| slufoot80 |
09-19-2012 11:29 AM |
ssh from solaris 9 with a bash shell of 2.0 to suse 3.2 bash shell
When I ssh from one server to another it gives me the password prompt and I enter it but then it just sits there and hangs, below is the output of the problem
__________________________________________________________
Code:
sftp -vv fnowicki@10.2.10.26
Connecting to 10.2.10.26...
debug1: SSH args "ssh -oProtocol = 2 -s -oForwardAgent = no -oForwardX11 = no -l fnowicki -v -v 10.2.10.26 sftp"
SSH Version Sun_SSH_1.0, protocol versions 1.5/2.0.
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: ssh_connect: getuid 0 geteuid 0 anon 0
debug1: Connecting to 10.2.10.26 [10.2.10.26] port 22.
debug1: Allocated local port 1021.
debug1: Connection established.
debug1: Bad RSA1 key file //.ssh/id_rsa.
debug1: identity file //.ssh/id_rsa type 3
debug1: identity file //.ssh/id_dsa type 3
debug1: Remote protocol version 2.0, remote software version mod_sftp/0.9.8
debug1: no match: mod_sftp/0.9.8
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-Sun_SSH_1.0
debug1: sent kexinit: diffie-hellman-group1-sha1
debug1: sent kexinit: ssh-rsa,ssh-dss
debug1: sent kexinit: aes128-cbc,blowfish-cbc,3des-cbc,rijndael128-cbc
debug1: sent kexinit: aes128-cbc,blowfish-cbc,3des-cbc,rijndael128-cbc
debug1: sent kexinit: hmac-sha1,hmac-md5
debug1: sent kexinit: hmac-sha1,hmac-md5
debug1: sent kexinit: none
debug1: sent kexinit: none
debug1: sent kexinit:
debug1: sent kexinit:
debug1: send KEXINIT
debug1: done
debug1: wait KEXINIT
debug1: got kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1,rsa1024-sha1
debug1: got kexinit: ssh-rsa,ssh-dss
debug1: got kexinit: aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,blowfish-ctr,blowfish-cbc,cast128-cbc,arcfour256,arcfour128,3des-ctr,3des-cbc
debug1: got kexinit: aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,blowfish-ctr,blowfish-cbc,cast128-cbc,arcfour256,arcfour128,3des-ctr,3des-cbc
debug1: got kexinit: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160
debug1: got kexinit: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160
debug1: got kexinit: zlib@openssh.com,zlib,none
debug1: got kexinit: zlib@openssh.com,zlib,none
debug1: got kexinit:
debug1: got kexinit:
debug1: first kex follow: 0
debug1: reserved: 0
debug1: done
debug2: mac_init: found hmac-sha1
debug1: kex: server->client unable to decide common locale
debug1: kex: server->client aes128-cbc hmac-sha1 none
debug2: mac_init: found hmac-sha1
debug1: kex: client->server unable to decide common locale
debug1: kex: client->server aes128-cbc hmac-sha1 none
debug1: Sending SSH2_MSG_KEXDH_INIT.
debug1: bits set: 495/1024
debug1: Wait SSH2_MSG_KEXDH_REPLY.
debug1: Got SSH2_MSG_KEXDH_REPLY.
debug1: Host '10.2.10.26' is known and matches the RSA host key.
debug1: Found key in //.ssh/known_hosts:29
debug1: bits set: 518/1024
debug1: ssh_rsa_verify: signature correct
debug1: Wait SSH2_MSG_NEWKEYS.
debug1: GOT SSH2_MSG_NEWKEYS.
debug1: send SSH2_MSG_NEWKEYS.
debug1: done: send SSH2_MSG_NEWKEYS.
debug1: done: KEX2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue: password
debug1: next auth method to try is password
fnowicki@10.2.10.26's password:
debug2: we sent a password packet, wait for reply
debug1: ssh-userauth2 successfull: method password
debug1: fd 6 setting O_NONBLOCK
debug1: fd 7 IS O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug2: callback start
debug1: client_init id 0 arg 0
debug1: Sending subsystem: sftp
debug2: callback done
debug1: channel 0: open confirm rwindow -1 rmax 32768
|
