HI!

i have this webcam : 046d:0870 Logitech, Inc. QuickCam Express
that line is taked from lsusb

dmesg doesnt show anything, and lsmod neither
i´ve installed alienbob package ; gspcav1 and add the line blacklist gspca_main to blacklist from modprobe, but nothing happens


http://www.kernel.org/doc/Documentat...inux/gspca.txt
here says that the module is
stv06xx 046d:0870 Dexxa WebCam USB
but i cant find it in my slack12.2 ( 2.6.27.7-smp with initrd)

video0 not exist or is not created

anyone??

thanx a lot

english vocabulary, where?? sorry

so you get output from lsusb but not from dmesg when you plug in the webcam?
are you using the precompiled generic-slack-kernel? the module stv06xx should be included in the huge-slack-kernel.
anyhow you could check out
http://www.qbik.ch/usb/devices/searc...ttern=Quickcam
and
http://www.quickcamteam.net/
hope this helps
m.

hi again

i try to use the huge-smp, but the module stv06xx doesnt there
the qc-usb module (quickcam) i've already try it, but i cant compile it and create the .ko
the module stv06xx should be included in the huge-slack-kernel???

dmesg view my cam, sorry

usb 3-2: New USB device found, idVendor=046d, idProduct=0870
usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: Product: Camera
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.

maybe the module is not inlcuded in the 12.2 slackware huge-kernel. download and install kernel-huge-2.6.29.6 from the slackware repo or compile your own kernel.
but according to
http://forums.quickcamteam.net/showthread.php?tid=838
there still might be some problems depending on the sensor of your webcam.

greetings
m.

doesnt works.......i'll wait for slack13, maybe...........

hi, i dont know if this will help but i installed a "Logitech QuickCam Communication MP for Business"

i'm using slackware 12, kernel 2.6.27, i made sure uvc was compiled under kernel,
Device Drivers, Multimedia devices, Video capture adapters, V4L USB devices, <M> USB Video Class (UVC)

dmesg
uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
input: UVC Camera (046d:09a1) as /class/input/input4
usb 1-2: USB disconnect, address 3
usb 1-2: new full speed USB device using ohci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
input: UVC Camera (046d:09a1) as /class/input/input5

lsusb
Bus 001 Device 004: ID 046d:09a1 Logitech, Inc.

lsmod | grep uvc
uvcvideo 57096 0
compat_ioctl32 5120 1 uvcvideo
videodev 36736 1 uvcvideo
v4l1_compat 17924 2 uvcvideo,videodev

i installed mjpg-streamer, followed documentation then

to view a single JPEG in a browser 127.0.0.1:8080/?action=snapshot