Problem with Slack 10.1
Okay,
I've installed Slackware perfectly, infact 5 times today. I configured everything right. I logged in, and KDE started up fine, but my mouse wouldn't work, It was "hugging" the sides of my monitor. So I stoped X, and re-configured it with the command 'xorgconfig'. I changed my mouse settings around and left everything else the same. So than I restarted my computer and booted up on Linux, so I logged in as root and used the command 'startx' to see if my mouse would work, but now all I get is a blank screen, and nothing. I am really not sure what is going on, so I re-installed linux (deleting the old linux files), I did this 5 times, and each time had the same results. I have no idea what I am doing wrong, can anyone figure this out. If you need more specific imformation please ask! Thanks. |
well...to start: what's the type of mouse you're using ?
and did it work on previous installs of Slackware ? and maybe can you post the mouse section of your xorg.conf file ? egag |
Wow quick responce. Ahh, I forgot to tell you my mouse :p It's a Logitech USB Combo. I can't post a section of my xorg.conf though.
|
Did you try selecting USB Mouse during the install?
MagicMan |
An idea.
Re-install a sixth time. (shouldn't take long. You're a pro by now.) Do all the configuring that you did before. When you get to the part where you are about to run "xorgconfig" again, STOP! Everything is already working except for the mouse, right? Just start editing /etc/X11/xorg.conf manually to fix your problem. Step 1) Code:
cp /etc/X11/xorg.conf /etc/X11/xorg.conf.orig Open up /etc/X11/xorg.conf in a text editor. You'll see a section that looks like this: Code:
# ********************************************************************** Also, what is the output of: Code:
ls -l /dev/mouse |
I have a similar problem but when I install NVIDIA drivers. My X11 got blank screen with mouse cursor. (Default WM is fluxbox)
dmesg: Nothing wrong X.org.log: No (EE) Anyone can help? P.S. It was my third time of installing Slackware 10.1. Thanks. |
@kaon
What is your card's model? If it's an MX 440, a TNT2 (and perhaps other models too) and you're trying to use the 6629 version you get that black screen which is a known bug. |
To bathory:
Mine is Nvidia GeForce FX5500. If I remember correctly, I did the same thing using Slackware 10.0. In past 2 days, I did a fresh install of 10.1 on my drive, without configuring too much, my X11 went blank. :mad: Now I did a new fresh install. :mad: [EDITIED] fluxbox took a long time (10 - 15 seconds) to load in Slackware 10.1 after several times of 'startx'. Seems strange. P.S. is 10.1 really stable? |
NVIDIA 6629 does not work for me with a MX400, I find that 6111 is fine. The symptom is that the Nvidia splash remains in view behind the KDE world/gear startup and then some of the bars get shredded.
|
What kernel do you use? 2.6.10 or 2.4.29?
AFAIK there have been reports on serious USB problems with 2.6.10, so you might want to downgrade, if you have that kernel... gargamel |
Quote:
alright, I am going to try that... hope it works ! Edit: What the heck is wrong with slack10.1, I set everything up right, now I only get a black screen with light on the right side, but I can't see anything! |
Quote:
Laptop is running Slack 10.1, and the two desktops are running 10.0. Um... when you configured 2.6.10, did you disable human interface devices? Never did figure out why they call them that, but that refers to USB keyboards and mouses. As for "setting everything up", I'm not entirely sure. But try making a backup of your xorg.conf file (it's in /etc/X11), and using one of the preconfigured xorg.conf files that's sitting in that directory without changing anything. I'd suggest the VESA one, since that's most likely to work on your box. |
how do I make it use the Vesa conf?
|
Okay right... Errr, I re-installed it yet again, tried
Code:
xorgsetup Code:
startx Code:
xorgconfig Code:
startx I got Slack 10.0 working, Arch linux working, just not this.... |
Have you tried unplugging your usb mouse and using a serial mouse instead? That might help narrow down the issue.
|
OK Lintux
1. Linux means NEVER re-installing to fix a little problem - this isn't MSLand :-) 2. Please, please nicely, post the mouse section of /etc/X11/xorg.conf The solution to your problem almost certainly lies in sorting out that file. You said earlier that you could not do so - why? We only need the uncommented lines, ie those that don't begin with a # Typing those out will take you far less time than re-installing :-) 3 What IS the output of Code:
ls -l /dev/mouse |
Hello.
To have your original configuration, and start your x without problems, you should run the "xorgsetup" command... it should work, otherwise, you should run "xorgconfig" and choose correctly all your computer components. About the mouse, you should edit the "/etc/X11/xorg.conf", and change the part relative to the mouse: " Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" EndSection " This is my configuration... from my laptop. It works really well (usb and touchpad), maybe for you you need to exchange the "Protocol" -> "ImPS2" and the "Device" -> "/dev/mouse"... but try the several combinations! I think you just need to try (and combine) this options, and it will work... See you. /Edu |
Quote:
The long answer: Code:
#cd /etc/X11 |
All times are GMT -5. The time now is 01:10 PM. |