|
X Acceleration on ATI card & 2.6.16.17 kernel
Well, I've spent a whole bloody day trying to fix that X acceleration on my Slack 10.2 current , latest 2.6.16.17 kernel (it just came and I've already done at least 15 builds..) when I fix somthing , something else needs fixing..
I've read all the entire threads on this board regarding this subject,not to mention googling other boards and still getting headaches..:confused: Thanks cwwilson,old_fogie,shilo and other people I was reading through their posts. I'm confident enough to say that I've tried everything.. :study: The most surprising bit is that at first this X acceleration thread was looking too much hassle to me and I've managed to get it running in less than 15 mins on my 2.4.32 kernel,then I've upgraded it to fix other issus and it did the job nicely. I've tried so many things that I can't even remember all of them,mostly tried to follow all the suggestions till the last page from the X accel. thread by cwillson721 on this board. I would like to bring out to your attention some files and kindly ask for your opinion how to fix the bugger. Xorg.log.0 , xorg.conf, .config (my kernel conf) in that order, anything else just let me know Many Thanks in advance P.S. Please help me sleep tonight:) Xorg.log.0 |
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/GunterS:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X Window System Version 6.9.0 Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 6.9 Build Operating System: Linux 2.4.32 i686 [ELF] Current Operating System: Linux GunterS 2.6.16.17 #4 PREEMPT Wed Mar 15 07:13:00 GMT 2006 i686 Build Date: 02 May 2006 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 15 07:24:35 2006 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Simple Layout" (**) |-->Screen "aticonfig Screen 0" (0) (**) | |-->Monitor "aticonfig Monitor 0" (**) | |-->Device "ATI Graphics Adapter 0" (**) |-->Input Device "n52_mouse" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/TTF,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/CID,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/local/share/fonts" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.8 X.Org XInput driver : 0.5 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 0000,0000 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,2482 card 8086,4541 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:2: chip 8086,2487 card 8086,4541 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,248a card 8086,4541 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:5: chip 8086,2485 card 1013,5959 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,2486 card 14f1,5421 rev 02 class 07,03,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c66 card 1028,00d4 rev 01 class 03,00,00 hdr 00 (II) PCI: 02:00:0: chip 10b7,9200 card 1028,00d4 rev 78 class 02,00,00 hdr 00 (II) PCI: 02:01:0: chip 104c,ac42 card e000,0000 rev 00 class 06,07,00 hdr 82 (II) PCI: 02:01:1: chip 104c,ac42 card e800,0000 rev 00 class 06,07,00 hdr 82 (II) PCI: 02:01:2: chip 104c,8027 card 1028,00d4 rev 00 class 0c,00,10 hdr 80 (II) PCI: 07:00:0: chip 1033,0035 card 9710,0035 rev 43 class 0c,03,10 hdr 80 (II) PCI: 07:00:1: chip 1033,0035 card 9710,0035 rev 43 class 0c,03,10 hdr 00 (II) PCI: 07:00:2: chip 1033,00e0 card 9710,1906 rev 04 class 0c,03,20 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B] [2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [4] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B] [5] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B] [6] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B] [7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xf4000000 - 0xfbffffff (0x8000000) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0x88000000 - 0x8cffffff (0x5000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 3: bridge is at (2:1:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xf4000000 - 0xf5ffffff (0x2000000) MX[B] (II) Bus 3 prefetchable memory range: [0] -1 0 0x88000000 - 0x89ffffff (0x2000000) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 7: bridge is at (2:1:1), (2,7,10), BCTRL: 0x0500 (VGA_EN is cleared) (II) Bus 7 I/O range: [0] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] (II) Bus 7 non-prefetchable memory range: [0] -1 0 0xf6000000 - 0xf7ffffff (0x2000000) MX[B] (II) Bus 7 prefetchable memory range: [0] -1 0 0x8a000000 - 0x8bffffff (0x2000000) MX[B] (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 Lf [FireGL 9000] rev 1, Mem @ 0xe0000000/27, 0xfcff0000/16, I/O @ 0xc000/8, BIOS @ 0x80000000/17 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff (II) Active PCI resource ranges: [0] -1 0 0xf6002000 - 0xf60020ff (0x100) MX[B] [1] -1 0 0xf6001000 - 0xf6001fff (0x1000) MX[B] [2] -1 0 0xf6000000 - 0xf6000fff (0x1000) MX[B] [3] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B] [4] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B] [5] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B] [6] -1 0 0x8d000000 - 0x8d0003ff (0x400) MX[B] [7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [8] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B](B) [9] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B) [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [11] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [12] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B] [13] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [14] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B] [15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B] [17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [18] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [21] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B] [22] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B] [23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf6002000 - 0xf60020ff (0x100) MX[B] [1] -1 0 0xf6001000 - 0xf6001fff (0x1000) MX[B] [2] -1 0 0xf6000000 - 0xf6000fff (0x1000) MX[B] [3] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B] [4] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B] [5] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B] [6] -1 0 0x8d000000 - 0x8d0003ff (0x400) MX[B] [7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [8] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B](B) [9] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B) [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [11] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [12] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B] [13] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [14] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B] [15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B] [17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [18] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [21] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B] [22] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B] [23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf6002000 - 0xf60020ff (0x100) MX[B] [6] -1 0 0xf6001000 - 0xf6001fff (0x1000) MX[B] [7] -1 0 0xf6000000 - 0xf6000fff (0x1000) MX[B] [8] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B] [9] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B] [10] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B] [11] -1 0 0x8d000000 - 0x8d0003ff (0x400) MX[B] [12] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B](B) [14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B) [15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [19] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B] [20] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [21] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B] [22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [23] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B] [24] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [25] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [26] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [28] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B] [29] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B] [30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.9.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "synaptics" (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o (II) Module synaptics: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) LoadModule: "fglrx" (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 6.8.99.8, module version = 8.24.8 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 (II) LoadModule: "synaptics" (II) Reloading /usr/X11R6/lib/modules/input/synaptics_drv.o (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 (II) ATI Radeon/FireGL: The following chipsets are supported: RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967), MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66), RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960), RADEON 9200 (RV280 5961), RADEON 9000 (RV280 5962), RADEON 9200 SE (RV280 5964), MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63), FireGL 8800 (R200 5148), RADEON 8500 (R200 514C), RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242), RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151), RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51), MOBILITY RADEON 9600/9700 (M10/M11 4E50), MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148), RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153), FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155), RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B), MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60), RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63), FireGL V3100 (RV370 5B64), MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON X300 (M22 5461), MOBILITY RADEON X600 (M24 5462), MOBILITY FireGL V3100 (M22 5464), RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54), MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152), MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E), RADEON X800 SE (R420 4A4F), RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548), RADEON X800 PRO (R423 5549), RADEON X800 XT Platinum Edition (R423 554A), RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57), FireGL V7100 (R423 5550), FireGL V5100 (R423 5551), MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49), MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D), RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F), RADEON X850 XT Platinum Edition (R480 5D4D), RADEON X800 GTO (R480 5D4F), RADEON X850 XT (R480 5D52), RADEON X850 (R481 4B48), RADEON X850 XT (R481 4B49), RADEON X850 SE (R481 4B4A), RADEON X850 PRO (R481 4B4B), RADEON X850 XT Platinum Edition (R481 4B4C), MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B), FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49), RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B), |
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652), MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL, RADEON 9100 IGP (RS300 5834), RADEON 9000 PRO/9100 PRO IGP (RS350 7834), MOBILITY RADEON 9000/9100 IGP (RS300M 5835), RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42), RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955), RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975), RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62), RADEON X1800 (R520 7100), MOBILITY RADEON X1800 (M58 7101), MOBILITY RADEON X1800 (M58 7102), RADEON X1800 XT (R520 7108), RADEON X1800 PRO (R520 7109), RADEON X1800 SE (R520 710A), RADEON X1800 (R520 710B), RADEON X1800 (R520 710C), MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C), RADEON X1300 XT (RV515 7140), RADEON X1300 PRO (RV515 7142), MOBILITY RADEON X1400 (M54 7145), RADEON X1300 LE (RV515 7146), MOBILITY RADEON X1300 (M52 7149), MOBILITY RADEON X1300 (M52 714A), RADEON X1300 SE (RV515 714E), RADEON X1300 VE (RV515 715E), RADEON X1900 (R580 7240), RADEON X1900 (R580 7243), RADEON X1900 (R580 7244), RADEON X1900 (R580 7245), RADEON X1900 (R580 7246), RADEON X1900 (R580 7247), RADEON X1900 (R580 7248), RADEON X1900 (R580 7249), RADEON X1900 (R580 724A), RADEON X1900 (R580 724B), RADEON X1900 (R580 724C), RADEON X1900 (R580 724D), RADEON X1900 (R580 724E), RADEON X1900 (R580 724F), RADEON X1600 XT (RV530 71C0), RADEON X1600 PRO (RV530 71C2), MOBILITY RADEON X1600 (M56 71C5), RADEON (RV530 LE 71C6), RADEON (RV530 VE 71CE), RADEON (RV530 SE 71DE) (II) Primary Device is: PCI 01:00:0 (II) ATI Proprietary Linux Driver Version Identifier:8.24.8 (II) ATI Proprietary Linux Driver Release Identifier: LGDr8.24g1 (II) ATI Proprietary Linux Driver Build Date: Apr 11 2006 13:36:57 (II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.24.1-driver-lnx-259766 (--) Chipset MOBILITY RADEON 9000 (M9 4C66) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf6002000 - 0xf60020ff (0x100) MX[B] [6] -1 0 0xf6001000 - 0xf6001fff (0x1000) MX[B] [7] -1 0 0xf6000000 - 0xf6000fff (0x1000) MX[B] [8] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B] [9] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B] [10] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B] [11] -1 0 0x8d000000 - 0x8d0003ff (0x400) MX[B] [12] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B](B) [14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B) [15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [19] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B] [20] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [21] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B] [22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [23] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B] [24] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [25] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [26] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [28] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B] [29] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B] [30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) fglrx(0): pEnt->device->identifier=0x82211f8 (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf6002000 - 0xf60020ff (0x100) MX[B] [6] -1 0 0xf6001000 - 0xf6001fff (0x1000) MX[B] [7] -1 0 0xf6000000 - 0xf6000fff (0x1000) MX[B] [8] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B] [9] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B] [10] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B] [11] -1 0 0x8d000000 - 0x8d0003ff (0x400) MX[B] [12] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B](B) [14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B) [15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [22] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B] [23] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [24] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B] [25] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [26] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B] [27] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [28] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [29] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [31] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B] [32] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B] [33] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [R200PreInit] === begin, [s] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.9.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.8 (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (==) fglrx(0): Gamma Correction for I is 0x06419064 (==) fglrx(0): Gamma Correction for II is 0x06419064 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (--) fglrx(0): Chipset: "MOBILITY RADEON 9000 (M9 4C66)" (Chipset = 0x4c66) (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x00d4) (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000 (--) fglrx(0): MMIO registers at 0xfcff0000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.8 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 2.0 (II) fglrx(0): VESA VBE Total Mem: 65536 kB (II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON M9 (II) fglrx(0): VESA VBE OEM Software Rev: 1.0 (II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: M9 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Reloading /usr/X11R6/lib/modules/linux/libdrm.so drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "fglrx" (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 6.8.99.8, module version = 8.24.8 ABI class: X.Org Server Extension, version 0.2 (--) fglrx(0): VideoRAM: 65536 kByte, Type: DDR SGRAM / SDRAM (II) fglrx(0): AGP card detected (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.so (II) Module ddc: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) fglrx(0): Connected Display1: LCD on internal LVDS (II) fglrx(0): Display1: No EDID information from DDC. (II) fglrx(0): Derived EDID from BIOS and internal tables for Display1: (II) fglrx(0): Display1 EDID data --------------------------- (II) fglrx(0): Manufacturer: MS_ Model: 6 Serial#: 0 (II) fglrx(0): Year: 1990 Week: 0 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) fglrx(0): Sync:Serration on. V.Sync Pulse req. if CompSync or SyncOnGreen (II) fglrx(0): Max H-Image Size [cm]: horiz.: 40 vert.: 30 (II) fglrx(0): Gamma: 1.00 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000 (II) fglrx(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433 (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 60 vid: 16453 (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481 (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497 (II) fglrx(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 160.0 MHz Image Size: 0 x 0 mm (II) fglrx(0): h_active: 1600 h_sync: 1656 h_sync_end 1848 h_blank_end 2112 h_border: 0 (II) fglrx(0): v_active: 1200 v_sync: 1200 v_sync_end 1200 v_blanking: 1250 v_border: 0 (II) fglrx(0): End of Display1 EDID data -------------------- (WW) fglrx(0): Specified desktop setup not supported: 8 (II) fglrx(0): Primary Controller - LCD on internal LVDS (II) fglrx(0): Internal Desktop Setting: 0x00000004 (II) fglrx(0): POWERplay version 3. 1 power state available: (II) fglrx(0): 1. 250/200MHz @ 60Hz [enable load balancing] (==) fglrx(0): Qbs disabled (==) fglrx(0): FAST_SWAP disabled (==) fglrx(0): PseudoColor visuals disabled (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (==) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total of 14 modes found for primary display. (--) fglrx(0): Virtual size is 1600x1200 (pitch 1600) (**) fglrx(0): *Mode "1600x1200": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "1600x1200" 160.00 1600 1656 1848 2112 1200 1201 1204 1250 (**) fglrx(0): Default mode "1280x1024": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "1280x1024" 160.00 1280 1496 1688 2112 1024 1113 1116 1250 (**) fglrx(0): Default mode "1024x768": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "1024x768" 160.00 1024 1368 1560 2112 768 985 988 1250 (**) fglrx(0): Default mode "848x480": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "848x480" 160.00 848 1280 1472 2112 480 841 844 1250 (**) fglrx(0): Default mode "800x600": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "800x600" 160.00 800 1256 1448 2112 600 901 904 1250 (**) fglrx(0): Default mode "720x576": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "720x576" 160.00 720 1216 1408 2112 576 889 892 1250 (**) fglrx(0): Default mode "720x480": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "720x480" 160.00 720 1216 1408 2112 480 841 844 1250 (**) fglrx(0): Default mode "640x480": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x480" 160.00 640 1176 1368 2112 480 841 844 1250 (**) fglrx(0): Default mode "640x400": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x400" 160.00 640 1176 1368 2112 400 801 804 1250 (**) fglrx(0): Default mode "640x350": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x350" 160.00 640 1176 1368 2112 350 776 779 1250 (**) fglrx(0): Default mode "512x384": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "512x384" 160.00 512 1112 1304 2112 384 793 796 1250 (**) fglrx(0): Default mode "400x300": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "400x300" 160.00 400 1056 1248 2112 150 901 904 1250 doublescan (**) fglrx(0): Default mode "320x240": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "320x240" 160.00 320 1016 1208 2112 120 841 844 1250 doublescan (**) fglrx(0): Default mode "320x200": 160.0 MHz (scaled from 0.0 MHz), 75.8 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "320x200" 160.00 320 1016 1208 2112 100 801 804 1250 doublescan (--) fglrx(0): Display dimensions: (400, 300) mm (--) fglrx(0): DPI set to (101, 101) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.9.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.8 (==) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 6.9.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.8 (==) fglrx(0): HPV inactive (==) fglrx(0): FSAA enabled: NO (==) fglrx(0): FSAA Gamma enabled (==) fglrx(0): FSAA Multisample Position is fix (==) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/X11R6/lib/modules/linux/libfglrxdrm.so (II) fglrx(0): Depth moves disabled by default (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): cpuFlags: 0x8000001d (==) fglrx(0): cpuSpeedMHz: 0x00000898 (==) fglrx(0): OpenGL ClientDriverName: "atiogl_a_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (==) fglrx(0): EnablePrivateBackZ = NO (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xfcff0000 - 0xfcffffff (0x10000) MX[B] [1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xf6002000 - 0xf60020ff (0x100) MX[B] [8] -1 0 0xf6001000 - 0xf6001fff (0x1000) MX[B] [9] -1 0 0xf6000000 - 0xf6000fff (0x1000) MX[B] [10] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B] [11] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B] [12] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B] [13] -1 0 0x8d000000 - 0x8d0003ff (0x400) MX[B] [14] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [15] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B](B) [16] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B) [17] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [21] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [24] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [25] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B] [26] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [27] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B] [28] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [29] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B] [30] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [31] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [32] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [34] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B] [35] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B] [36] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) fglrx(0): UMM Bus area: 0xe0954000 (size=0x036ac000) (II) fglrx(0): UMM area: 0xe0954000 (size=0x036ac000) (II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8 (II) fglrx(0): detected X.org 7.0.0.0 (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "fglrx" (II) fglrx(0): [drm] drmOpen failed (EE) fglrx(0): DRIScreenInit failed! (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* * (II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x04000000 (==) fglrx(0): Write-combining range (0xe0000000,0x4000000) (II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption) (==) fglrx(0): Backing store disabled (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using hardware cursor (scanline 1200) (II) fglrx(0): Largest offscreen area available: 1600 x 6988 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (II) fglrx(0): Acceleration enabled (II) fglrx(0): Direct rendering disabled (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "IMPS/2" (**) n52_mouse: Device: "/dev/input/mice" (**) n52_mouse: Protocol: "IMPS/2" (**) Option "CorePointer" (**) n52_mouse: Core Pointer (**) Option "Buttons" "5" (==) n52_mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) n52_mouse: ZAxisMapping: buttons 4 and 5 (**) n52_mouse: Buttons: 9 (II) Synaptics touchpad driver version 0.14.4 (1404) (--) Mouse1 auto-dev sets device to /dev/input/event3 (**) Option "Device" "/dev/input/event3" (**) Option "SHMConfig" "on" (**) Option "LeftEdge" "1700" (**) Option "RightEdge" "5300" (**) Option "TopEdge" "1700" (**) Option "BottomEdge" "4200" (**) Option "FingerLow" "25" (**) Option "FingerHigh" "30" (**) Option "MaxTapTime" "180" (**) Option "MaxTapMove" "220" (**) Option "VertScrollDelta" "100" (--) Mouse1 touchpad found (**) Option "AlwaysCore" (**) Mouse1: always reports core events (**) Option "CoreKeyboard" (**) Keyboard1: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard1: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard1: XkbRules: "xorg" (**) Option "XkbModel" "inspiron" (**) Keyboard1: XkbModel: "inspiron" (**) Option "XkbLayout" "gb" (**) Keyboard1: XkbLayout: "gb" (**) Option "CustomKeycodes" "off" (**) Keyboard1: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) XINPUT: Adding extended input device "n52_mouse" (type: MOUSE) Synaptics DeviceInit called SynapticsCtrl called. (II) n52_mouse: ps2EnableDataReporting: succeeded Synaptics DeviceOn called (--) Mouse1 auto-dev sets device to /dev/input/event3 (**) Option "Device" "/dev/input/event3" (--) Mouse1 touchpad found Could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list! |
Section "ServerLayout"
# The Identifier line must be present # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". #Screen "aticonfig Screen 1" Above "aticonfig Screen 0" Identifier "Simple Layout" Screen 0 "aticonfig Screen 0" 0 0 InputDevice "n52_mouse" "CorePointer" InputDevice "Mouse1" "AlwaysCore" InputDevice "Keyboard1" "CoreKeyboard" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/TTF" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/local/share/fonts" EndSection Section "Module" # This loads the DBE extension module. # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. # This loads the font modules # This loads the GLX module # Load "dri" Load "dbe" # Double buffer extension SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection Load "type1" # Load "speedo" Load "freetype" # Load "xtt" Load "glx" # This loads the DRI module Load "dri" Load "synaptics" EndSection Section "InputDevice" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc105" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for Xorg # Option "XkbRules" "xorg" # Option "XkbModel" "pc105" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) Option "XkbRules" "xorg" Option "XkbModel" "inspiron" Option "XkbLayout" "gb" EndSection Section "InputDevice" # Identifier and driver # the following line. #?? Option "Protocol" "Xqueue" # Mouse-speed setting for PS/2 mouse. # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5, # horizontal wheel to buttons 6 & 7. Change if your mouse has more than # 3 buttons and you need to map the wheel to different button ids to avoid # conflicts. # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" #Section "InputDevice" # Identifier "Synaptics Mouse" Identifier "Mouse1" Driver "synaptics" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "LeftEdge" "1700" Option "RightEdge" "5300" Option "TopEdge" "1700" Option "BottomEdge" "4200" Option "FingerLow" "25" Option "FingerHigh" "30" Option "MaxTapTime" "180" Option "MaxTapMove" "220" Option "VertScrollDelta" "100" Option "MinSpeed" "0.09" Option "MaxSpeed" "0.18" Option "AccelFactor" "0.0015" Option "SHMConfig" "on" EndSection Section "InputDevice" # Option "Device" "/dev/mouse" Identifier "n52_mouse" Driver "mouse" Option "Device" "/dev/input/mice" # Option "Device" "/dev/input/mice" mouse0" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "Protocol" "IMPS/2" EndSection Section "Monitor" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. Identifier "dell" HorizSync 60.0 - 60.0 VertRefresh 60.0 - 60.0 EndSection Section "Monitor" Identifier "aticonfig Monitor 0" EndSection Section "Device" # unsupported card Identifier "rad" Driver "fglrx" VideoRam 65536 Option "XVideo" "On" Option "MonitorLayout" "LFP,CRT" Option "DevicePresence" "On" # Insert Clocks lines here if appropriate EndSection Section "Device" Identifier "ATI Graphics Adapter 0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" # Subsection "Display" # Depth 16 # Modes "1280x1024" "1024x768" "800x600" "640x480" # ViewPort 0 0 # EndSubsection # was 1 Identifier "Screen 0" Device "rad" Monitor "dell" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 8 Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "aticonfig Screen 0" Device "ATI Graphics Adapter 0" Monitor "aticonfig Monitor 0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1600x1200" EndSubSection EndSection Section "DRI" Mode 0666 EndSection |
it's already too much anyway, so if you'd like to see the .config file please lemme know. Thanks guys.
|
To be honest with you, I can install any version of ATI drivers on slack 10.2 with kernels all kernels from the stock one
to the 2.15 series. I can't get kernels in the 2.16 series to run right, but they do go in. For slack current, I get xorg version errors after installing any drivers. I truly believe that there is either a driver bug in ATI for the higher kernels, or quite simply the version on the web was not tested on these newer kernels, or there is a bug in slack 10.2 and for slack current from 2 weeks ago, well it's beta so it's to be expected for a hitch to be there. I can tell you that I put suse 10.2 gm in and the latest kerenels from ATI worked on that. So I'm starting to think it's really a slack 10.2 and current issue for these drivers. edit: but i was just testing suse, i run slack and look forward to slack 11 but i'm new to linux and old fart what do i know. :D |
Worked!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank you very much old_fogie !!!!!!
You're a an Xaccelator_GOD PAL!!!!!!!! it worked straight after re-installing the ati driver on the 2.6.15 kernel !!!!!!!!!!!!!!!!!!!!! So for all people trying with the current ATI Driver, in ordder to work use 2.6.15 kernel It's also good to know that I've been doing something right. Again thank you very much for the support on my threads pal. It is much appreciated. I'm off to try with the 2.6.15.7 kernel :p BTW my firewall script from www.projectfiles.com/firewall does not let me to access the internet on kernel <2.6.17(yep the one that came last night-bloody weird is this linux world if you ask me :) ) Thanks old_fogie! |
Good to hear. :D
About your internet firewall issue. I got issues on newer kernels too. I suspect, it is because they are implementing ipv6 hard and heavy into these new kernels now more and more. Maybe? and I'm really only guessing here, no tests, just outta my backside, maybe the slack net scripts might need some tweaking to work with IPV6? |
Yes atidriver has a problem with 2.16.16.x kernel series click here
If anyone has 2.6.15.series generic kernel(precompiled) please upload it and give e its link.I wanna play ut2004:) I only have last generic kernel from current testing dir |
fyi I got the 2.6.16.19 kernel to work with latest ATI drivers on slack 10.2
|
Quote:
|
I'm using kernel 2.6.16.19 and the fglrx_6_8_0-8.25.18-1.i386.rpm which were the latest kernel and video drivers
available at the time possible. I have full direct rendering. I'm getting 4400 FPS now in about a 6" diagonal window w/a resolution of 1200x900. If you recall, I used to get around 3000 fps when I used Mepis and when I first started messing with DRI. I have had two major video melt downs since installing this kernel & video combination. But nothing was logged, and the pc just froze. CTRL+Alt+Backspace, CTRL+ALT+F6 or CTRL+ALT+DEL did nothing. I suspect I still have issues from when my power supply started to go on fire. Remember I am highly overclocked so my results are not typical. I'm going to be tweak my kernel tho from the stock that Mr. V has that I'm running, and put in temperature sensor stuff APM for my power button on my tower.Also looking to strip out more stuff that I don't use in this kernel. Altho, I have to say with this kernel and video setup, this pc has never been this fast in linux before, ever! edit: Oh i think you were asking what was my success. Well, I think it was the fact that ATI just issued these new drivers this month. The last set of drivers ATI had on the web, I could not use any kernel above 2.6.10 in slackware using the method of installation that I sent to you before. Now with these new ATI drivers I can use the installation method I previously submitted I can use a later released kernel and get DRI. |
| All times are GMT -5. The time now is 02:17 PM. |