why video files are not playing

ilnli · 03-22-2005, 01:54 PM

this is the output of my dmesg and lsmod command

Code:

root@DARKSTAR:/proc# dmesg
Linux version 2.4.26 (root@tree) (gcc version 3.3.4) #6 Mon Jun 14 19:07:27 PDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007bfc000 (usable)
 BIOS-e820: 0000000007bfc000 - 0000000007bff000 (ACPI data)
 BIOS-e820: 0000000007bff000 - 0000000007c00000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
123MB LOWMEM available.
On node 0 totalpages: 31740
zone(0): 4096 pages.
zone(1): 27644 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Slackware ro root=307
Initializing CPU#0
Detected 1800.167 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3591.37 BogoMIPS
Memory: 122340k/126960k available (1844k kernel code, 4232k reserved, 618k data, 120k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
CPU:             Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 1.80GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1060, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1039/0962] at 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xf0000000, mapped to 0xc880d000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at cb18:0004
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:DMA
hda: ST340015A, ATA DISK drive
blk: queue c03b3360, I/O limit 4095Mb (mask 0xffffffff)
hdd: ASUS CD-S520/A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdd: attached ide-cdrom driver.
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  2056.000 MB/sec
   32regs    :  1296.000 MB/sec
   pIII_sse  :  2325.600 MB/sec
   pII_mmx   :  2074.000 MB/sec
   p5_mmx    :  2051.600 MB/sec
raid5: using function: pIII_sse (2325.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,7)) ...
for (ide0(3,7))
ide0(3,7):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 257000k swap-space (priority -1)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 90M
agpgart: Detected SiS 650 chipset
agpgart: AGP aperture is 4M @ 0xef000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
ide0(3,2):Using r5 hash to sort names
NTFS driver v1.1.22 [Flags: R/O MODULE]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ttySHSF0 at I/O 0x8400 (irq = 10) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2004)
0000006.098: <7>^^^^^ SPIKE_NOT_FOUND ^^^^^^ LoopBackSpikeThreshold=-17000
sis900.c: v1.08.06 9/24/2002
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 5, 00:0c:6e:6f:b3:24.
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 9, pci mem c8ca9000
usb.c: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 00:03.3
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-ohci.c: USB OHCI at membase 0xc8cb1000, IRQ 9
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xc8cb3000, IRQ 9
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
intel8x0_measure_ac97_clock: measured 49868 usecs
intel8x0: clocking to 48000
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 17:55:05 Jun 13 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
device lo entered promiscuous mode
root@DARKSTAR:/proc#

Code:

root@DARKSTAR:/proc# lsmod
Module                  Size  Used by    Tainted: P
ppp_deflate             3256   1  (autoclean)
zlib_deflate           18328   0  (autoclean) [ppp_deflate]
bsd_comp                4344   0  (autoclean)
ppp_async               7392   1  (autoclean)
ppp_generic            19492   3  (autoclean) [ppp_deflate bsd_comp ppp_async]
slhc                    4976   1  (autoclean) [ppp_generic]
snd-pcm-oss            37736   0
snd-mixer-oss          12504   0  [snd-pcm-oss]
snd-intel8x0           18924   1
snd-ac97-codec         49500   0  [snd-intel8x0]
gameport                1420   0  [snd-intel8x0]
snd-pcm                56072   0  [snd-pcm-oss snd-intel8x0]
snd-timer              13604   0  [snd-pcm]
snd-page-alloc          6328   0  [snd-intel8x0 snd-pcm]
snd-mpu401-uart         3200   0  [snd-intel8x0]
snd-rawmidi            12740   0  [snd-mpu401-uart]
snd-seq-device          3888   0  [snd-rawmidi]
snd                    30852   1  [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore               3460   4  [snd]
usb-ohci               19240   0  (unused)
ehci-hcd               17580   0  (unused)
sis900                 12396   0  (unused)
crc32                   2880   0  [sis900]
hsfpcibasic2           41228   2
hsfserial              29736   2  [hsfpcibasic2]
hsfengine            1111540   0  [hsfserial]
hsfosspec              58564   2  [hsfpcibasic2 hsfserial hsfengine]
usbcore                59308   1  [usb-ohci ehci-hcd hsfosspec]
hsfsoar                53320   0  [hsfpcibasic2]
ntfs                   51424   2  (autoclean)
ide-scsi                9328   0
agpgart                43940   0  (unused)
root@DARKSTAR:/proc#

now when ever I play any video file (e.g; mpg, mpeg, avi etc) all my video players (e.g; gxine) don't do anything they crash or only show me blue screen without any video display, tell me is there a problem with my driver of mother board or there is some other problem. my mother board is of asus and there vga card is built in.

tank728 · 03-22-2005, 02:09 PM

You need to get codecs. You can download some codecs from
http://www.mplayerhq.hu. Once you do that, you will need to know
where to place the codecs. I believe by default gxine reads codecs
from /usr/lib/win32, so I would place the codecs there.

I know that by default mplayer reads from /usr/local/lib/codecs. So
to satisfiy the two, you can put the codecs in /usr/local/lib/codecs,
and then just create a symlink from /usr/lib/win32 pointing to
/usr/local/lib/codecs.

Good Luck

-tank

ilnli · 03-23-2005, 01:17 PM

this site u referred me is closed do u any other?

keefaz · 03-23-2005, 01:41 PM

There is a link, look at the last line

ilnli · 03-24-2005, 10:09 AM

this is my mplayer output

Code:

root@DARKSTAR:~/MPlayer-1.0pre6a# mplayer /root/donkeyInc/Accident\ Faces\ of\ Death\ -\ Sniper\ shot\ to\ head.mpeg
MPlayer 1.0pre6-3.3.4 (C) 2000-2004 MPlayer Team
CPU: Intel Pentium 4/Xeon Willamette (Family: 8, Stepping: 3)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2


Playing /root/donkeyInc/Accident Faces of Death - Sniper shot to head.mpeg.
MPEG-PS file format detected.
VIDEO:  MPEG1  352x240  (aspect 1)  24.000 fps  479.6 kbps (60.0 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 12000->176400 (96.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
open: No such device
vo_mga: Couldn't open /dev/mga_vid
open: No such device
vo_mga: Couldn't open /dev/mga_vid
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0" => local display)
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 352 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 352x240 => 352x240 Planar YV12
New_Face failed. Maybe the font path is wrong. 2 ??% ??% ??,?% 1 0
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
X11 error: BadAlloc (insufficient resources for operation)?,?% 5 0


MPlayer interrupted by signal 6 in module: vo_check_events
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
  won't help unless you provide this information when reporting a possible bug.
root@DARKSTAR:~/MPlayer-1.0pre6a#

can anyone suggest me what to do?

xgreen · 03-24-2005, 10:45 AM

maybe this related to yr prob....

from http://xinehq.de/index.php/faq

I only see a blue (or green or black) video image most of the time.

You are either watching a very boring video (just kidding) or you are suffering from a bug in the Xorg 6.7 implementation of X11.

The workaround is to add the line

Option "XaaNoOffscreenPixmaps"

in the Device section of your X server configuration (usually /etc/X11/xorg.conf or /etc/X11/XF86Config).

ilnli · 03-24-2005, 01:04 PM

i am able to play some mpg file now but on other mpg files it says

X11 error: BadAlloc (insufficient resources for operation)?,?% 5 0