Hi i have got some problems with k3b.
It did work fine in my last kernel 2.6.2 but after i had change to 2.6.3 my problems begone.
Have check all in the kernel but i cant find any problem there. I have tryed diffrent k3b version but i dosn't work.

run k3b in the terminal .


k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bExternalBinManager) Cdrecord 2.0.3 features: gracetime, overburn, cdtext, suidroot, plain-atapi, hacked-atapi
k3b: (K3bExternalBinManager) 2 0 3 seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
k3b: (K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
k3b: (K3bExternalBinManager) Cdrecord 2.0.3 features: gracetime, overburn, cdtext, suidroot, plain-atapi, hacked-atapi
k3b: (K3bExternalBinManager) 2 0 3 seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
k3b: (K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
k3b: /dev/sr0 resolved to /dev/sr0



Do somebody has an answer to my problem ?
My version of kde is 3.2 .


/ Teo

P.s. My English is not the best hope you understand what i mean D.S.

you have not told us what the probleam actually is.. those output messages look just fine...

the problem is that k3b freezes when it search for the cd devices and later on dies.
All seams fine but it isn't .

Could i have forgot something.

/ Teo

I have found the problem it was scsi-emulation i the kenel.

thanks anyway

/ teo

S_Warlock, as I have the same problem, would you be so kind to explain, what have you actually done to make K3b work?
Thanks in advance.

I have the same problem with 2.6.3 but i don't have scsi emulation built in or as a module...
And I tried to compile the kernel twice, one with scsi emulation but nothing...

I just removed the scsi emulation from the kernel and compiled the kernel.

then I changes this line in lilo.conf
append="hdc=ide-scsi"
changed it to
append="hdx=ide-scsi"


Good luck

=)

/ Teo