| mralk3 |
04-02-2017 07:45 PM |
Rpi3 - kworker blocked for more than 120 seconds
Several months back I purchased a Raspberry Pi 3. Naturally I installed Slackware ARM -current to take advantage of hard float. I used the image from Dec 12 2016, sarpi3-installer_slackcurrent_fd0.img.xz. I have been very busy since then and never got around to using it. Today I decided to replace my old wireless router with the Rpi3. I updated the system packages to the latest -current. I also updated the kernel to 4.9.19-v7 using the rpi-update command.
Upon running sbopkg -r I noticed rsync timed out with an error:
Quote:
rsync error: timeout in data send/receive (code 30) at io.c(137) [sender=3.0.8]
|
In /var/log/syslog the following error is saved:
Quote:
Apr 2 14:50:07 rpi3 kernel: [ 5158.885646] INFO: task kworker/2:2:20316 blocked for more than 120 seconds.
Apr 2 14:50:07 rpi3 kernel: [ 5158.885658] Not tainted 4.9.19-v7+ #983
Apr 2 14:50:07 rpi3 kernel: [ 5158.885663] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Apr 2 14:50:07 rpi3 kernel: [ 5158.885729] [<807133c8>] (__schedule) from [<807138ec>] (schedule+0x50/0xa8)
Apr 2 14:50:07 rpi3 kernel: [ 5158.885745] [<807138ec>] (schedule) from [<805b5d28>] (__mmc_claim_host+0xb8/0x1cc)
Apr 2 14:50:07 rpi3 kernel: [ 5158.885759] [<805b5d28>] (__mmc_claim_host) from [<805b5e6c>] (mmc_get_card+0x30/0x34)
Apr 2 14:50:07 rpi3 kernel: [ 5158.885775] [<805b5e6c>] (mmc_get_card) from [<805be8fc>] (mmc_sd_detect+0x2c/0x80)
Apr 2 14:50:07 rpi3 kernel: [ 5158.885791] [<805be8fc>] (mmc_sd_detect) from [<805b8b30>] (mmc_rescan+0x1c8/0x38c)
Apr 2 14:50:07 rpi3 kernel: [ 5158.885810] [<805b8b30>] (mmc_rescan) from [<80136568>] (process_one_work+0x158/0x454)
Apr 2 14:50:07 rpi3 kernel: [ 5158.885828] [<80136568>] (process_one_work) from [<801368c8>] (worker_thread+0x64/0x568)
Apr 2 14:50:07 rpi3 kernel: [ 5158.885844] [<801368c8>] (worker_thread) from [<8013c7b0>] (kthread+0xec/0x104)
Apr 2 14:50:07 rpi3 kernel: [ 5158.885861] [<8013c7b0>] (kthread) from [<80108148>] (ret_from_fork+0x14/0x2c)
|
I realize this is related to the sd card but was unable to find any answers after googling for a bit.
Does anyone have some ideas as to what is causing this? |
