LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 09-22-2005, 08:12 PM   #16
comcipher
LQ Newbie
 
Registered: Sep 2005
Distribution: Slackware 10.2
Posts: 6

Rep: Reputation: 0

Here are the outputs of those commands:

root@slackbox:~# lsmod
Module Size Used by
snd_pcm_oss 46240 0
snd_mixer_oss 15872 1 snd_pcm_oss
ipv6 225600 10
ohci_hcd 18436 0
intel_agp 19356 1
usb_storage 68416 0
usblp 10880 0
uhci_hcd 29584 0
ehci_hcd 29704 0
shpchp 91364 0
i8xx_tco 6036 0
tpm_atmel 4608 0
tpm_nsc 5504 0
tpm 7584 2 tpm_atmel,tpm_nsc
i2c_i801 7948 0
i2c_core 16656 1 i2c_i801
snd_intel8x0 27968 2
snd_ac97_codec 75388 1 snd_intel8x0
snd_pcm 75016 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 19716 2 snd_pcm
snd 45572 8 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6880 1 snd
snd_page_alloc 7556 2 snd_intel8x0,snd_pcm
ohci1394 30388 0
ieee1394 85304 1 ohci1394
skge 32656 0
sk98lin 160992 0
tulip 48032 0
pcmcia 30368 0
firmware_class 7424 1 pcmcia
yenta_socket 21516 0
rsrc_nonstatic 11136 1 yenta_socket
pcmcia_core 34320 3 pcmcia,yenta_socket,rsrc_nonstatic
isofs 32056 1
zlib_inflate 17024 1 isofs
nls_utf8 1792 2
evdev 7296 0
ntfs 182672 2
agpgart 28616 1 intel_agp
psmouse 29956 0
ext3 122504 1
jbd 48024 1 ext3



And here is lspci -v:

root@slackbox:~# lspci -v
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [2106]
Capabilities: [a0] AGP version 3.0

00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: d7f00000-f7efffff

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at ef00 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at ef20 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at ef40 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at ef80 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 5
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 40000000-400fffff

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at fc00 [size=16]
Memory at 40100000 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 5
I/O ports at efe0 [size=8]
I/O ports at efac [size=4]
I/O ports at efa0 [size=8]
I/O ports at efa8 [size=4]
I/O ports at ef60 [size=16]

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Flags: medium devsel, IRQ 5
I/O ports at 0400 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc.: Unknown device 812a
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at e800 [size=256]
I/O ports at ee80 [size=64]
Memory at febff800 (32-bit, non-prefetchable) [size=512]
Memory at febff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0002
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 11
Memory at e8000000 (32-bit, prefetchable) [size=128M]
I/O ports at c000 [size=256]
Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d7f00000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 2

01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
Subsystem: ATI Technologies Inc: Unknown device 0003
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Memory at fe8e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 808a
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at dc00 [size=128]
Capabilities: [50] Power Management version 2

02:04.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02)
Subsystem: ASUSTeK Computer Inc. K8V Deluxe/PC-DL Deluxe motherboard
Flags: bus master, 66Mhz, medium devsel, latency 96, IRQ 5
I/O ports at df00 [size=64]
I/O ports at dfa0 [size=16]
I/O ports at d880 [size=128]
Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Memory at feac0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2

02:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 5
Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
I/O ports at d400 [size=256]
Expansion ROM at 40080000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data

02:09.0 Communication controller: Conexant HCF 56k Data/Fax Modem (rev 08)
Subsystem: Diamond Multimedia Systems: Unknown device 0abe
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at feae0000 (32-bit, non-prefetchable) [size=64K]
I/O ports at dfe0 [size=8]
Capabilities: [40] Power Management version 2

02:0c.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
Subsystem: Kingston Technologies: Unknown device f002
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d000 [size=256]
Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 40000000 [disabled] [size=256K]

02:0d.0 Ethernet controller: Lite-On Communications Inc LNE100TX [Linksys EtherFast 10/100] (rev 25)
Subsystem: Kingston Technologies: Unknown device 000b
Flags: bus master, stepping, medium devsel, latency 64, IRQ 5
I/O ports at de00 [size=256]
Memory at feaff000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 40040000 [disabled] [size=256K]
Capabilities: [44] Power Management version 1

If there is a better way to format that please let me know. I could also put up text files for download if it would help.
 
Old 09-22-2005, 08:44 PM   #17
redjokerx
Member
 
Registered: Aug 2004
Location: San Diego
Distribution: Slackware
Posts: 303

Original Poster
Rep: Reputation: 31
comcipher... why so many network cards in the first place? Why don't you simplify it and use the onboard one... I think it's the Marvell one. If that doesn't work, then try each of the other cards one by one.

On another note, I tried installing my friend's gigE network card (NS DP83820 card using the ns83820 driver) and disabled the bcm and tg3 driver... it still dosn't work.

gotta find somebody with a spare 10/100 nic.
 
Old 09-22-2005, 09:42 PM   #18
comcipher
LQ Newbie
 
Registered: Sep 2005
Distribution: Slackware 10.2
Posts: 6

Rep: Reputation: 0
The only reason I have so many network cards is because i'm in a dorm on a school network that doesn't allow routers. When I need to connect to an xbox, I have a crossover cable and ICS running in windoze. The other extra card is for the same thing, perhaps to a laptop. The onboard gigabit ethernet adapter is hooked into the network here, and that is what I am trying to use for internet. I've tried all the other cards as well without any luck. It's a big pain in the ass not having network / internet access when i'm in linux, it's pretty much the only thing holding me back from using it alot more often.
 
Old 09-23-2005, 02:16 AM   #19
redjokerx
Member
 
Registered: Aug 2004
Location: San Diego
Distribution: Slackware
Posts: 303

Original Poster
Rep: Reputation: 31
take out the other cards and just try getting the gigE working. I think I saw an option for the maxell chip in the gigabit ethernet section of the device drivers. Just try one card at a time until your internet works. Once it does, you can add the other cards and try out networking... plus ask for help when you need it. You can also get a switch. That's what my friend does. NIC1 for the outside, NIC2->Switch->other computers for the inside network. And, to save you trouble (hopefully) maybe you can use a switch instead of a router for your network? That worked for me when I was in the dorms. Heh... and also make sure you're not using your crossover when you don't mean to

Anybody get any ideas on my situation?
 
Old 09-23-2005, 05:36 AM   #20
redjokerx
Member
 
Registered: Aug 2004
Location: San Diego
Distribution: Slackware
Posts: 303

Original Poster
Rep: Reputation: 31
"good news"

I decided to install slackware 10.1 and slowly upgrade to 10.2 one software set at a time. That way, if it craps out, I know what caused it. "Luckily" for me, it happened right at the beginning with the A series

I'll install the A series a few packages at a time and let you guys know what I find out.

EDIT: I forgot to mention that 10.1 works fine.
 
Old 09-23-2005, 04:26 PM   #21
redjokerx
Member
 
Registered: Aug 2004
Location: San Diego
Distribution: Slackware
Posts: 303

Original Poster
Rep: Reputation: 31
OK, I found out that the kernel packages (ide-2.4.31 and modules) screw up my network somehow. I upgraded to 2.6.13 from the 2nd cd and now the network is working.

I'm upgrading the rest of the packages right now and will let you guys know if anythings screws up again.

SIDENOTE: when I had psmouse as a module, my cursor kept jumping around. Anything like that happen to you guys?
 
Old 09-23-2005, 05:51 PM   #22
dive
Senior Member
 
Registered: Aug 2003
Location: UK
Distribution: Slackware
Posts: 3,390

Rep: Reputation: Disabled
Quote:
Originally posted by redjokerx

SIDENOTE: when I had psmouse as a module, my cursor kept jumping around. Anything like that happen to you guys?
I had this problem too. Solved it by

Option "Protocol" "ExplorerPS/2"
 
Old 09-23-2005, 06:36 PM   #23
redjokerx
Member
 
Registered: Aug 2004
Location: San Diego
Distribution: Slackware
Posts: 303

Original Poster
Rep: Reputation: 31
What's ExplorerPS/2 supposed to be for? MS Explorer mice? I fixed it after I compiled it in (along with other changes that might not have affected psmouse)
 
Old 09-24-2005, 06:50 PM   #24
tgrigsby
LQ Newbie
 
Registered: Oct 2004
Posts: 3

Rep: Reputation: 0
This is probably a stupid suggestion, but if the router is wireless or otherwise controls DHCP interaction via MAC address, have you registered the MAC of your network card with the router?
 
Old 09-25-2005, 04:43 AM   #25
redjokerx
Member
 
Registered: Aug 2004
Location: San Diego
Distribution: Slackware
Posts: 303

Original Poster
Rep: Reputation: 31
the computer works with windows and it has worked before. I kinda fixed it by upgrading from slack 10.1 but skipping the kernel 2.4 packages.
 
Old 12-21-2005, 01:40 AM   #26
redjokerx
Member
 
Registered: Aug 2004
Location: San Diego
Distribution: Slackware
Posts: 303

Original Poster
Rep: Reputation: 31
I've installed Slack 10.2 twice in the past few days and I noticed something that kinda backs up my "solution" earlier. There seems to be a problem with the 10.2's 2.4 kernel when it comes to the network. 10.2's stock 2.6.13's kernel works just fine. I thought I had to use other kernels or compile myself. Well... less things for me to do
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
vsftp - Can access FTP within office network BUT cant access via Internet! kokfei77 Red Hat 2 03-07-2012 07:24 PM
how to configure my network on slackware 10.0 so i can access a windows network salviadud Linux - Newbie 2 02-11-2005 01:19 PM
Connection to access point OK, but cannot access the network/internet Nymphetamine Linux - Wireless Networking 29 01-13-2005 02:59 PM
Can't access webserver IN network (slackware/apache) hcubed Linux - Networking 5 04-14-2004 04:20 PM
Modem access as well as network access NelsonN Mandriva 5 12-01-2003 07:55 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 11:08 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration