (NI) not implimented (??) unknown Log File "/var/log/xorg.o.log Using config file"/etc/x11/org.conf Fatal module nvidia not found Fatal server error No screens found Then further down the screen:- 2 screens found but not suitable. As I said there was lots more but I can't type it all. I tried init 3, then followed your "tiny-nvidia-installer--uninstall" instructions, this resulted in :- command not found. Does this clarify at all ? If I download the nvidia driver as suggested, how do I install it from the CLI. Thanks. |
What do the lines in this file /var/log/xorg.o.log that are preceded with (EE) say? I'd bet that /etc/X11/xorg.conf has something similar to the following in the "Device" section
Code:
Identifier "Card0" |
NVIDIA and suse 10.1
Quote:
init 3 You are then in console. Log in as "root" with your root password. Then cd to the location of the downloaded "NVIDIA driver...run" and type: sh <NVIDIAdreverName>.run and follow instructions on the screen. However, note that you have to have gcc installed and the package with kernel source. Read carefully instructions on the screen. I and an old foggie and newbie in Linux, but succeeded to install the NVIDIA driver OK. The trouble I have is that the screen display is not centrally located on my LCD screen and the Yast GUI option to adjust the location is inoporative. (I did not use the "tiny-drive" at all as its latest version, installed after the NVIDIA driver, stopped the NVIDIA driver in its tracks.) Are you confused? I know that I would be.. Regards, really old Al. |
Do you still have the "nvidia*****.run file? Run it again using the --uninstall option, then run sax2. That should hopefully restore the old driver. Reboot. If it still goes to CLI, try startx.
If that works, open yast software management and search for nvidia. One of the selections should be tiny-nvidia-installer, make sure that is installed. After that, all being well, make sure you are connected to the internet then hit ctrl/alt/f1, which should take you back to CLI. Then follow my previous instructions. |
NVidia Driver problem
Thank you, Sp1t. I am impressed by your knowledge and willingness to help.
Yes, I still do have NVIDIA-Linux-x86-1.0-8776-pkg1.run driver (I should call it NVIDIA-xxx.run for short). However, my system was not functioning properly with the old driver. With the old driver I had flickering of the screen and resolution could not be better than 1024x768. So the attempt to restore it back does not seem attractive. I have partitioned my hda into many partitions (hda1 to hda14 with hda1 Win system and hda2 with Win data on Fat32; two other partitions are reasonably large with Reiser FS and are used for data that is shared between all suse Linux installations. Oh, and one small partition, hda14 is the boot partition for grub. Other partitions are for / of several Linux installations.) So I am ready and willing to install another suse10.1 and do some experimentation with it. As I have had some difficulty with NVIDIA with every suse installation, I would love to resolve it for suse 10.1. As I do think you know NVIDIA and suse10.1, I would like to ask you what is the purpose of tiny-nvidia-installer ? You see, I did have to install the NVIDIA-xxx.run twice. After the first installation, it worked fine, though it was "off-centre" and would not respond to attempts to move it with sax2 invoked via Yast. Then I installed tiny-nvidia-something. I am not sure what that "something" was, as I don't really remember, but I think it was the "tiny-nvidia-installer". That screwed up the system to the pre-installation of NVIDIA-xxx.run state. So I installed the NVIDIA-xxx.run the second time. PC now runs with 1280x1024 resolution, but off centre. I think that the install and reinstall did not do much good to the system, so I intend to try NVIDIA installation with a fresh install of suse10.1. Thanks again for your advice. I would appreciate to hear about the purpose and the proper use of the "tiny-nvidia-installer" OldAl. |
As is suse's want, they do a lot with linux in their own way, and sod the way that the rest of the linux community wants to do it. tiny-nvidia-installer just does what it says - it downloads the latest driver from NVidia and installs it. I've tried downloading the nvidia-****.run before, but couldn't get it to work with suse (or slack for that matter) but whenever I've used tiny (three machines, three different cards now) it works perfectly.
I would give the instructions in my previous a try - the --uninstall option works on tiny too, so you could always remove it and go back to reinstall your original driver if it doesn't work. I don't know a great deal about Suse, but this is one area I had a lot of trouble with, and researched a lot until I got this solution. |
Thank you again Sp1t. I have freshly installed suse 10.1 and will test the tiny-nvidia-installer RSN.
I am writing from this new installation on a flickering screen. Ah, suse and NVIDIA is not the greatest combination. Thanks again, OldAl. |
the command is:-
tint-nvidia-installer --update NB - note the space after installer |
I use SuSE 10.1 and a NVIDIA 6600gt card. I have had no problems. I am currently running 8776 drivers. What card are you using and do you have a 64 or 32 bit CPU? If you have a 64 bit make sure you use the AMD64/EM64 drivers.
|
I am using Suse 10.1 on a AMD Athlon64 X2 and MSI K9NGM mobo with nVidia Geforce 6100/nForce410
I first tried to install the nVidia driver with Yast, but that did not work. So I first started to install the nVidia Linux AMD64/EM64T Version: 1.0-8776 run package from init3. But that hung on the installer screen. From the NV forum I got the hint to try the newest (beta) version via the archive link NVIDIA Quadro Plex Driver Linux x64 (AMD64/EM64T) Version: 1.0-9626 Operating System: Linux AMD64/EM64T Release Date: October 13, 2006 This installed without any problem and I have a splendid high res desktop on my Sony GDM-F520 21" monitor running at 1280x1024 / 85Hz and 16 million colors on the mobo's internal graphic chip. |
Quote:
tiny-nvidia-installer --update (NOT tint-etc.) OldAl |
Quote:
My video card is: NVIDIA GeForce 4 MX 440 My monitor is 17" LCD: BNQ BENQ FP 731 Mobo is Gigabyte P4 Titan 667. CPU: Pentium 4 - 2.4 GHz. (32 bit) (My next PC will be an Athlon). I have some "real" work to do, so I fell back to SuSE 10.0, which purrs along without a hitch. The monitor happily displays 1280x1024 pixels with 24 bit colours. I regret to say, that my sad experience is that suse 10.1 is excellent for experimenting with the OS. It is clear enough that the system is in a state of transition. Whilst I do enjoy fiddling with it, I resent not being able to easily configure the NVIDIA driver. The tiny-nvidia-installer had disappointed me once again. Nice to hear that some people have had success - I salute you all! OldAl |
Thanks for the help, I have not had time to try things yet, but I will, & get back. Thanks.
|
All times are GMT -5. The time now is 02:47 PM. |