I have installed solaris 10 on v210 machine but while installation it is showing disk geometry as follow
but when i remove the cdrom it change controller and target numbers. because of which i am not able to boot the machine and getting error posted below.

is there any work around on this.

AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@0,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@1,0
Specify disk (enter its number):





The / file system (/dev/rdsk/c0t0d0s0) is being checked.

WARNING - Unable to repair the / filesystem. Run fsck
manually (fsck -F ufs /dev/rdsk/c0t0d0s0).

Sep 24 16:32:54 svc.startd[7]: svc:/system/filesystem/usr:default: Method "/lib/svc/method/fs-usr" failed with exit status 95.
[ system/filesystem/usr:default failed fatally (see 'svcs -x' for details) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run

Root password for system maintenance (control-d to bypass):

Are you removing the media or the drive itself ? Solaris shouldn't rename its devices anyway.

You might try to fix the /etc/vfstab and reboot.