Hello,

Cluster with two nodes and two 3320 storages.
when I execute sccli I get

sccli: no manageable devices found

I tried sccli -d sccli -d /dev/es/ses0 and 1

sccli -d /dev/es/ses1
sccli: specified device not found or not valid: /dev/es/ses1
sccli: /dev/es/ses1: cannot find unambiguous enclosure match for disk

With format I can see all disks, also cfgadm -al says

Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t1d0 disk connected configured unknown
c0::dsk/c0t2d0 disk connected configured unknown
c0::dsk/c0t3d0 disk connected configured unknown
c0::dsk/c0t4d0 disk connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
c1::dsk/c1t2d0 disk connected configured unknown
c1::dsk/c1t3d0 disk connected configured unknown
c1::dsk/c1t4d0 disk connected configured unknown
c2 scsi-bus connected configured unknown
c2::dsk/c2t1d0 disk connected configured unknown
c2::dsk/c2t3d0 disk connected configured unknown
c3 scsi-bus connected configured unknown
c3::dsk/c3t0d0 CD-ROM connected configured unknown

add_drv ses
(ses) already in use as a driver or alias.

why sccli can not see storages?
It's solaris 10.

Thanks for help.
Mario

Adding line
ses "scsiclass,03"
in file
/etc/driver_aliases
and reconfiguration reboot solved the problem.

Mario