LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Solaris / OpenSolaris (https://www.linuxquestions.org/questions/solaris-opensolaris-20/)
-   -   Jumpstart Installation Problem T1000 Solaris 10 (https://www.linuxquestions.org/questions/solaris-opensolaris-20/jumpstart-installation-problem-t1000-solaris-10-a-790789/)

LinuxLover 02-22-2010 09:55 AM
Jumpstart Installation Problem T1000 Solaris 10
 
Im installing solaris 10 using Jumpstart on T1000, every thing worked fine initially but after adding one new raw SATA HDD im getting this error when I boot client T1000 machine using

ok boot net - install command.

cannot open neither boot_archive nor miniroot
Enter filename [boot_archive]:

any idea ???

Jumpstart services NFS etc all are working good with other machines.

kbp 02-26-2010 07:58 AM
My only guess would be that adding the drive has stuffed up your device aliases somehow, can you post the output of 'devalias' ?... also can you jump it when you remove the disk again ?

cheers

LinuxLover 02-28-2010 11:26 PM
Hi

Below is the output of devalias

Code:
{0} ok devalias
nvram                    /virtual-devices/nvram@3
net3                    /pci@7c0/pci@0/pci@8/network@1,1
net2                    /pci@7c0/pci@0/pci@8/network@1
net1                    /pci@7c0/pci@0/network@4,1
net0                    /pci@7c0/pci@0/network@4
net                      /pci@7c0/pci@0/network@4
disk                    /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0
scsi                    /pci@7c0/pci@0/pci@8/scsi@2
ttya                    /ebus@800/serial@0,c2c000
virtual-console          /virtual-devices/console@1
name                    aliases

kbp 03-03-2010 04:26 PM
Nothing obviously wrong... did you add a controller as well when you added the disk ?


All times are GMT -5. The time now is 01:54 PM.