LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > slarm64
User Name
Password
slarm64 This forum is for the discussion of slarm64.

Notices


Reply
  Search this Thread
Old 02-05-2023, 01:59 PM   #1
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,864

Rep: Reputation: Disabled
Orange Pi 3 LTS H6 (aarch64)


information board:

http://www.orangepi.org/
Specifications
wiki
buy
slarm64.org
image_build_kit slarm64 (Slackware aarch64 unofficial port)

Specifications:
  • CPU Allwinner H6 Quad-core 64-bit 1.8GHz high-performance Cortex-A53 processor
  • GPU
    High-performance multi-core GPU Mali T720
    OpenGL ES3.1/3.0/2.0/1.1
  • RAM 2GB LPDDR3 (shared with GPU)
  • Onboard Storage TF card slot、8GB EMMC
  • Onboard Network
    YT8531C Chip
    Support 10/100M/1000M Ethernet
  • Onboard WIFI+Bluetooth
    AW859A Chip
    Support IEEE 802.11 a/b/g/n/ac
    Support BT5.0
  • Video Output HDMI 2.0a 、TV CVBS output
  • Audio output
    HDMI Output
    3.5mm Audio Port
  • Power Source 5V3A Type-C
  • Power management chip AXP805
  • USB port 1*USB 3.0 HOST、1*USB 2.0 HOST、1*USB2.0 OTG
  • 26pin headers 1*I2C、1*SPI、1*UART&Multiple GPIO Ports
  • Debug serial port UART-TX、UART-RX &GND
  • LED Power LED& Status LED
  • IR Receiver Support IR remote control for Orange Pi
  • Button Power Button (SW4)
  • Dimension 85mm×56mm
  • Weight 45g
Attached Thumbnails
Click image for larger version

Name:	Orange-pi-3lts-topview.jpg
Views:	6
Size:	113.1 KB
ID:	40406   Click image for larger version

Name:	Orange-pi-3-lts-interface-details-img1.jpg
Views:	12
Size:	176.8 KB
ID:	40407  

Last edited by sndwvs; 02-05-2023 at 02:06 PM.
 
Old 03-09-2023, 03:44 PM   #4
Gerald Schorle
LQ Newbie
 
Registered: Mar 2023
Distribution: redhat,opensuse,pclos,slackware
Posts: 2

Rep: Reputation: 0
I have testet
"slarm64-current-aarch64-xfce-orange_pi_3_lts-6.1.11-build-20230212.img"
by micro-SDcard. Boot fails. Same bevaviour shows image
"slarm64-current-aarch64-core-orange_pi_3_lts-6.1.11-build-20230212.img".

Here the Log of xfce-image:

U-Boot SPL 2022.10-sun50iw6 (Feb 11 2023 - 22:42:30 +0200)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.7(release):v2.7.0
NOTICE: BL31: Built : 22:41:53, Feb 11 2023
NOTICE: BL31: Detected Allwinner H6 SoC (1728)
NOTICE: BL31: Found U-Boot DTB at 0xa087528, model: OrangePi 3 LTS
ERROR: RSB: read command: 0x103
ERROR: RSB: write command: 0x3
ERROR: RSB: read command: 0x103
ERROR: RSB: write command: 0x3
ERROR: RSB: read command: 0x3
ERROR: RSB: write command: 0x3
ERROR: RSB: read command: 0x3
ERROR: RSB: write command: 0x3
ERROR: RSB: read command: 0x103
ERROR: RSB: write command: 0x3
ERROR: RSB: read command: 0x3
ERROR: RSB: write command: 0x3
ERROR: RSB: read command: 0x3
ERROR: RSB: write command: 0x3


U-Boot 2022.10-sun50iw6 (Feb 11 2023 - 22:42:30 +0200) Allwinner Technology

CPU: Allwinner H6 (SUN50I)
Model: OrangePi 3 LTS
DRAM: 2 GiB
Core: 50 devices, 14 uclasses, devicetree: separate
WDT: Not starting watchdog@7020400
MMC: mmc@4020000: 0, mmc@4022000: 1
Loading Environment from FAT... Unable to use mmc 0:1...
In: serial@5000000
Out: serial@5000000
Err: serial@5000000
Net: No ethernet found.
Autoboot in 2 seconds, press <Space> to stop
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2716 bytes read in 2 ms (1.3 MiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
147 bytes read in 2 ms (71.3 KiB/s)
38625 bytes read in 7 ms (5.3 MiB/s)
23142408 bytes read in 1117 ms (19.8 MiB/s)
4191 bytes read in 5 ms (818.4 KiB/s)
Applying kernel provided DT fixup script (sun50i-h6-fixup.scr)
## Executing script at 45000000
6266815 bytes read in 312 ms (19.2 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=41880000
## Loading init Ramdisk from Legacy Image at 4ff00000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 6266751 Bytes = 6 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Ramdisk to 49a06000, end 49ffff7f ... OK
Loading Device Tree to 0000000049994000, end 0000000049a05fff ... OK

Starting kernel ...

[ 1.164722] scpi_protocol scpi: incorrect or no SCP firmware found
[ 1.166465] axp20x-rsb sunxi-rsb-745: Failed to set masks in 0x40: -5
[ 1.166490] axp20x-rsb sunxi-rsb-745: failed to add irq chip: -5
[ 1.217051] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
[ 1.217076] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 1.224044] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
[ 1.224056] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 1.224066] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 1.231992] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 1.239028] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 1.271215] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 1.281812] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
[ 1.288811] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
[ 1.298225] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 1.298246] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 1.305143] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 1.312011] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 1.312023] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 1.314145] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
[ 1.319354] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 1.352255] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
[ 1.360740] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 1.367629] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 1.378360] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 1.378413] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
[ 1.385267] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 1.385277] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 1.385293] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
[ 1.392256] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 1.521592] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 1.528534] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 1.540025] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
[ 1.540179] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 1.547062] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
[ 1.547082] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 1.569397] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 1.580226] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 11.493043] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 11.499985] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 11.510533] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
[ 11.517517] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
[ 11.525684] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 11.532594] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 11.539937] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 11.550731] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back

###########
end of kernelmessages

Has experts any idea, what runnnig wrong ?
Depend fails on u-boot (kernelparameters) or kernel ?

I tried to boot with Armbian current rolling release of 6.1.11 kernel.
Boot runs without issues and X11 start successfull.
Unfortunatly I need SysVinit boot and Motif library,
what's with slarm64-images is given.
 
  


Reply

Tags
allwinner, h6, slackware, slarm64


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Orange Pi 5 RK3588s (aarch64) sndwvs slarm64 11 01-05-2024 01:20 PM
Orange Pi 4 RK3399 (aarch64) sndwvs slarm64 2 03-18-2023 10:24 AM
[SOLVED] Orange Pi 4 RK3399 (aarch64) sndwvs Slackware - ARM 5 11-21-2021 06:53 AM
LXer: Linux Kernel 3.14.60 LTS Released with PowerPC and AArch64 Improvements LXer Syndicated Linux News 0 02-01-2016 11:10 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > slarm64

All times are GMT -5. The time now is 03:25 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration