LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 09-17-2007, 12:20 PM   #1
phodopus
Member
 
Registered: Aug 2006
Location: Belgium
Distribution: Slackware 13.0
Posts: 62

Rep: Reputation: 15
Slackware 12 and my partitions --> no good friends!


I'm using Slackware 12.0 on a "Dell Vostro 1000" laptop.

This is my /etc/fstab:

Code:
/dev/sda5        swap             swap        defaults         0   0
/dev/sda3        /                ext3        defaults         1   1
/dev/sda1        /H:              ntfs        ro               1   0
/dev/sda2        /C:              ntfs        ro               1   0
/dev/sda6        /G:              ntfs        ro               1   0
/dev/cdrom      /mnt/cdrom       auto        noauto,owner,ro  0   0
/dev/fd0         /mnt/floppy      auto        noauto,owner     0   0
devpts           /dev/pts         devpts      gid=5,mode=620   0   0
proc             /proc            proc        defaults         0   0
And here's my dmesg:

Code:
root@user:~# dmesg
 ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jun 19 2007 15:21:53) installed
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie02]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc8000000, mapped to 0xf8d00000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:51a0
vesafb: pmi: set display start = c00c5234, set palette = c00c5280
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Switched to high resolution mode on CPU 0
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SB600_PATA: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
SB600_PATA: chipset revision 0
SB600_PATA: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.11
Copyright(c) 2004-2006 Emulex.  All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
        with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
st: Version 20070203, fixed bufsize 32768, s/g segs 256
ahci 0000:00:12.0: version 2.1
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xf8ce2100 ctl 0x00000000 bmdma 0x00000000 irq 11
ata2: SATA max UDMA/133 cmd 0xf8ce2180 ctl 0x00000000 bmdma 0x00000000 irq 11
ata3: SATA max UDMA/133 cmd 0xf8ce2200 ctl 0x00000000 bmdma 0x00000000 irq 11
ata4: SATA max UDMA/133 cmd 0xf8ce2280 ctl 0x00000000 bmdma 0x00000000 irq 11
scsi2 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHW2120BH, 00850012, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi3 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi4 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 0085 PQ: 0 ANSI: 5
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 2:0:0:0: Attached scsi disk sda
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
usbmon: debugfs is not available
ACPI: Unable to derive IRQ for device 0000:00:13.5
ACPI: PCI Interrupt 0000:00:13.5[D]: no GSI - using IRQ 11
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 11, io mem 0xc0004400
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0005000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: Unable to derive IRQ for device 0000:00:13.1
ACPI: PCI Interrupt 0000:00:13.1[B]: no GSI - using IRQ 11
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0006000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: Unable to derive IRQ for device 0000:00:13.2
ACPI: PCI Interrupt 0000:00:13.2[C]: no GSI - using IRQ 11
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 11, io mem 0xc0007000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: Unable to derive IRQ for device 0000:00:13.3
ACPI: PCI Interrupt 0000:00:13.3[B]: no GSI - using IRQ 11
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 11, io mem 0xc0008000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: Unable to derive IRQ for device 0000:00:13.4
ACPI: PCI Interrupt 0000:00:13.4[C]: no GSI - using IRQ 11
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 11, io mem 0xc0009000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    749 MB/s
raid6: int32x2    682 MB/s
raid6: int32x4    601 MB/s
raid6: int32x8    419 MB/s
raid6: mmxx1     1448 MB/s
raid6: mmxx2     2725 MB/s
raid6: sse1x1    1442 MB/s
raid6: sse1x2    2401 MB/s
raid6: sse2x1    2477 MB/s
raid6: sse2x2    3362 MB/s
raid6: using algorithm sse2x2 (3362 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  5460.000 MB/sec
raid5: using function: pIII_sse (5460.000 MB/sec)
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 344k freed
Linux agpgart interface v0.102 (c) Dave Jones
sd 2:0:0:0: Attached scsi generic sg0 type 0
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03cb591>] kobject_shadow_add+0x101/0x1a0
 [<c01375a8>] mod_sysfs_setup+0x18/0xb0
 [<c0138907>] sys_init_module+0x1147/0x15d0
 [<c0103ec0>] syscall_call+0x7/0xb
 =======================
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03cb591>] kobject_shadow_add+0x101/0x1a0
 [<c01375a8>] mod_sysfs_setup+0x18/0xb0
 [<c0138907>] sys_init_module+0x1147/0x15d0
 [<c0103ec0>] syscall_call+0x7/0xb
 =======================
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03cb591>] kobject_shadow_add+0x101/0x1a0
 [<c01375a8>] mod_sysfs_setup+0x18/0xb0
 [<c0138907>] sys_init_module+0x1147/0x15d0
 [<c0103ec0>] syscall_call+0x7/0xb
 =======================
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03cb591>] kobject_shadow_add+0x101/0x1a0
 [<c01375a8>] mod_sysfs_setup+0x18/0xb0
 [<c0138907>] sys_init_module+0x1147/0x15d0
 [<c0103ec0>] syscall_call+0x7/0xb
 =======================
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03cb591>] kobject_shadow_add+0x101/0x1a0
 [<c01375a8>] mod_sysfs_setup+0x18/0xb0
 [<c0138907>] sys_init_module+0x1147/0x15d0
 [<c0103ec0>] syscall_call+0x7/0xb
 =======================
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03cb591>] kobject_shadow_add+0x101/0x1a0
 [<c01375a8>] mod_sysfs_setup+0x18/0xb0
 [<c0138907>] sys_init_module+0x1147/0x15d0
 [<c0103ec0>] syscall_call+0x7/0xb
 =======================
ACPI: PCI Interrupt 0000:00:14.2[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ieee80211_crypt: registered algorithm 'NULL'
b44.c:v1.01 (Jun 16, 2006)
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:08:00.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
eth0: Broadcom 4400 10/100BaseT Ethernet 00:19:b9:88:ce:b3
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:08:01.0[B] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
mmc0: SDHCI at 0xc0302000 irq 11 DMA
bcm43xx driver
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:05:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
Adding 489940k swap on /dev/sda5.  Priority:-1 extents:1 across:489940k
spurious 8259A interrupt: IRQ7.
EXT3 FS on sda3, internal journal
input: PC Speaker as /class/input/input2
input: PS/2 Synaptics TouchPad as /class/input/input3
lp: driver loaded but no devices found
Capability LSM initialized
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS-fs error (device sda6): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device sda6): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device sda6): ntfs_fill_super(): Not an NTFS volume.
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
hda-intel: Invalid position buffer, using LPIB read method instead.
I'm using the LInux bootLOader.

This is my problem:

During the install, setup found some NTFS-partitions (check fstab), so I
gave them a mounting-point. After booting Linux, the only two partitions
that Konqueror (~storage media) could mount were C: and H: (sda2 and sda6). I can not explore my root partition (sda3) with Konqueror (but I do can if I press the HOME button on my panel.). I'm also not able to mount my cd-rom. I've had the same problem on another computer so I guess
I'm doing something completely wrong!

Thanks
 
Old 09-17-2007, 12:30 PM   #2
zaqwe
Member
 
Registered: Aug 2007
Distribution: Ubuntu 7.10
Posts: 43

Rep: Reputation: 15
1. Have u tried to mount those H: and C: manually?
2. Normal user doesn't have read permission for root as a default, so you have to add your user into group root, in /etc/group
3. Doesn't the cdrom mount automaticly when you put your cd in?
 
Old 09-17-2007, 12:56 PM   #3
phodopus
Member
 
Registered: Aug 2006
Location: Belgium
Distribution: Slackware 13.0
Posts: 62

Original Poster
Rep: Reputation: 15
1) It's not a problem to mount C: and H:, they mount automatically. I can't mount sda3 and my cdrom in Konqueror.

2) I always log in as root, so I should be ab
le to explore all my partitions (was able to view them with Slackware 11.0)

3)If I insert a cd-rom, he shows the label (for exemple: Slack12DVD).If I click on it, I get following message:

Quote:
A security policy in place prevents this sender from sending this message to this recipient, see message bus configuration file (rejected message had interface "org.freedesktop.Hall.Device.Volume" member "Mount" error name "(unset)" destination org.freedesktop.hall")

Last edited by phodopus; 09-17-2007 at 12:57 PM.
 
Old 09-17-2007, 01:11 PM   #4
andrewld
LQ Newbie
 
Registered: Jul 2007
Distribution: Slackware-14.2
Posts: 18

Rep: Reputation: 1
Try either commenting out the cdrom line in fstab or changing owner to users.

HTH

Andrew
 
Old 09-17-2007, 01:24 PM   #5
phodopus
Member
 
Registered: Aug 2006
Location: Belgium
Distribution: Slackware 13.0
Posts: 62

Original Poster
Rep: Reputation: 15
I rebooted and uncommented the line, with no succes...
 
Old 09-17-2007, 10:58 PM   #6
T3slider
Senior Member
 
Registered: Jul 2007
Distribution: Slackware64-14.1
Posts: 2,367

Rep: Reputation: 841Reputation: 841Reputation: 841Reputation: 841Reputation: 841Reputation: 841Reputation: 841
Please read the stickied thread on HAL at the top of this forum. It has specific instructions to solve everything. Try and read the whole thread -- it solves your root partition access more toward the end while solving the CD accessing problem closer to the beginning.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
What's a good way to set up partitions for multiple Linux distros? ericthefish Linux - Software 2 08-12-2007 11:44 AM
Does PHP make good friends with bash? Alexander.s Programming 4 04-27-2005 04:40 PM
Good method for deciding partitions? Zaskar Fedora 3 02-22-2005 04:15 PM
Easy/Good way to make bootable backup of partitions jimdaworm Slackware 3 03-28-2004 10:53 AM
slackware partitions mortal Slackware - Installation 2 03-16-2004 08:04 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 02:08 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration