Going through some of the oldest issue/feature requests of inxi, next in line is bluetooth report, which looks/behaves similar to -n advanced networking report.
As always: pinxi -U
if you have pinxi installed already, that being the development version of inxi, and
cd /usr/local/bin && sudo wget -O pinxi smxi.org/pinxi && sudo chmod +x pinxi
to install it.
All feedback, posted samples of the output, appreciated since I want to get this one out the door within a day or two to meet certain distro freeze deadlines.
Code:
pinxi -Eay
Bluetooth:
Device-1: Broadcom BCM2045B (BDC-2.1) type: USB driver: btusb v: 0.8
bus ID: 1-1.4:6 chip ID: 0a5c:217f class ID: fe01 serial: <filter>
Report: ID: hci1 state: up running bt-v: 2.0 lmp-v: 3.0 sub-v: 4203
hci-v: 3.0 rev: 2ec address: <filter>
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch hold sniff park
link-mode: slave accept
Device-2: Broadcom BCM20702A0 Bluetooth 4.0 type: USB driver: btusb v: 0.8
bus ID: 2-1.1:4 chip ID: 0a5c:21e8 class ID: fe01 serial: <filter>
Report: ID: hci0 state: up running bt-v: 2.1 lmp-v: 4.0 sub-v: 220e
hci-v: 4.0 rev: 1000 address: <filter>
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
link-mode: slave accept
## using -y1 single key: value pair per line mode:
pinxi -Eay1
Bluetooth:
Device-1: Broadcom BCM2045B (BDC-2.1)
type: USB
driver: btusb
v: 0.8
bus ID: 1-1.4:6
chip ID: 0a5c:217f
class ID: fe01
serial: <filter>
Report:
ID: hci1
state: up running
bt-v: 2.0
lmp-v: 3.0
sub-v: 4203
hci-v: 3.0
rev: 2ec
address: <filter>
Info:
acl-mtu: 1021:8
sco-mtu: 64:1
link-policy: rswitch hold sniff park
link-mode: slave accept
Device-2: Broadcom BCM20702A0 Bluetooth 4.0
type: USB
driver: btusb
v: 0.8
bus ID: 2-1.1:4
chip ID: 0a5c:21e8
class ID: fe01
serial: <filter>
Report:
ID: hci0
state: up running
bt-v: 2.1
lmp-v: 4.0
sub-v: 220e
hci-v: 4.0
rev: 1000
address: <filter>
Info:
acl-mtu: 1021:8
sco-mtu: 64:1
link-policy: rswitch sniff
link-mode: slave accept
