I am trying to verify the SCSI cabling on the connection of two (2) V210 SunFires to a StorEdge 3310.
The diagrams I have gotten from Sun show four (4) ports on the back of the 3310. Ihave six (6).
I have added the correct package SUNWsscs so that I will have sccli and the web browser administration. I am trying to verify the external cable connections so that I can rule out hardware before continuing on to the software.
There were no software errors detected in the package installation and one of the two V210 can be access by the ssadmin. Questions are:
1.) Is there a diagram that shows a six (6) port connection?
2.) Do I still need a SCSI terminator on one of these ports?
3.) I do have one (1) drive configured in the array. Shouldn’t at least one (1) of the two (2) V210s see the drive?
Thank You

Having a 3310 array (scsi), you will need to change the scsi-initiator-id in
one of them. The default is 7 in all servers. Change it to 6 in the other server. Google 3310+scsi-initiator-id.

Check this site out:

http://docs.sun.com/app/docs/doc/817...l4dh4k1?a=view

Yes sir. I have seen this before. It is very close to what I need. My problem is the diagrams. They always show the 3310 with 4 ports. I have 6 ports. Ch0 thru Ch3 and the a Single Bus Conf. and a Dual Bus Conf. I believe this is because it is a different controller than just a JBOD.
I would like the V210s to see both six disc arrays and I am trying to make sure the cable configuration (connections) are correct.
Thank You for your help.