I have preapared raid-1 (mirror) on my Solaris 10.
2 disks have been used - (disk0) c0t0d0 and (disk1) c0t1d0.
The /etc/vfstab looks like this now:
Code:
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
/dev/md/dsk/d4 /dev/md/rdsk/d4 /export/home ufs 2 yes -
/dev/md/dsk/d1 /dev/md/rdsk/d1 /opt ufs 2 yes -
/dev/md/dsk/d3 /dev/md/rdsk/d3 /opt2 ufs 2 yes -
metastat shows all disks are OK.
Now I need to do a test. I want to remove disk c0t1d0 (disk1) and plug on this place compltly new disk. (not formated and with no slices but exactelly this same vendor and geometry!).
Question is:
what to do to make new disk take role of previous disk c0t1d0 (disk1) ?
Is there any procedure ?