LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware > Slackware - ARM
User Name
Password
Slackware - ARM This forum is for the discussion of Slackware ARM.

Notices


Reply
  Search this Thread
Old 06-04-2018, 02:16 PM   #61
sndwvs
Member
 
Registered: Aug 2014
Posts: 203

Original Poster
Rep: Reputation: Disabled

problem in the u-boot version above v2018.1 does not boot the system
i will assemble new images

EDIT:
new images are available and the instruction is corrected
slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz
slack-current-arm-xfce_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz

Last edited by sndwvs; 06-04-2018 at 03:18 PM.
 
1 members found this post helpful.
Old 06-05-2018, 06:24 AM   #62
NoKey
LQ Newbie
 
Registered: Jun 2018
Posts: 18

Rep: Reputation: Disabled
This is what I get using the latest files and procedure:
Quote:
U-Boot SPL 2018.01-dirty (Jun 04 2018 - 21:13:27)
Returning to boot ROM...


U-Boot 2018.01-dirty (Jun 04 2018 - 21:13:27 +0300)

Model: Firefly-RK3288
DRAM: 2 GiB
MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Model: Firefly-RK3288
Net:
Warning: ethernet@ff290000 (eth0) using random MAC address - 62:be:08:7d:7e:21
eth0: ethernet@ff290000
starting USB...
USB0: Core Release: 3.10a
USB1: Core Release: 3.10a
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
scanning bus 0 for devices... cannot reset port 1!?
1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
1309 bytes read in 15 ms (85 KiB/s)
## Executing script at 00000000
U-boot loaded from SD
25 bytes read in 17 ms (1000 Bytes/s)
57751 bytes read in 20 ms (2.8 MiB/s)
7820424 bytes read in 361 ms (20.7 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 0ffee000, end 0ffff196 ... OK

Starting kernel ...

[ 0.000000] L2C: failed to init: -19
[ 0.000000] rockchip_clk_register_branches: unknown clock type 9
[ 0.219266] rk3288_ddr_suspend_init: could not map ddr ctrl
[ 0.221496] of_amba_device_create(): amba_device_add() failed (-19) for /amba/dma-controller@ffb20000
[ 0.436840] dovdd_1v8: regulator get failed, ret=-517
[ 0.438277] vcc_sd: regulator get failed, ret=-517
[ 0.438926] vcc_flash: regulator get failed, ret=-517
[ 0.442649] vcc28_dvp: regulator get failed, ret=-517
[ 0.632280] rk-vcodec ff9a0000.vpu-service: could not find power_model node
[ 0.634787] rk-vcodec ff9c0000.hevc-service: could not find power_model node
[ 0.723016] rockchip-vop ff940000.vop: invalid resource
[ 0.729974] rockchip-vop ff940000.vop: unable to request PWM
[ 0.736410] rockchip-vop ff930000.vop: invalid resource
[ 0.743383] rockchip-vop ff930000.vop: unable to request PWM
[ 0.750186] i2c i2c-6: of_i2c: modalias failure on /hdmi@ff980000/ports
[ 0.816694] mali ffa30000.gpu: Failed to get regulator
[ 0.822623] mali ffa30000.gpu: Power control initialization failed
[ 0.849536] rk_gmac-dwmac ff290000.ethernet: phy regulator is not available yet, deferred probing
[ 1.143249] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=92000
[ 1.152890] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=83000
[ 1.166240] cpu cpu0: Failed to get reg
[ 1.313782] dwmmc_rockchip ff0d0000.dwmmc: could not set regulator OCR (-22)
[ 1.322932] dwmmc_rockchip ff0d0000.dwmmc: failed to enable vmmc regulator
[ 1.386631] rockchip-i2s ff890000.i2s: Could not register PCM
[ 1.394265] rockchip-spdif ff8b0000.sound: Could not register PCM
[ 1.416325] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
[ 2.462990] rockchip-i2s ff890000.i2s: Could not register PCM
[ 2.475788] rockchip-spdif ff8b0000.sound: Could not register PCM
[ 2.510346] rockchip-i2s ff890000.i2s: Could not register PCM
[ 2.518066] rockchip-spdif ff8b0000.sound: Could not register PCM
Nothing more happens after this, although the first time I powered the system back on after programming it, I got a kernel crash about 43 seconds later (looks like the watchdog timer attempting to reboot the system):
Quote:
[ 45.158326] Unable to handle kernel NULL pointer dereference at virtual address 00000068
[ 45.170832] pgd = edb6c000
[ 45.177317] [00000068] *pgd=2d491835, *pte=00000000, *ppte=00000000
[ 45.187938] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[ 45.197511] Modules linked in:
[ 45.204478] CPU: 3 PID: 509 Comm: reboot Tainted: G W 4.4.132 #15
[ 45.216170] Hardware name: Rockchip (Device Tree)
[ 45.225040] task: ecc5ba00 task.stack: ecc7a000
[ 45.233692] PC is at snd_soc_component_write+0x14/0x48
[ 45.242991] LR is at snd_soc_write+0x1c/0x20
[ 45.251267] pc : [<c094c188>] lr : [<c094c1d8>] psr: 600b0013
[ 45.251267] sp : ecc7bdd0 ip : ecc7bde0 fp : ecc7bddc
[ 45.271093] r10: ed8a9854 r9 : c0e368c5 r8 : c12d4020
[ 45.280409] r7 : 3ffffcc8 r6 : c1268df0 r5 : 00000000 r4 : c13495ec
[ 45.291196] r3 : 00005dc3 r2 : 00000058 r1 : 00000001 r0 : 00000028
[ 45.302004] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 45.313583] Control: 10c5387d Table: 2db6c06a DAC: 00000051
<load of register dumps cut>
[ 46.517108] Process reboot (pid: 509, stack limit = 0xecc7a258)
[ 46.527572] Stack: (0xecc7bdd0 to 0xecc7c000)
[ 46.536343] bdc0: ecc7bdec ecc7bde0 c094c1d8 c094c180
[ 46.549493] bde0: ecc7be0c ecc7bdf0 c094eaac c094c1c8 ed8a9820 ed8a9820 c1344ca0 ed8b9050
[ 46.562725] be00: ecc7be24 ecc7be10 c0815ae0 c094ea64 ed8a982c ed8a9820 ecc7be54 ecc7be28
[ 46.576008] be20: c06a35f0 c0815aac c12d4dc0 00000000 4321fedc c12111e0 00000000 00000000
[ 46.589388] be40: ecc7a000 00000000 ecc7be64 ecc7be58 c013e558 c06a3480 ecc7be7c ecc7be68
[ 46.602760] be60: c013e688 c013e528 01234567 4321fedc ecc7bfa4 ecc7be80 c013e9f8 c013e678
[ 46.616220] be80: 00000000 c018a5e0 5868ef6c c11af3e4 c1214800 edb4f100 600f0013 00000000
[ 46.629660] bea0: ecc7bebc ecc7beb0 ecc7becc ecc7beb8 c0149a24 c0170878 ffffe000 c0baf668
[ 46.643165] bec0: edf61218 edf61218 00000000 edb7d510 00080060 c0baf6b0 edf611c8 c0255854
[ 46.656743] bee0: edb7d500 edf77cb0 ecc7bf14 ecc7bef8 c0255854 c0182ad0 edb4f100 edf77cb0
[ 46.670361] bf00: 00000000 edb7d510 ecc7bf24 ecc7bf18 c0255a0c c0255814 ecc7bf5c ecc7bf28
[ 46.683953] bf20: c0238cb0 c02559e4 00000020 00000000 ecc7bf54 ecc5ba00 00000000 c12d4ef4
[ 46.697548] bf40: 00000006 c01079c4 ecc7a000 00000000 ecc7bf6c c0139b04 ecc5ba00 00000000
[ 46.711157] bf60: ecc7bf8c ecc7bf70 c0139b04 c0babe70 c01079c4 ffffe000 ecc7bfb0 00000006
[ 46.724753] bf80: ecc7bfac beb7be24 00000001 000122e0 00000058 c01079c4 00000000 ecc7bfa8
[ 46.738323] bfa0: c0107800 c013e878 beb7be24 00000001 fee1dead 28121969 01234567 00000000
[ 46.751978] bfc0: beb7be24 00000001 000122e0 00000058 00000001 00000000 00023108 00000000
[ 46.765600] bfe0: b6eea6c0 beb7bc8c 000110b8 b6eea6e0 600b0010 fee1dead 00000000 00000000
[ 46.779310] [<c094c188>] (snd_soc_component_write) from [<c094c1d8>] (snd_soc_write+0x1c/0x20)
[ 46.793625] [<c094c1d8>] (snd_soc_write) from [<c094eaac>] (es8323_i2c_shutdown+0x54/0x124)
[ 46.807690] [<c094eaac>] (es8323_i2c_shutdown) from [<c0815ae0>] (i2c_device_shutdown+0x40/0x44)
[ 46.822302] [<c0815ae0>] (i2c_device_shutdown) from [<c06a35f0>] (device_shutdown+0x17c/0x1c8)
[ 46.836778] [<c06a35f0>] (device_shutdown) from [<c013e558>] (kernel_restart_prepare+0x3c/0x48)
[ 46.851415] [<c013e558>] (kernel_restart_prepare) from [<c013e688>] (kernel_restart+0x1c/0x60)
[ 46.866009] [<c013e688>] (kernel_restart) from [<c013e9f8>] (SyS_reboot+0x18c/0x1cc)
[ 46.879605] [<c013e9f8>] (SyS_reboot) from [<c0107800>] (ret_fast_syscall+0x0/0x48)
[ 46.893173] Code: e92dd800 e24cb004 e52de004 e8bd4000 (e590c040)
[ 46.905065] ---[ end trace 072d6577db6479a3 ]---
Looking at the first kernel messages makes me wonder if the device tree is correct.

Last edited by NoKey; 06-05-2018 at 09:54 AM.
 
Old 06-05-2018, 11:05 AM   #63
NoKey
LQ Newbie
 
Registered: Jun 2018
Posts: 18

Rep: Reputation: Disabled
Does this:
Quote:
## Flattened Device Tree blob at 01f00000
mean there should be an FDT @ offset 01f00000 of the image?
Because in that case it seems to be missing:
(hexdump of the unpacked slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz)
Code:
*
01da9160  00 00 00 00 bb 77 73 bb  00 00 00 00 00 00 00 00  |.....ws.........|
01da9170  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
01da9180  20 00 00 00 34 c9 4d bc  00 00 00 00 34 c9 4d bc  | ...4.M.....4.M.|
01da9190  4e 8b 15 5b f0 e9 9b 59  00 00 00 00 00 00 00 00  |N..[...Y........|
01da91a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
01f8c000  ff 43 00 00 00 10 00 00  54 8b 15 5b 54 8b 15 5b  |.C......T..[T..[|
01f8c010  2e 8b 15 5b 00 00 00 00  00 00 04 00 08 00 00 00  |...[............|
01f8c020  00 00 08 00 06 00 00 00  0a f3 01 00 04 00 00 00  |................|
01f8c030  00 00 00 00 00 00 00 00  01 00 00 00 2d 17 00 00  |............-...|
01f8c040  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
This looks to be NULL data in that range. But I could be misinterpreting here...

Last edited by NoKey; 06-05-2018 at 11:11 AM.
 
Old 06-05-2018, 11:55 AM   #64
sndwvs
Member
 
Registered: Aug 2014
Posts: 203

Original Poster
Rep: Reputation: Disabled
yes, I yesterday that at reboot there is an error

the first launch is divided into 2 stages
1 stretches the FS and reboots the system
2 creates a swap and starts the system in normal mode

you can replace the current kernel with kernel-rk3288-4.4.119-arm-1mara.txz

in the debug console there is no login, you can evade the informative value by changing the parameter verbosity = 1 to 8 in the /boot/uEnv.txt file.

on the image
check the downloaded image:
md5sum -c slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz.md5
extract:
tar xf slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz

fdisk -l slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img
will output:
Code:
Disk slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img: 1.4 GiB, 1534066688 bytes, 2996224 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd29a0203

Device                                                                        Boot Start     End Sectors  Size Id Type
slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img1      32768 2996223 2963456  1.4G 83 Linux
sudo mount -o loop,offset=$((512*32768)) slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img /media
ls /media

Last edited by sndwvs; 06-05-2018 at 03:15 PM.
 
Old 06-05-2018, 02:55 PM   #65
NoKey
LQ Newbie
 
Registered: Jun 2018
Posts: 18

Rep: Reputation: Disabled
I'll check the day after tomorrow. I took a day off tomorrow to enjoy the nice weather here in the Netherlands.
 
Old 06-05-2018, 03:34 PM   #66
sndwvs
Member
 
Registered: Aug 2014
Posts: 203

Original Poster
Rep: Reputation: Disabled
update kernel kernel-rk3288-4.4.135-arm-3mara.txz
http://dl.fail.pp.ua/slackware/pkg/a...irefly-rk3288/
 
Old 06-07-2018, 08:25 AM   #67
NoKey
LQ Newbie
 
Registered: Jun 2018
Posts: 18

Rep: Reputation: Disabled
Ok, I've tested it, got a lot more output but still no login prompt.
There's too much output to paste it all in one post so I'll limit it to the most important bits:
8 times this line:
Code:
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
Code:
[    0.441310] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dovdd-1v8-regulator[0]'
[    0.441857] dovdd_1v8: regulator get failed, ret=-517
[    0.442124] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vsys-regulator[0]'
[    0.442916] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
[    0.443423] vcc_sd: regulator get failed, ret=-517
[    0.443649] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/flash-regulator[0]'
[    0.444101] vcc_flash: regulator get failed, ret=-517
Code:
[    2.334926] mali ffa30000.gpu: Failed to get regulator
[    2.340851] mali ffa30000.gpu: Power control initialization failed
These look like a some devicetree errors:
Code:
[    3.558844] of_get_named_gpiod_flags: can't parse 'vsel-gpios' property of node '/i2c@ff650000/syr827@40[0]'
[    3.558854] of_get_named_gpiod_flags: can't parse 'vsel-gpio' property of node '/i2c@ff650000/syr827@40[0]'
Code:
[    3.842547] of_get_named_gpiod_flags: can't parse 'vsel-gpios' property of node '/i2c@ff650000/syr828@41[0]'
[    3.860175] of_get_named_gpiod_flags: can't parse 'vsel-gpio' property of node '/i2c@ff650000/syr828@41[0]'
Code:
[    4.587424] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@ff0c0000[0]'
[    4.599163] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@ff0c0000[0]'
(This one for multiple instances of dwmmc)
Code:
[    4.648679] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0c0000[0]'
[    4.660675] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0c0000[0]'
Several kernel dumps concerning the rk_spdif_driver (limiting it to 1 to keep the post <=30000 characters:
Code:
[    5.466126] ------------[ cut here ]------------
[    5.473890] WARNING: CPU: 1 PID: 1 at drivers/clk/clk.c:681 clk_core_disable+0x34/0x1d4()
[    5.485660] Modules linked in:
[    5.491706] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.4.135 #17
[    5.501151] Hardware name: Rockchip (Device Tree)
[    5.509029] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    5.520330] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    5.531053] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    5.542759] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    5.555225] [<c011e4d8>] (warn_slowpath_null) from [<c08efa20>] (clk_core_disable+0x34/0x1d4)
[    5.567371] [<c08efa20>] (clk_core_disable) from [<c08efbf4>] (clk_disable+0x34/0x40)
[    5.578780] [<c08efbf4>] (clk_disable) from [<c0959cf0>] (rk_spdif_probe+0x280/0x2cc)
[    5.590213] [<c0959cf0>] (rk_spdif_probe) from [<c06a8060>] (platform_drv_probe+0x60/0xac)
[    5.602116] [<c06a8060>] (platform_drv_probe) from [<c06a62bc>] (driver_probe_device+0x1a8/0x298)
[    5.614717] [<c06a62bc>] (driver_probe_device) from [<c06a6408>] (__driver_attach+0x5c/0x9c)
[    5.626823] [<c06a6408>] (__driver_attach) from [<c06a47a4>] (bus_for_each_dev+0x90/0xa0)
[    5.638663] [<c06a47a4>] (bus_for_each_dev) from [<c06a5d44>] (driver_attach+0x28/0x30)
[    5.650339] [<c06a5d44>] (driver_attach) from [<c06a5984>] (bus_add_driver+0x184/0x1ec)
[    5.662027] [<c06a5984>] (bus_add_driver) from [<c06a7060>] (driver_register+0xb0/0xf0)
[    5.673741] [<c06a7060>] (driver_register) from [<c06a7fa0>] (__platform_driver_register+0x40/0x54)
[    5.686660] [<c06a7fa0>] (__platform_driver_register) from [<c1143db4>] (rk_spdif_driver_init+0x18/0x20)
[    5.700105] [<c1143db4>] (rk_spdif_driver_init) from [<c0101c28>] (do_one_initcall+0x1a0/0x1d4)
[    5.712702] [<c0101c28>] (do_one_initcall) from [<c1100f3c>] (kernel_init_freeable+0x21c/0x26c)
[    5.725305] [<c1100f3c>] (kernel_init_freeable) from [<c0bac094>] (kernel_init+0x18/0x118)
[    5.737446] [<c0bac094>] (kernel_init) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    5.748817] ---[ end trace 5fb99cbd58bcf8fc ]---
Then there are a lot of these:
Code:
[    5.825185] dwmmc_rockchip ff0f0000.dwmmc: Unexpected interrupt latency
ANd more dumps, which look a lot more severe:
Code:
[    6.914028] ------------[ cut here ]------------
[    6.914038] WARNING: CPU: 2 PID: 6 at drivers/clk/clk.c:681 clk_core_disable+0x34/0x1d4()
[    6.914042] Modules linked in:
[    6.914047] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.4.135 #17
[    6.914049] Hardware name: Rockchip (Device Tree)
[    6.914057] Workqueue: deferwq deferred_probe_work_func
[    6.914070] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    6.914077] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    6.914084] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    6.914090] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    6.914096] [<c011e4d8>] (warn_slowpath_null) from [<c08efa20>] (clk_core_disable+0x34/0x1d4)
[    6.914103] [<c08efa20>] (clk_core_disable) from [<c08efbf4>] (clk_disable+0x34/0x40)
[    6.914111] [<c08efbf4>] (clk_disable) from [<c0959cf0>] (rk_spdif_probe+0x280/0x2cc)
[    6.914118] [<c0959cf0>] (rk_spdif_probe) from [<c06a8060>] (platform_drv_probe+0x60/0xac)
[    6.914125] [<c06a8060>] (platform_drv_probe) from [<c06a62bc>] (driver_probe_device+0x1a8/0x298)
[    6.914131] [<c06a62bc>] (driver_probe_device) from [<c06a6508>] (__device_attach_driver+0x74/0x9c)
[    6.914137] [<c06a6508>] (__device_attach_driver) from [<c06a4878>] (bus_for_each_drv+0x98/0xa0)
[    6.914143] [<c06a4878>] (bus_for_each_drv) from [<c06a6058>] (__device_attach+0xb0/0x118)
[    6.914149] [<c06a6058>] (__device_attach) from [<c06a6698>] (device_initial_probe+0x1c/0x20)
[    6.914154] [<c06a6698>] (device_initial_probe) from [<c06a56b0>] (bus_probe_device+0x38/0x90)
[    6.914160] [<c06a56b0>] (bus_probe_device) from [<c06a5b00>] (deferred_probe_work_func+0x78/0x90)
[    6.914166] [<c06a5b00>] (deferred_probe_work_func) from [<c0135760>] (process_one_work+0x290/0x480)
[    6.914172] [<c0135760>] (process_one_work) from [<c013698c>] (worker_thread+0x31c/0x414)
[    6.914178] [<c013698c>] (worker_thread) from [<c013b59c>] (kthread+0x104/0x114)
[    6.914185] [<c013b59c>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    6.914188] ---[ end trace 5fb99cbd58bcf901 ]---
[    6.914204] ------------[ cut here ]------------
[    6.914210] WARNING: CPU: 2 PID: 6 at drivers/clk/clk.c:576 clk_core_unprepare+0x34/0x1ec()
[    6.914212] Modules linked in:
[    6.914216] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.4.135 #17
[    6.914218] Hardware name: Rockchip (Device Tree)
[    6.914224] Workqueue: deferwq deferred_probe_work_func
[    6.914231] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    6.914237] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    6.914242] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    6.914247] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    6.914253] [<c011e4d8>] (warn_slowpath_null) from [<c08ef64c>] (clk_core_unprepare+0x34/0x1ec)
[    6.914259] [<c08ef64c>] (clk_core_unprepare) from [<c08f0934>] (clk_unprepare+0x30/0x38)
[    6.914266] [<c08f0934>] (clk_unprepare) from [<c0959cf8>] (rk_spdif_probe+0x288/0x2cc)
[    6.914273] [<c0959cf8>] (rk_spdif_probe) from [<c06a8060>] (platform_drv_probe+0x60/0xac)
[    6.914279] [<c06a8060>] (platform_drv_probe) from [<c06a62bc>] (driver_probe_device+0x1a8/0x298)
[    6.914285] [<c06a62bc>] (driver_probe_device) from [<c06a6508>] (__device_attach_driver+0x74/0x9c)
[    6.914291] [<c06a6508>] (__device_attach_driver) from [<c06a4878>] (bus_for_each_drv+0x98/0xa0)
[    6.914296] [<c06a4878>] (bus_for_each_drv) from [<c06a6058>] (__device_attach+0xb0/0x118)
[    6.914302] [<c06a6058>] (__device_attach) from [<c06a6698>] (device_initial_probe+0x1c/0x20)
[    6.914307] [<c06a6698>] (device_initial_probe) from [<c06a56b0>] (bus_probe_device+0x38/0x90)
[    6.914313] [<c06a56b0>] (bus_probe_device) from [<c06a5b00>] (deferred_probe_work_func+0x78/0x90)
[    6.914318] [<c06a5b00>] (deferred_probe_work_func) from [<c0135760>] (process_one_work+0x290/0x480)
[    6.914323] [<c0135760>] (process_one_work) from [<c013698c>] (worker_thread+0x31c/0x414)
[    6.914329] [<c013698c>] (worker_thread) from [<c013b59c>] (kthread+0x104/0x114)
[    6.914334] [<c013b59c>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    6.914336] ---[ end trace 5fb99cbd58bcf902 ]---
[    6.914338] ------------[ cut here ]------------
[    6.914343] WARNING: CPU: 2 PID: 6 at drivers/clk/clk.c:681 clk_core_disable+0x34/0x1d4()
[    6.914346] Modules linked in:
[    6.914349] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.4.135 #17
[    6.914351] Hardware name: Rockchip (Device Tree)
[    6.914356] Workqueue: deferwq deferred_probe_work_func
[    6.914362] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    6.914368] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    6.914374] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    6.914379] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    6.914385] [<c011e4d8>] (warn_slowpath_null) from [<c08efa20>] (clk_core_disable+0x34/0x1d4)
[    6.914391] [<c08efa20>] (clk_core_disable) from [<c08efbf4>] (clk_disable+0x34/0x40)
[    6.914397] [<c08efbf4>] (clk_disable) from [<c0959ca8>] (rk_spdif_probe+0x238/0x2cc)
[    6.914403] [<c0959ca8>] (rk_spdif_probe) from [<c06a8060>] (platform_drv_probe+0x60/0xac)
[    6.914410] [<c06a8060>] (platform_drv_probe) from [<c06a62bc>] (driver_probe_device+0x1a8/0x298)
[    6.914416] [<c06a62bc>] (driver_probe_device) from [<c06a6508>] (__device_attach_driver+0x74/0x9c)
[    6.914421] [<c06a6508>] (__device_attach_driver) from [<c06a4878>] (bus_for_each_drv+0x98/0xa0)
[    6.914427] [<c06a4878>] (bus_for_each_drv) from [<c06a6058>] (__device_attach+0xb0/0x118)
[    6.914432] [<c06a6058>] (__device_attach) from [<c06a6698>] (device_initial_probe+0x1c/0x20)
[    6.914438] [<c06a6698>] (device_initial_probe) from [<c06a56b0>] (bus_probe_device+0x38/0x90)
[    6.914443] [<c06a56b0>] (bus_probe_device) from [<c06a5b00>] (deferred_probe_work_func+0x78/0x90)
[    6.914448] [<c06a5b00>] (deferred_probe_work_func) from [<c0135760>] (process_one_work+0x290/0x480)
[    6.914453] [<c0135760>] (process_one_work) from [<c013698c>] (worker_thread+0x31c/0x414)
[    6.914459] [<c013698c>] (worker_thread) from [<c013b59c>] (kthread+0x104/0x114)
[    6.914464] [<c013b59c>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    6.914466] ---[ end trace 5fb99cbd58bcf903 ]---
[    6.914518] ------------[ cut here ]------------
[    6.914524] WARNING: CPU: 2 PID: 6 at drivers/clk/clk.c:576 clk_core_unprepare+0x34/0x1ec()
[    6.914526] Modules linked in:
[    6.914529] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.4.135 #17
[    6.914531] Hardware name: Rockchip (Device Tree)
[    6.914536] Workqueue: deferwq deferred_probe_work_func
[    6.914543] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    6.914549] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    6.914555] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    6.914560] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    6.914565] [<c011e4d8>] (warn_slowpath_null) from [<c08ef64c>] (clk_core_unprepare+0x34/0x1ec)
[    6.914571] [<c08ef64c>] (clk_core_unprepare) from [<c08f0934>] (clk_unprepare+0x30/0x38)
[    6.914579] [<c08f0934>] (clk_unprepare) from [<c06c6e8c>] (regmap_mmio_free_context+0x28/0x3c)
[    6.914586] [<c06c6e8c>] (regmap_mmio_free_context) from [<c06c0120>] (regmap_exit+0x4c/0xa0)
[    6.914591] [<c06c0120>] (regmap_exit) from [<c06c0190>] (devm_regmap_release+0x1c/0x20)
[    6.914597] [<c06c0190>] (devm_regmap_release) from [<c06aa020>] (release_nodes+0x1c4/0x1e4)
[    6.914602] [<c06aa020>] (release_nodes) from [<c06aa11c>] (devres_release_all+0x54/0x5c)
[    6.914608] [<c06aa11c>] (devres_release_all) from [<c06a61e0>] (driver_probe_device+0xcc/0x298)
[    6.914613] [<c06a61e0>] (driver_probe_device) from [<c06a6508>] (__device_attach_driver+0x74/0x9c)
[    6.914619] [<c06a6508>] (__device_attach_driver) from [<c06a4878>] (bus_for_each_drv+0x98/0xa0)
[    6.914624] [<c06a4878>] (bus_for_each_drv) from [<c06a6058>] (__device_attach+0xb0/0x118)
[    6.914630] [<c06a6058>] (__device_attach) from [<c06a6698>] (device_initial_probe+0x1c/0x20)
[    6.914635] [<c06a6698>] (device_initial_probe) from [<c06a56b0>] (bus_probe_device+0x38/0x90)
[    6.914641] [<c06a56b0>] (bus_probe_device) from [<c06a5b00>] (deferred_probe_work_func+0x78/0x90)
[    6.914646] [<c06a5b00>] (deferred_probe_work_func) from [<c0135760>] (process_one_work+0x290/0x480)
[    6.914651] [<c0135760>] (process_one_work) from [<c013698c>] (worker_thread+0x31c/0x414)
[    6.914656] [<c013698c>] (worker_thread) from [<c013b59c>] (kthread+0x104/0x114)
[    6.914662] [<c013b59c>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    6.914664] ---[ end trace 5fb99cbd58bcf904 ]---
[    6.914917] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0)
[    6.914949] gpio-5 (GPIO Power): gpiod_set_debounce: missing set() or set_debounce() operations
[    6.915124] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    6.915963] rockchip-spdif ff8b0000.sound: Could not register PCM
[    6.915965] ------------[ cut here ]------------
[    6.915973] WARNING: CPU: 2 PID: 6 at drivers/clk/clk.c:681 clk_core_disable+0x34/0x1d4()
[    6.915976] Modules linked in:
[    6.915980] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.4.135 #17
[    6.915982] Hardware name: Rockchip (Device Tree)
[    6.915989] Workqueue: deferwq deferred_probe_work_func
[    6.915998] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    6.916005] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    6.916011] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    6.916016] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    6.916022] [<c011e4d8>] (warn_slowpath_null) from [<c08efa20>] (clk_core_disable+0x34/0x1d4)
[    6.916028] [<c08efa20>] (clk_core_disable) from [<c08efbf4>] (clk_disable+0x34/0x40)
[    6.916035] [<c08efbf4>] (clk_disable) from [<c0959cf0>] (rk_spdif_probe+0x280/0x2cc)
[    6.916041] [<c0959cf0>] (rk_spdif_probe) from [<c06a8060>] (platform_drv_probe+0x60/0xac)
[    6.916048] [<c06a8060>] (platform_drv_probe) from [<c06a62bc>] (driver_probe_device+0x1a8/0x298)
[    6.916054] [<c06a62bc>] (driver_probe_device) from [<c06a6508>] (__device_attach_driver+0x74/0x9c)
[    6.916060] [<c06a6508>] (__device_attach_driver) from [<c06a4878>] (bus_for_each_drv+0x98/0xa0)
[    6.916065] [<c06a4878>] (bus_for_each_drv) from [<c06a6058>] (__device_attach+0xb0/0x118)
[    6.916071] [<c06a6058>] (__device_attach) from [<c06a6698>] (device_initial_probe+0x1c/0x20)
[    6.916076] [<c06a6698>] (device_initial_probe) from [<c06a56b0>] (bus_probe_device+0x38/0x90)
[    6.916082] [<c06a56b0>] (bus_probe_device) from [<c06a5b00>] (deferred_probe_work_func+0x78/0x90)
[    6.916088] [<c06a5b00>] (deferred_probe_work_func) from [<c0135760>] (process_one_work+0x290/0x480)
[    6.916093] [<c0135760>] (process_one_work) from [<c013698c>] (worker_thread+0x31c/0x414)
[    6.916099] [<c013698c>] (worker_thread) from [<c013b59c>] (kthread+0x104/0x114)
[    6.916104] [<c013b59c>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    6.916107] ---[ end trace 5fb99cbd58bcf905 ]---
[    6.916109] ------------[ cut here ]------------
[    6.916114] WARNING: CPU: 2 PID: 6 at drivers/clk/clk.c:576 clk_core_unprepare+0x34/0x1ec()
[    6.916116] Modules linked in:
[    6.916120] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.4.135 #17
[    6.916121] Hardware name: Rockchip (Device Tree)
[    6.916126] Workqueue: deferwq deferred_probe_work_func
[    6.916133] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    6.916139] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    6.916144] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    6.916150] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    6.916155] [<c011e4d8>] (warn_slowpath_null) from [<c08ef64c>] (clk_core_unprepare+0x34/0x1ec)
[    6.916161] [<c08ef64c>] (clk_core_unprepare) from [<c08f0934>] (clk_unprepare+0x30/0x38)
[    6.916167] [<c08f0934>] (clk_unprepare) from [<c0959cf8>] (rk_spdif_probe+0x288/0x2cc)
[    6.916174] [<c0959cf8>] (rk_spdif_probe) from [<c06a8060>] (platform_drv_probe+0x60/0xac)
[    6.916180] [<c06a8060>] (platform_drv_probe) from [<c06a62bc>] (driver_probe_device+0x1a8/0x298)
[    6.916186] [<c06a62bc>] (driver_probe_device) from [<c06a6508>] (__device_attach_driver+0x74/0x9c)
[    6.916192] [<c06a6508>] (__device_attach_driver) from [<c06a4878>] (bus_for_each_drv+0x98/0xa0)
[    6.916197] [<c06a4878>] (bus_for_each_drv) from [<c06a6058>] (__device_attach+0xb0/0x118)
[    6.916203] [<c06a6058>] (__device_attach) from [<c06a6698>] (device_initial_probe+0x1c/0x20)
[    6.916208] [<c06a6698>] (device_initial_probe) from [<c06a56b0>] (bus_probe_device+0x38/0x90)
[    6.916214] [<c06a56b0>] (bus_probe_device) from [<c06a5b00>] (deferred_probe_work_func+0x78/0x90)
[    6.916219] [<c06a5b00>] (deferred_probe_work_func) from [<c0135760>] (process_one_work+0x290/0x480)
[    6.916223] [<c0135760>] (process_one_work) from [<c013698c>] (worker_thread+0x31c/0x414)
[    6.916229] [<c013698c>] (worker_thread) from [<c013b59c>] (kthread+0x104/0x114)
[    6.916234] [<c013b59c>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    6.916248] ---[ end trace 5fb99cbd58bcf906 ]---
[    6.916250] ------------[ cut here ]------------
[    6.916255] WARNING: CPU: 2 PID: 6 at drivers/clk/clk.c:681 clk_core_disable+0x34/0x1d4()
[    6.916258] Modules linked in:
[    6.916261] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.4.135 #17
[    6.916263] Hardware name: Rockchip (Device Tree)
[    6.916268] Workqueue: deferwq deferred_probe_work_func
[    6.916275] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    6.916281] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    6.916286] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    6.916291] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    6.916297] [<c011e4d8>] (warn_slowpath_null) from [<c08efa20>] (clk_core_disable+0x34/0x1d4)
[    6.916303] [<c08efa20>] (clk_core_disable) from [<c08efbf4>] (clk_disable+0x34/0x40)
[    6.916309] [<c08efbf4>] (clk_disable) from [<c0959ca8>] (rk_spdif_probe+0x238/0x2cc)
[    6.916315] [<c0959ca8>] (rk_spdif_probe) from [<c06a8060>] (platform_drv_probe+0x60/0xac)
[    6.916322] [<c06a8060>] (platform_drv_probe) from [<c06a62bc>] (driver_probe_device+0x1a8/0x298)
[    6.916328] [<c06a62bc>] (driver_probe_device) from [<c06a6508>] (__device_attach_driver+0x74/0x9c)
[    6.916333] [<c06a6508>] (__device_attach_driver) from [<c06a4878>] (bus_for_each_drv+0x98/0xa0)
[    6.916338] [<c06a4878>] (bus_for_each_drv) from [<c06a6058>] (__device_attach+0xb0/0x118)
[    6.916344] [<c06a6058>] (__device_attach) from [<c06a6698>] (device_initial_probe+0x1c/0x20)
[    6.916349] [<c06a6698>] (device_initial_probe) from [<c06a56b0>] (bus_probe_device+0x38/0x90)
[    6.916355] [<c06a56b0>] (bus_probe_device) from [<c06a5b00>] (deferred_probe_work_func+0x78/0x90)
[    6.916360] [<c06a5b00>] (deferred_probe_work_func) from [<c0135760>] (process_one_work+0x290/0x480)
[    6.916365] [<c0135760>] (process_one_work) from [<c013698c>] (worker_thread+0x31c/0x414)
[    6.916370] [<c013698c>] (worker_thread) from [<c013b59c>] (kthread+0x104/0x114)
[    6.916375] [<c013b59c>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    6.916377] ---[ end trace 5fb99cbd58bcf907 ]---
[    6.916425] ------------[ cut here ]------------
[    6.916431] WARNING: CPU: 2 PID: 6 at drivers/clk/clk.c:576 clk_core_unprepare+0x34/0x1ec()
[    6.916433] Modules linked in:
[    6.916437] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.4.135 #17
[    6.916439] Hardware name: Rockchip (Device Tree)
[    6.916444] Workqueue: deferwq deferred_probe_work_func
[    6.916451] [<c011049c>] (unwind_backtrace) from [<c010c058>] (show_stack+0x20/0x24)
[    6.916457] [<c010c058>] (show_stack) from [<c05753d8>] (dump_stack+0x78/0x94)
[    6.916462] [<c05753d8>] (dump_stack) from [<c011e3f0>] (warn_slowpath_common+0x98/0xc4)
[    6.916467] [<c011e3f0>] (warn_slowpath_common) from [<c011e4d8>] (warn_slowpath_null+0x2c/0x34)
[    6.916473] [<c011e4d8>] (warn_slowpath_null) from [<c08ef64c>] (clk_core_unprepare+0x34/0x1ec)
[    6.916479] [<c08ef64c>] (clk_core_unprepare) from [<c08f0934>] (clk_unprepare+0x30/0x38)
[    6.916486] [<c08f0934>] (clk_unprepare) from [<c06c6e8c>] (regmap_mmio_free_context+0x28/0x3c)
[    6.916492] [<c06c6e8c>] (regmap_mmio_free_context) from [<c06c0120>] (regmap_exit+0x4c/0xa0)
[    6.916498] [<c06c0120>] (regmap_exit) from [<c06c0190>] (devm_regmap_release+0x1c/0x20)
[    6.916503] [<c06c0190>] (devm_regmap_release) from [<c06aa020>] (release_nodes+0x1c4/0x1e4)
[    6.916508] [<c06aa020>] (release_nodes) from [<c06aa11c>] (devres_release_all+0x54/0x5c)
[    6.916513] [<c06aa11c>] (devres_release_all) from [<c06a61e0>] (driver_probe_device+0xcc/0x298)
[    6.916519] [<c06a61e0>] (driver_probe_device) from [<c06a6508>] (__device_attach_driver+0x74/0x9c)
[    6.916524] [<c06a6508>] (__device_attach_driver) from [<c06a4878>] (bus_for_each_drv+0x98/0xa0)
[    6.916530] [<c06a4878>] (bus_for_each_drv) from [<c06a6058>] (__device_attach+0xb0/0x118)
[    6.916535] [<c06a6058>] (__device_attach) from [<c06a6698>] (device_initial_probe+0x1c/0x20)
[    6.916541] [<c06a6698>] (device_initial_probe) from [<c06a56b0>] (bus_probe_device+0x38/0x90)
[    6.916546] [<c06a56b0>] (bus_probe_device) from [<c06a5b00>] (deferred_probe_work_func+0x78/0x90)
[    6.916552] [<c06a5b00>] (deferred_probe_work_func) from [<c0135760>] (process_one_work+0x290/0x480)
[    6.916557] [<c0135760>] (process_one_work) from [<c013698c>] (worker_thread+0x31c/0x414)
[    6.916562] [<c013698c>] (worker_thread) from [<c013b59c>] (kthread+0x104/0x114)
[    6.916567] [<c013b59c>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24)
[    6.916569] ---[ end trace 5fb99cbd58bcf908 ]---
And it ends with:
Code:
[   11.844469] random: udevd: uninitialized urandom read (16 bytes read, 44 bits of entropy available)
[   12.592498] EXT4-fs (mmcblk0p1): Remounting file system with no journal so ignoring journalled data option
[   12.672606] random: nonblocking pool is initialized
[   12.694786] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=writeback,errors=remount-ro
[   15.431762] Adding 131068k swap on /swap.  Priority:5 extents:2 across:139260k SS
Nothing more happens after that. Hitting the enter key will not even add a blank line on the terminal window.

I want to note that aside from the kernel, I also updated the modules, firmware and kernel headers with the same versions.
 
Old 06-07-2018, 12:43 PM   #68
sndwvs
Member
 
Registered: Aug 2014
Posts: 203

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by NoKey View Post
Ok, I've tested it, got a lot more output but still no login prompt.
........
Nothing more happens after that. Hitting the enter key will not even add a blank line on the terminal window.

I want to note that aside from the kernel, I also updated the modules, firmware and kernel headers with the same versions.

yes errors are present and above I wrote that on console debug there is no login
the input can be made by connecting the monitor(hdmi/vga) and keyboard to the board (I connect via the DVI->HDMI adapter)
 
Old 06-08-2018, 07:11 AM   #69
NoKey
LQ Newbie
 
Registered: Jun 2018
Posts: 18

Rep: Reputation: Disabled
Quote:
Originally Posted by sndwvs View Post
yes errors are present and above I wrote that on console debug there is no login
Where did you write there should be no login on the debug console?
According to /etc/inittab of the rootfs there should be a login prompt on the serial port.

Quote:
Originally Posted by sndwvs View Post
the input can be made by connecting the monitor(hdmi/vga) and keyboard to the board (I connect via the DVI->HDMI adapter)
I connected the board to an HDMI monitor but got only a black screen and another monitor (one with VGA input) did not detect a signal on the VGA connector.
 
Old 06-08-2018, 02:15 PM   #70
sndwvs
Member
 
Registered: Aug 2014
Posts: 203

Original Poster
Rep: Reputation: Disabled
for login on the console serial debug
change the /etc/inittab line
s2:12345:respawn:/sbin/agetty -L ttyFIQ0 115200 vt100
on ttyS2
 
Old 06-09-2018, 07:26 PM   #71
sndwvs
Member
 
Registered: Aug 2014
Posts: 203

Original Poster
Rep: Reputation: Disabled
update images, fix debug serial console login
slack-current-arm-*_22May18-4.4.135-firefly_rk3288-build-20180610.img.tar.xz
 
Old 06-11-2018, 06:50 AM   #72
NoKey
LQ Newbie
 
Registered: Jun 2018
Posts: 18

Rep: Reputation: Disabled
Okay then, I got login prompt and logged in with the latest image!
I would like to install on the emmc but I's like to partition it beforehand and I'm not sure whether using "fdisk" on it would be safe, since it might overwrite addres 0x40 with the idbloader.
Do you have any ideas on that?

P.S. Like the ascii art on login.
 
Old 06-11-2018, 10:47 AM   #73
sndwvs
Member
 
Registered: Aug 2014
Posts: 203

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by NoKey View Post
Okay then, I got login prompt and logged in with the latest image!
I would like to install on the emmc but I's like to partition it beforehand and I'm not sure whether using "fdisk" on it would be safe, since it might overwrite addres 0x40 with the idbloader.
Do you have any ideas on that?

P.S. Like the ascii art on login.
thank you

for the transfer there is a setup script,
but if you want to break up in a particular way when using fdisk, simply specify Start 32768
 
Old 06-14-2018, 03:53 AM   #74
NoKey
LQ Newbie
 
Registered: Jun 2018
Posts: 18

Rep: Reputation: Disabled
I programmed the eMMMC with your setup program yesterday, but I had to do some rewrites to it as it does not seem to work well on a serial terminal.
The setup script also seems incapable of handling pre-partioned devices. I'll have to re-partition later, after shrinking the rootfs.
Shall I mail you patches of the fixes I've made when I have time?
 
Old 06-14-2018, 10:57 AM   #75
sndwvs
Member
 
Registered: Aug 2014
Posts: 203

Original Poster
Rep: Reputation: Disabled
yes, I would like to understand that this is not working, my testing showed a successful transfer of the system to the eMMC
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Where to find linux driver for Lexar Firefly? greenhelium Linux - Newbie 8 09-10-2007 04:18 PM
Calling all Firefly/Serinity fans! ZephyrXero General 2 02-02-2006 02:41 AM
Firefly BSD? Dankles *BSD 2 05-10-2005 02:20 PM
Smartdisk Firefly 20GB USB Travers Linux - Hardware 0 09-18-2004 02:27 PM
Firefly USBee novik4ne Linux - Hardware 2 08-22-2003 01:47 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware > Slackware - ARM

All times are GMT -5. The time now is 02:35 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration