LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 10-24-2007, 11:10 AM   #1
Mr_Weirdo
LQ Newbie
 
Registered: Oct 2007
Distribution: Slackware
Posts: 15

Rep: Reputation: 0
SATA II harddrive not detected Slackware 12


Hej all,

I have a problem to install Slackware 12 (from DVD), it doesn't detect my SATA II hard drive. Same problem with Slackware 11 and Ubuntu 7.04 (windows xp has no problem finding hard drive)

S775 Asrock MB with VIA VT8237S South Bridge
500g Western Digital hd (also tried with Maxtor 200g)
Tried jumpering my HD to SATA I, but same problem.

fdisk -l has no output

Maybe the VT8237 isn't supported in the standard Slackware 12 kernel??
(maybe useless to say but via vmware in Windows xp slackware detects my HD)
Can someone help me?

Thanks
 
Old 10-24-2007, 11:27 AM   #2
onebuck
Moderator
 
Registered: Jan 2005
Location: Summer Midwest USA, Central Illinois, Winter Central Florida
Distribution: SlackwareŽ
Posts: 13,763
Blog Entries: 37

Rep: Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946
Quote:
Originally Posted by Mr_Weirdo View Post
Hej all,

I have a problem to install Slackware 12 (from DVD), it doesn't detect my SATA II hard drive. Same problem with Slackware 11 and Ubuntu 7.04 (windows xp has no problem finding hard drive)

S775 Asrock MB with VIA VT8237S South Bridge
500g Western Digital hd (also tried with Maxtor 200g)
Tried jumpering my HD to SATA I, but same problem.

fdisk -l has no output

Maybe the VT8237 isn't supported in the standard Slackware 12 kernel??
(maybe useless to say but via vmware in Windows xp slackware detects my HD)
Can someone help me?

Thanks
Hi,

Which kernel are you using, the default for the installer?

Code:
 excerpt for the 2.6.21.5-smp;

cat /usr/src/linux/.config | grep -i VIA
# CONFIG_MVIAC3_2 is not set
CONFIG_VIA_FIR=m
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_SATA_VIA=y
.
.
.
Both huge kernels have the VIA chipset support for SATA. Both of the generic kernels support the VIA.

Did you read the Slackware 12.0 CHANGES_AND_HINTS.TXT, UPGRADE.TXT and RELEASE_NOTES?
 
Old 10-24-2007, 11:29 AM   #3
H_TeXMeX_H
LQ Guru
 
Registered: Oct 2005
Location: $RANDOM
Distribution: slackware64
Posts: 12,928
Blog Entries: 2

Rep: Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292
Try 'cfdisk' instead.
 
Old 10-24-2007, 01:09 PM   #4
Mr_Weirdo
LQ Newbie
 
Registered: Oct 2007
Distribution: Slackware
Posts: 15

Original Poster
Rep: Reputation: 0
Hey onebuck thanks for replying,

I am using the default hugesmp.s kernel when i boot from the DVD.

I found some maybe interesting lines at startup from dvd:
"Creating /dev/mapper/control character device with major:10 minor:62
Reading all physical volumes. This may take a while..
No volume groups found" (is this normal?)

I see a lot of raid comments in the boot while i ain't using raid.

Hey H_TeXMeX_H also thanks for replying,
cfdisk automatically reads my dvd.
cfdisk /dev/sda or sda1 or sdb etc can't find.
 
Old 10-26-2007, 08:13 AM   #5
Mr_Weirdo
LQ Newbie
 
Registered: Oct 2007
Distribution: Slackware
Posts: 15

Original Poster
Rep: Reputation: 0
I read the Slackware 12.0 CHANGES_AND_HINTS.TXT, UPGRADE.TXT and RELEASE_NOTES but coudn't find any solution.
 
Old 10-26-2007, 08:37 AM   #6
onebuck
Moderator
 
Registered: Jan 2005
Location: Summer Midwest USA, Central Illinois, Winter Central Florida
Distribution: SlackwareŽ
Posts: 13,763
Blog Entries: 37

Rep: Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946Reputation: 2946
Quote:
Originally Posted by Mr_Weirdo View Post
I read the Slackware 12.0 CHANGES_AND_HINTS.TXT, UPGRADE.TXT and RELEASE_NOTES but coudn't find any solution.
Hi,

You could post the output for dmesg to let us see what is happening.
 
Old 10-26-2007, 09:40 AM   #7
Mr_Weirdo
LQ Newbie
 
Registered: Oct 2007
Distribution: Slackware
Posts: 15

Original Poster
Rep: Reputation: 0
dmesg:
Quote:
ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 6000701 MSFT 97)
ACPI: OEMB 3FFC0040, 0051 (r1 A M I AMI_OEM 6000701 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists. Total pages: 260017
Kernel command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 rw SLACK_KERNEL=hugesmp.s BOOT_IMAGE=/kernels/hugesmp.s/bzImage
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fecc0000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2009.101 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023984k/1048256k available (6215k kernel code, 23628k reserved, 2017k data, 392k init, 130752k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0915000 - 0xc0977000 ( 392 kB)
.data : 0xc0711c79 - 0xc090a38c (2017 kB)
.text : 0xc0100000 - 0xc0711c79 (6215 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4020.81 BogoMIPS (lpj=8041625)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.27 BogoMIPS (lpj=8036557)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
Total of 2 processors activated (8039.09 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=19
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
pnp: 00:08: iomem range 0xfecc0000-0xfecc0fff has been reserved
pnp: 00:08: iomem range 0x0-0x0 could not be reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0f: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
ieee1394: Initialized config rom entry `ip1394'
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fd000000-feafffff
PREFETCH window: f0000000-f7ffffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: fbf00000-fbffffff
PCI: Bridge: 0000:00:13.1
IO window: e000-efff
MEM window: feb00000-febfffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5233k freed
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/W].
JFS: nTxBlock = 8043, nTxLock = 64344
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jun 19 2007 14:57:33) installed
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 7
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237s (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: ATAPI 126X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 50X DVD-ROM drive, 256kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.11
Copyright(c) 2004-2006 Emulex. All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
st: Version 20070203, fixed bufsize 32768, s/g segs 256
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 17, io mem 0xfcfffc00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 18
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 18, io base 0x0000c480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 19, io base 0x0000c800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 17, io base 0x0000c880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 20, io base 0x0000cc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /class/input/input1
raid6: int32x1 792 MB/s
raid6: int32x2 792 MB/s
raid6: int32x4 629 MB/s
raid6: int32x8 586 MB/s
raid6: mmxx1 2583 MB/s
raid6: mmxx2 2975 MB/s
raid6: sse1x1 1758 MB/s
raid6: sse1x2 2291 MB/s
raid6: sse2x1 3220 MB/s
raid6: sse2x2 3595 MB/s
raid6: using algorithm sse2x2 (3595 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 7486.000 MB/sec
raid5: using function: pIII_sse (7486.000 MB/sec)
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 392k freed
I hope this helps
 
Old 10-28-2007, 06:18 AM   #8
ghostdancer
Member
 
Registered: Apr 2002
Distribution: Slackware
Posts: 266

Rep: Reputation: 30
Your card is not being detected by the kernel. It maybe a new SATA card, unsupported yet.
 
Old 10-28-2007, 07:01 AM   #9
Mr_Weirdo
LQ Newbie
 
Registered: Oct 2007
Distribution: Slackware
Posts: 15

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by ghostdancer View Post
Your card is not being detected by the kernel. It maybe a new SATA card, unsupported yet.
Hej Ghostdancer,
I am the guy with the empty /lib/modules, could it be that thats the problem?
cause its not a new mobo
 
Old 10-28-2007, 07:24 AM   #10
ghostdancer
Member
 
Registered: Apr 2002
Distribution: Slackware
Posts: 266

Rep: Reputation: 30
Is not the issue on whether your mainboard is new or old. The problem here is, the SATA controller is not detected. Either the SATA controller is too new for kernel 2.6.21 or is too obscure for kernel developer to support it.

Check:

http://linux-ata.org/driver-status.html

For supported SATA controller that supported by Linux.
 
Old 10-28-2007, 08:08 AM   #11
ghostdancer
Member
 
Registered: Apr 2002
Distribution: Slackware
Posts: 266

Rep: Reputation: 30
It is possible, some bios setting is blocking the detection.
 
Old 10-28-2007, 08:17 AM   #12
Mr_Weirdo
LQ Newbie
 
Registered: Oct 2007
Distribution: Slackware
Posts: 15

Original Poster
Rep: Reputation: 0
Unhappy

Quote:
Originally Posted by ghostdancer View Post
It is possible, some bios setting is blocking the detection.
There ain't so much to configure in the bios.
Only sata enable disable and raid enable disable, thats it.
Crappy VIA !
 
Old 10-28-2007, 08:25 AM   #13
ghostdancer
Member
 
Registered: Apr 2002
Distribution: Slackware
Posts: 266

Rep: Reputation: 30
I see.

Is possible to tell us what the current setup in the bios?
 
Old 10-28-2007, 09:09 AM   #14
H_TeXMeX_H
LQ Guru
 
Registered: Oct 2005
Location: $RANDOM
Distribution: slackware64
Posts: 12,928
Blog Entries: 2

Rep: Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292Reputation: 1292
I think this is a bad install. '/lib/modules' should not be empty. Are you sure the kernel and kernel modules were installed properly ?
 
Old 10-28-2007, 09:11 AM   #15
ghostdancer
Member
 
Registered: Apr 2002
Distribution: Slackware
Posts: 266

Rep: Reputation: 30
Quote:
Originally Posted by H_TeXMeX_H View Post
I think this is a bad install. '/lib/modules' should not be empty. Are you sure the kernel and kernel modules were installed properly ?
He has not installed Slackware yet, since the installer can't detect the SATA disk.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Abit IB9 - SATA DVD and SATA HD not detected motim Fedora - Installation 1 05-17-2007 09:28 PM
Help a n00b install Slackware 10.2 on SATA harddrive please! asilentmurmur Slackware 5 03-21-2006 04:54 PM
USB Harddrive detected, not in /dev Phaux Linux - Hardware 2 01-04-2006 05:49 PM
Linux Installation FAILURE harddrive not detected lysol Linux - Hardware 35 07-30-2004 04:19 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 07:40 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration