unable to start strongSwan -- fatal errors in config
When I try to start ipsec to load new configuration i get:
Starting strongSwan 4.3.5 IPsec [starter]... /etc/ipsec.conf:41: unknown keyword 'plutoopts' ["--interface=eth0"] unable to start strongSwan -- fatal errors in config who can give me something advise, thanks! my configure file was below: 1# ipsec.conf - strongSwan IPsec configuration file 2 3# basic configuration 4config setup 5 # plutodebug=all 6 # crlcheckinterval=600 7 # strictcrlpolicy=yes 8 # cachecrls=yes 9 # nat_traversal=yes 10 # charonstart=no 11 # plutostart=no 12 13# Add connections here. 14 15# Sample VPN connections 16 17#conn sample-self-signed 18# left=%defaultroute 19# leftsubnet=10.1.0.0/16 20# leftcert=selfCert.der 21# leftsendcert=never 22# right=192.168.0.2 23# rightsubnet=10.2.0.0/16 24# rightcert=peerCert.der 25# auto=start 26 27#conn sample-with-ca-cert 28# left=%defaultroute 29# leftsubnet=10.1.0.0/16 30# leftcert=myCert.pem 31# right=192.168.0.2 32# rightsubnet=10.2.0.0/16 33# rightid="C=CH, O=Linux strongSwan CN=peer name" 34# keyexchange=ikev2 35# auto=start 36config setup 37 virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 38 nat_traversal=yes 39 protostack=netkey 40 oe=no 41 plutoopts="--interface=eth0" 42conn L2TP-PSK 43 authby=secret 44 pfs=no 45 auto=add 46 keyingtries=3 47 dpddelay=30 48 dpdtimeout=120 49 dpdaction=clear 50 rekey=yes 51 ikelifetime=8h 52 keylife=1h 53 type=transport 54 left=192.168.1.100 55 leftnexthop=%defaultroute 56 leftprotoport=17/1701 57 right=68.68.32.79 58 rightprotoport=17/170 |
|
All times are GMT -5. The time now is 02:03 PM. |